Upper & Lower
Body Cycle
Product May V a ry
Slightly From Pictured.
Safety Instructions
Customer Service
Operation
Warranty
SAFETY INSTRUCTIONS
WARNING: To reduce the risk of serious injury, read the following Safety
Instructions before using the Upper & Lower Body Cycle.
1.
Read this Owner's Manual and follow it carefully before using the Upper & Lower Body
Cycle.
2.
Do not stand up on the Upper & Lower Body Cycle.
3.
Keep children away from the Upper & Lower Body Cycle. Do not allow children to use
or play around the Upper & Lower Body Cycle. Keep children and pets away from the
Upper & Lower Body Cycle when it is in use.
4.
Set up and operate the Upper & Lower Body Cycle on a solid level surface or table.
Do not position the Upper & Lower Body Cycle on loose rugs or uneven surfaces.
5.
Inspect the Upper & Lower Body Cycle for damaged or loose components prior to
use.
6.
Tighten/repla ce a ny loose or worn components prior to using the Upper & Lower Body
Cycle.
7.
The surface of the crank housing may become hot during use, so allow it to cool before
moving.
8.
Consult a physician prior to commencing an exercise program. If, at any time during
exercise, you feel faint, dizzy, or experience pain, stop and consult your physician.
9.
Always choose the workout which best fits your physical strength and flexibility level.
Know your limits and train within them. Always use common sense when exercising.
10.
Do not wear loose or dangling clothing while using the Upper & Lower Body Cycle.
11.
Never exercise with bare feet or socks. Always wear appropriate footwear.
12.
Be careful to maintain your balance while using or assembling the Upper & Lower
Body Cycle, loss of balance may result in a fall and serious bodily injury.
13.
The Upper & Lower Body Cycle should be used by only one person at a time.
14.
The Upper & Lower Body Cycle is for consumer use only. It is not for use in public or
semipublic facilities.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
2008, 09
Customer Service
1 (800) 375-7520
parts@staminaproducts.com
www.staminaproducts.com
When calling for parts or
service, please specify one of
the following model numbers:
15 - 0110A / 15 - 0110W
15 - 0110B / 15 - 0110BW
15-0110BGG
MADE IN CHINA
2008 Stamina Products, Inc.
ASSEMBLY & OPERATIONAL INSTRUCTIONS
STEP 1:
STEP 2:
NOTE:
CAUTION:
Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure
with BUTTON HEAD BOLTS(M6x1x12mm)(16) and ARC WASHERS(M6)(17).
DO NOT TIGHTEN COMPLETELY.
Adjust the STAND CAPS(3), set the Upper & Lower Body Cycle on the floor
and tighten the bolts.
Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).
There are two adjustment holes on ea ch side of the PEDAL STRAPS(12). Select
the adjustment holes which allow your feet to be easily removed from the
PEDALS(11).
The surface of the cra nk housing may become
hot during use, so allow it to cool before
moving. Read the cautions posted on the
Upper & Lower Body Cycle.
Caution Decal
(both sides)
2