Page 1
Owner's Manual
! WARNING !
Exercise can present a he alth
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
Model#: 55-5510C
Patent No. D382,319
Other patent(s) apply
& are pending
MADE IN CHINA
CAUTION:
We ight on this product should not exceed 300 lbs.
Product May Vary Slightly
From Pictured.
2009, 05
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
www.staminaproducts.com
2009 Stamina Products, Inc.
Page 2
TABLE OF CONTENTS
2
Warm-up and Cool-Down 10
Warranty 11
Product Parts Drawing 12
Parts List 13
Notes 14
Fax/Mail Ordering Form 15
Page Page
Safety Instruction s 2
Before You Begin 4
Assembly Instructions 5
Storage 8
Mainten ance 8
Conditioning Guidelines 9
Before starting any exercise or conditioning program you should consult with your personal
physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.
SAFETY INSTRUCTIONS
WARNING:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read this Owner's Ma nual and follow it carefully bef ore using the PILATES PREMIER XP
TM
. Make
sure that it is properly assembled and tightened before use.
Keep children away from the PILA TES PREMIER XP
TM
. Do not allow children to use or play on the
PILA TES PREMIER XP
TM
. Keep children a nd pets away from the PILATES PREMIER XPTM when
it is in use.
Set up and operate the PILATES PREMIER XP
TM
on a solid level surface. Do not position the
PILATES PREMIER XP
TM
on loose rugs or uneven surfaces.
Inspect the PILATES PREMIER XP
TM
for worn or loose components prior to use. Tighten/replace
any loose or worn components prior to using.
Consult a physician prior to commencing an exercise program. If, at any time during exercise, you
feel faint, dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your
limits and train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the PILATES PREMIER XP
TM
.
Be careful to maintain your balance while using, mounting, dismounting, or a ssembling the PILATES
PREMIER XP
TM
, loss of balance may result in a fall and serious bodily injury.
When folding or unfolding the PILATES PREMIER XP
TM
, keep all children away from the PILATES
PREMIER XP
TM
and make sure your hands are clear of any folding or pinch point.
The PILATES PREMIER XP
TM
should not be used by persons weighing over 300 pounds.
The PILATES PREMIER XP
TM
should be used by only one person at a time.
The PILATES PREMIER XP
TM
is for consumer use only. It is not for use in public or semipublic
facilities.
WARNING:
To reduce the risk of serious injury, read the following Safety Instructions before
using th
e PILATES PREMIER XPTM.
Page 3
CALL US FIRSTCALL US FIRST
CALL US FIRSTCALL US FIRST
CALL US FIRST
THANK YOU FOR PURCHASING THE
PILATES PREMIER XP
TM
To help you get started, we have pre-a ssembled most of your
PILATES PREMIER XPTM at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
Within a few minutes you will be getting your body into shape a nd on your
way to achieving a happier and healthier lifestyle.
Should you have any que stions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Friday, 8:00 A.M. - 5:00 P.M., Central Time.
3
Page 4
BEFORE YOU BEGIN
4
Rear Cover
Pulley
Assembly
Rope
Head Re st
Rear
Frame
Plastic
Wheel
Locking Pin
Foot Rest
Front Cover
Front Frame
Cushion
Assembly
Rope
Pulley Assembly
Tension Cord
Assembly
Foam Pad Assembly
Hand Strap
Hand Strap
Thank you f or choosing the
PILA TES PREMIER
XPTM. We take great pride in producing this quality
product and hope it will provide ma ny hours of quality
exercise to make you feel better , look better and enjoy
life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity to exercise. The
PILATES
PREMIER XPTM provides a convenient a nd si mple
method to begin your assault on getting your body in
sha pe and a chieving a ha ppier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the
PILATES PREMIER XPTM.
Although Stamina tries to manufacture its products
Although Stamina tries to manufacture its products
with the finest materials and uses the highest
standards of manufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M.
and 5:00 P.M. Central Ti me, Monday through Friday .
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.
Page 5
ASSEMBLY INSTRUCTIONS
5
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce them ba ck into the box. Do not dispose of the pa cking materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
STEP 1
Remove your PILATES PREMIER XPTM from its packaging placing the product on its side, with the
LOCKING PIN(26) side upward. Remove the LOCKING PIN(26) and unfold the MAIN FRAME
ASSEMBLY to a flat position by moving the FRONT FRAME(1) away from the platform end of the
product in a clockwise direction until fully extended.
WARNING:
When folding and unf olding the PILATES PREMIER XP
TM
, keep all children away from the
PILA TES PREMIER XP
TM
and ma ke sure your hands are cle ar of any folding or pinch point.
Page 6
ASSEMBLY INSTRUCTIONS
STEP 2
Remove the paper covering from the foam tape inside the FRONT COVER(7) and REAR COVER(8).
Place the FRONT COVER(7) over the FRONT FRAME(1). Press the FRONT COVER(7) securely in
place. Place the
REAR COVER(8) over the REAR FRAME(2). Press the REAR COVER(8) securely
in place.
NOTE:
The securing
SCREWS(M6 x 35mm)(37) for the PULLEY ASSEMBLY(22) on each side may
need to be loosened to allow the
REAR COVER(8) to fit securely over the frame. Refer to
illustration. When retightening the screws for the
PULLEY ASSEMBLY(22) do not over tighten.
The
PULLEY ASSEMBLY(22) should move freely.
STEP 3
Insert the FOOT REST(9) into the mounting holes located on the FRONT FRAME(1). The FOOT
REST(9) should pass through the FRONT COVER(7) and the FRONT FRAME(1).
STEP 4
Insert the FOAM PAD ASSEMBLIES(17) into the holes located on the CUSHION ASSEMBLY(10).
6
Page 7
ASSEMBLY INSTRUCTIONS
7
STEP 5
The HEAD REST(15) on the CUSHION ASSEMBLY(10) can be positioned at an incline by simply
pivoting the
SUPPORT BRACKET underneath the HEAD REST(15).
STEP 6
The resistance of the CUSHION ASSEMBLY(10) can be adjusted by securing the TENSION CORD
ASSEMBLIES(12) in the slots located on the FRONT FRAME(1). You can achieve various levels of
resistance by securing different numbers of the
TENSION CORD ASSEMBLIES(12) in the slots.
NOTE: To achieve greater resista nce in the
TENSION CORD ASSEMBLIES(12), stretch a nd re-tie the
tension cords in a more taut position.
STEP 7
Set up your PILA TES PREMIER XPTM on a flat even surface. Ma ke sure that adequate spa ce is available
for performing all the exercises. Also allow adequate spa ce for a ccess to and pa ssage around the
PILATES
PREMIER XPTM.
SUPPORT BRACKET
SLOTS
Page 8
8
STORAGE
Moving the PILATES PREMIER XPTM: To prevent the CUSHION ASSEMBLY(10) from moving,
attach one of the
TENSION CORD ASSEMBLIES(12) in the slots on the FRONT FRAME(1).
Move the PILA TES PREMIER XPTM with the moving wheels on the FRONT FRAME(1). Grasp on
the back end of the
REAR FRAME(2) to move the PILATES PREMIER XPTM.
The PILATES PREMIER XPTM can be folded for storage. To fold, remove all TENSION CORD
ASSEMBLIES(12) from the slots in the FRONT FRAME(1) and slide the CUSHION ASSEMBL Y
(10) toward the REAR FRAME(2). Turn the PILATES PREMIER XP
TM
on its side and fold as
shown in the illustration on page 5. Secure the
PILATES PREMIER XP
TM
in the folded position by
inserting the
LOCKING PIN(26) into the REAR FRAME(2).
To store the PILATES PREMIER XPTM simply keep it in a clean dry place.
1.
2.
3.
MAINTENANCE
The safety and integrity designed into the PILATES PREMIER XPTM can only be maintained when the
PILA TES PREMIER XP
TM
is regularly examined f or da mage a nd wear. Special attention should be given
to the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or da maged components shall be repla ced immediately or the
PILA TES PREMIER XP
TM
removed
from service until repair is made.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
Verify that the
ROPES(18) are properly installed on the PULLEY ASSEMBLYS(22).
Check the condition of the ROPES(18). Replace the Rope if it is cracked or broken.
Check the
TENSION CORD ASSEMBL YS(12) f or wear . Repla ce the Cords that are frayed or worn.
Check the pulleys for excessive wear. Replace worn pulleys.
Check the
HAND STRAPS(19) for damage. Replace damaged parts.
Check and clean the rollers and the rolling surfaces on the rail. Cle an by wiping with a dry cloth.
Only Stamin a Products supplied components shall be used to maintain/repair the
PILA TES PREMIER
XPTM.
Keep your PILATES PREMIER XPTM clean by wiping with an absorbent cloth after use.
Page 9
How you begin your exercise progra m depends on your physical condition. If you have been inactive for
several years, or are severely overweight, you must start slowly and increase your time on the
PILATES
PREMIER XP
TM
gradually: a few minutes per workout.
Initially, you may be able to exercise only for a few minutes in your target zone, however, your aerobic
fitness will improve over the next six to e ight weeks. Don't be discouraged if it ta kes longer . It's i mportant to
work at your own pace. Ultimately, you'll be able to exercise continuously for 30 minutes. The better your
aerobic fitness, the harder you will have to work to stay in your target zone. Please remember these
essentials:
Have your doctor review your training and diet programs to advise you of a workout routine you
should adopt.
Begin your training progra m slowly with realistic goals that have been set by you and your doctor.
Monitor your pulse frequently. Establish your target heart rate base on your age and condition.
Set up your
PILA TES PREMIER XP
TM
on a flat, even surface at least 3 feet from walls and furniture.
CONDITIONING GUIDELINES
9
To maximize the benefits of exercising, it is important to exercise with the proper intensity. The proper
intensity level can be found by using your heart rate as a guide. For effective aerobic exercise, your heart
rate should be maintained at a level between 70% and 85% of your maximum heart rate as you exercise.
This is known as your target zone. You can find your target zone in the table below . Target zones are listed
for both unconditioned and conditioned persons according to age.
EXERCISE INTENSITY
During the first few months of your exercise program, keep your
heart rate near the low end of your target zone as you exercise.
After a few months, your heart rate can be increased gradually
until it is near the middle of your target zone as you exercise.
T o mea sure your heart rate ma nually ,
stop exercising but continue moving
your legs or walking around and pla ce
two fingers on your wrist. Take a
six-second heartbeat count and
multiply the results by 10 to find your
heart rate. For example, if your
six-second heartbeat count is 14,
your heart rate is 140 beats per minute. (A six-second count is
used because your heart rate will drop rapidly when you stop
exercising.) Adjust the intensity of your exercise until your heart
rate is at the proper level.
Page 10
10
WARM-UP and COOL-DOWN
Warm-up The purpose of warming up is to prepare your body f or exercise and to mini mize injuries. W arm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscle s. Activitie s may include brisk walking, jogging, jumping ja cks, jump
rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of in jury . Stretches should be held for 15 to 30 seconds.
Do not bounce.
Suggested Stretching Exercise s
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of ea ch exercise se ssion. A proper cool-down slowly lowers your heart rate a nd allows blood to
return to the heart. Y our cool-down should include the stretche s listed above a nd should be completed after
each strength-training session.
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
DO NOT BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Over Leg Stretch
Stand with feet shoulderÂwidth a part and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to the
left leg. Do this stretch
several times slowly.
Bent Torso Pulls
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Page 11
LIMITED WARRANTY
MODEL 55-5510C
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT , SUBSTITUTION OR USE WITH P ARTS OTHER THAN P ARTS PROVIDED BY ST AMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilitie s, and other public or semi public facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not f or person al, family, or household
purposes.
T o i mplement this li mited warranty, send a written notice stating your name, date, a nd place of purchase and
a brief description of the defect along with your rece ipt to Stamin a Products, Inc. P .O. Box 1071, Springf ield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty , you will be requested to return the product or part to us f or free repair or repla cement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HA VE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this
limited warranty or a ny implied warra nty , the Warra ntor reserves the right to require the product to be returned
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of
establishing the date and place of purchase.
Stamin a Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENT AL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY IMPLIED
WARRANTY.
This limited warra nty is the only written or express warranty given by Stamina Products, Inc. This warra nty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANT ABILITY OR FIT NESS FOR A P ARTICULAR PURPOSE, IS LIMITED IN DURA TION TO THE
DURA TION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be a pplicable, the foregoing disclai mers and li mitations of a nd on implied warranties a nd
consequential a nd incidental da mages with respect thereto shall be disregarded a nd shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
WARRANTY
11
Page 12
PRODUCT PARTS DRAWING
12
FRONT
BACK
Page 13
PARTS LIST
DIAGRAM# PART NAME QTY
13
1 Front Frame 1
2 Rear Frame 1
3 Front Left Side Rail 1
4 Front Right Side Rail 1
5 Rear Left Side Rail 1
6 Rear Right Side Rail 1
7 Front Cover 1
8 Rear Cover 1
9 Foot Rest 1
10 Cushion Assembly 1
12 Tension Cord Assembly 4
13 Support Bushing 4
14 Stop Bushing 4
15 Head Rest 1
16 Foam Pad Tube 2
17 Foam Pad 2
18 Rope 2
19 Hand Strap 2
20 Foam Sleeve 1
21 Washer (M5) 3
22 Pulley Assembly 2
23 Pulley Spa cer 2
24 Plastic Wheel 2
25 Rubber Foot 4
26 Locking Pin 1
27 Stop Plate 2
28 Small Stop Plate 2
29 Stop Pad 4
30 Round Plug (25mm) 2
31 Bolt, Socket Head (M6 x 1 x 20mm) 4
32 Bolt, Socket Head /w hole (M8x1.25x20mm) 1
33 Shaft Bolt, Socket Head (M8-10mmx20mm) 2
34 Bolt, Socket Head (M8 x 1.25 x 20mm) 3
35 Bolt, Round Head (M8 x 1.25 x 25mm) 4
36 Screw , Round Head (M5 x 0.8 x 25mm) 4
37 Screw , Round Head (M6 x 1 x 35mm) 2
38 Screw , Flat Head (M5 x 0.8 x 25mm) 3
39 Screw, Round Head (M3.5 x 11mm) 12
40 Nylock Nut (M6 x 1) 6
41 Nylock Nut (M8 x 1.25) 8
42 Lock Washer (M8) 4
43 Nylock Nut (M5 x 0.8) 3
44 Nut (M8 x 1.25) 4
45 Washer (M6) 6
46 Washer (M8) 16
47 Washer (M10) 4
48 Manual 1
49 Workout Chart 1
50 Instruction Video 1
51 Roller 4
52 Roller Spacer 4
Page 14
14
NOTES
Page 15
IMPORT ANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
IMPORT ANT : We must have your phone number in order to process the order!
FAX/MAIL ORDERING FORM
Plea se do not return the product. For your convenience, Sta mina has a Customer Service Department with
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520
(in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or f ill out the fax sheet
ordering form below and fax it to (417) 889-8064. Our Customer Service Department will be able to assist
you with your problem and the part will be mailed directly to your house.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
CUSTOMER SERVICE
Fax: (417) 889-8064
MAIL
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
ONLINE
CUSTOMER SERVICE
parts@staminaproducts.com
www.staminaproducts.com
Mr./Ms:
Address: Apt. #:
City: State: Zip Code:
Phone #: ( ) Work Phone #: ( )
Date Purchased:
Model #:
Purchased From:
P ART # DESCRIPTION QUANTITY
1 Rear Unit Assembly 1
EXAMPLE:
Loading...