Page 1
Safety Instructions
Customer Service
Product May V a ry
Slightly From Pictured.
Operation
Warranty
SAFETY INSTRUCTIONS
WARNING: Weight limit is not applicable if product is used properly. This unit
is not designed to support a user's weight. To reduce the risk of
serious injury, please read all safety instructions before using.
1.
Read this Owner's Ma nual and follow it carefully bef ore using the inSTRIDE CYCLE XL.
2.
Do not stand up on the inSTRIDE CYCLE XL.
3.
Keep children away from the inSTRIDE CYCLE XL. Do not allow children to use or
play around the inSTRIDE CYCLE XL. Keep children and pets away from the
inSTRIDE CYCLE XL when it is in use.
4.
Set up and operate the inSTRIDE CYCLE XL on a solid level surface or table. Do
not position the inSTRIDE CYCLE XL on loose rugs or uneven surfaces.
5.
Inspect the inSTRIDE CYCLE XL for damaged or loose components prior to use.
6.
Tighten/repla ce any loose or worn components prior to using the inSTRIDE CYCLE XL.
7.
The surface of the crank housing may become hot during use, so allow it to cool
before moving.
8.
Consult a physicia n prior to commencing an exercise progra m. If, at a ny time during
exercise, you feel faint, dizzy, or experience pain, stop and consult your physici an.
9.
Always choose the workout which best fits your physical strength and flexibility
level. Know your limits and train within them. Always use common sense when
exercising.
10.
Do not wear loose or dangling clothing while using the inSTRIDE CYCLE XL.
11.
Never exercise with bare feet or socks. Always wear appropri ate footwear .
12.
The inSTRIDE CYCLE XL should be used by only one person at a time.
13.
The inSTRIDE CYCLE XL is for consumer use only. It is not for use in public or
semipublic facilities.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
parts@staminaproducts.com
2009, 12
www.stamin aproducts.com
When calling for parts or
service, please specify the
following model number:
15 - 0120A
MADE IN CHINA
2009 Stamina Products, Inc.
Page 2
ASSEMBLY & OPERATIONAL INSTRUCTIONS
STEP 1:
STEP 2:
STEP 3:
NOTE:
CAUTION:
Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure
with BUTTON HEAD BOL TS(M8x1.25x12mm)(16) a nd ARC WASHERS(M8)(17).
DO NOT TIGHTEN COMPLETELY.
Adjust the STAND CAPS(3), set the inSTRIDE CYCLE XL on the floor a nd tighten
the bolts.
Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).
Slide the TIMER(18) onto the plate on the MAIN FRAME(1).
There are two adjustment holes on ea ch side of the PEDAL STRAPS(12). Sele ct
the adjustment holes which allow your feet to be easily removed from the
PEDALS(11).
The surface of the cra nk housing may become
hot during use, so allow it to cool before
moving. Read the cautions posted on the
inSTRIDE CYCLE XL.
Caution Decal
(both sides)
2
Page 3
ASSEMBLY & OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the intensity of your workout, turn the T KNOB(14) clockwise. To decrease
the resistance, turn the T KNOB(14) counterclockwise.
USING THE ELECTRONIC TIMER
TIMER Function:
To time your workout, begin by pressing and holding the
1.
button on the face of the timer until zeros are displayed.
Release the button.
Start the timer by pressing and releasing the button. Now
2.
you are ready to begin your workout.
T o stop or pause the ti mer , press and rele a se the timer button. This freezes the workout
3.
time. To resume your workout without losing the time displayed before stopping or
pausing, press and release the button again.
When you complete your workout, press and release the timer button. The timer will
4.
automatically turn off after being in stop or pause mode for 4 minutes.
NOTE: Even after the timer automatically turns off, the ti me that was displayed prior to
shut off will remain in memory . To resume your workout without losing the time displayed
before stopping, press and release the timer button. To clear the time and start a new
workout, start again at step 1.
BATTERY:
The electronic timer displays minutes and
seconds up to 99.59.
The electronic timer operates with a 3v CR2032 mercury battery. Replace the
battery when you see inconsistencies in the display.
MAINTENANCE
The safety and integrity designed into the inSTRIDE CYCLE XL can only be maintained
when the inSTRIDE CYCLE XL is regularly examined for damage and wear. Special
attention should be given to the following:
1.
A light oil is a pplied to the pedals of your inSTRIDE CYCLE XL before shi pping. Rea pply
oil if the pedals begin squeaking.
2.
Verify that all nuts and bolts are properly tightened.
3.
Use only Stamina Products components for maintenance and repair. For replacement
parts, contact us at parts@staminaproducts.com or call 1-800-375-7520.
4.
Keep your inSTRIDE CYCLE XL clean by wiping with an absorbent cloth after use.
3
Page 4
Product Parts Drawing and Parts List
FRONT
BACK
Part No. and Description Qty Part No. and Description Qty
1
Main Frame 1
2
Stabilizer 2
3
Stand Cap (50.8mm) 4
4
Crank 1
5
Bottom Brake Block 1
6
Top Brake Block 1
7
Press Plate 1
8
Hub Cap 2
9
Nylon Washer (M12) 2
11
Pedal 2
12
Pedal Strap 2
13
Push Nut (1/2") 2
14
T Knob 1
15
Screw, Round Head (M4 x 12mm) 8
16
Bolt, Button Head (M8 x 1.25 x 12mm) 6
17
Arc Washer (M8) 6
18
Timer 1
19
Allen Wrench (6mm) 1
20
Owner's Manual 1
21
Workout Manual 1
22
E Clip (1/2") 2
23
Caution Decal 2
LIMITED WARRANTY
This product is warranted to be free from defects in materi al a nd workma n ship a nd to be in
perfect working order at the time of purchase. This warranty a pplie s to personal, family or
household use. This warranty does not apply to use in athletic clubs, health clubs, spas,
gymna siums, exercise facilities, and other public or semipublic facilities.
If the product should, for any reason, become defective within 90 days of purchase, the
manufa cturer will repla ce the product once it is returned to the manufa cturer . This warra nty
does not apply to any damage caused by accident, return transit, alteration, abuse, or
misuse. There are no other warranties other than those expressly set forth herein.
Products shipped to the manufacturer must be in the original shipping carton with freight
prepaid. All expen ses f or repairing or replacing the product, including the cost of shipping
it back to the origin al purchaser, will be covered by the manufacturer. This warranty gives
you specific legal rights, and you may have other rights which vary from state to state.
4
Loading...