Stamina AeroPilates Performer 296, 55-4296 Owner's Manual

Owner's

Manual

! WARNING !

Exercise can present a he alth
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.

When calling for parts or
service, please specify the
following number.

55-4296

Pat. No. D382,319

Other Patents Applied

and Are Pending

MADE IN CHINA

CAUTION:
We ight on this product should not exceed 300 lbs.

Product May Vary Slightly

From Pictured.

2006, 10

2040 N. Alliance, Springfield, MO 65803

Customer Service Number

1 [phone]

www.staminaproducts.com

This Product is Produced Exclusively by

2006 Stamina Products, Inc.

TABLE OF CONTENTS

2

Conditioning Guidelines 11
Warm-up and Cool-Down 12
Warranty 13
Product Parts Drawing 14
Parts List 15
Notes 17
Fax/Mail Ordering Form 18

Page Page

Safety Instruction s 2
Before You Begin 4
Hardware Identification Chart 5
Assembly Instructions 6
Operational Instructions 9
Storage 10
Mainten ance 10

Before starting any exercise or conditioning program you should consult with your personal
physicia n to see if you require a complete physical exa m. This is e specially i mporta nt if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESUL T IN SERIOUS BODILY INJURY.

SAFETY INSTRUCTIONS

WARNING:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

Read all warnings posted on the

.

We recommend that two people be available for assembly of this product.
Read this Owner's Ma nual a nd f ollow it carefully before using the

. Make sure that it is
properly assembled and tightened before use.
When exercising on this product, do not exercise at an intensity that causes the product itself to
move. This could result in damage to your joints and the product.
Keep children away from the

. Do not allow children to use or play on the .

Keep children and pets away from the

when it is in use.
It is recommended that you place this exercise equipment on the floor mat.
Set up and operate the

on a solid level surface. Do not position the on
loose rugs or uneven surfaces.
Inspect the

for worn or loose components prior to use.

Tighten/replace any loose or worn components prior to using the

.

Consult a physician prior to commencing an exercise program. If, at any time during exercise, you
feel faint, dizzy, or experience pain, stop and consult your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your
limits and train within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the

.

Be careful to maintain your balance while using, mounting, dismounting, or assembling the

, loss of balance may result in a fall and serious bodily injury.

The

should not be used by persons weighing over 300 pounds.

The

should be used by only one person at a time.

The

is for consumer use only. It is not for use in public or semipublic facilities.

WARNING:

To reduce the risk of serious injury, read the following Safety Instructions before
using th

e .

CALL US FIRST

3

THANK YOU FOR PURCHASING THE

To help you get started, we have pre-a ssembled most of your

at the factory with the exception of those parts left

unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

Within a few minutes you will be getting your body into shape and on your

way to achieving a happier and healthier lifestyle.

Should you have any que stions,

please call our Customer Service Department toll-free number,

1 [phone]

Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: [phone]

FAX

CUSTOMER SERVICE

Fax: [phone]

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

[e-mail]

[e-mail]

www.staminaproducts.com

BEFORE YOU BEGIN

Thank you for choosing the . We
take great pride in producing this quality product a nd
hope it will provide many hours of quality exercise
to make you feel better, look better and enjoy life to
its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time

and opportunity to exercise. The
provides a convenient and simple method to begin
your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further , ple ase review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the

.

THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY : Combination Wrench

Socket Wrench

Front Frame

Foam Pad

Headrest

Rope

Pulley Assembly

Front Cover

Hand Strap

Wheels

Locking Knob

Cardio
Rebounder

Rear Cover

Tension Cords

Securing Knob

Rear Frame

4

Hand Grip

Pulley Riser

Rope

Hand Strap

Carriage

Cushion

Red Power Cord

Hand Grip

Floor Mat

Although Sta min a con structs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you any questions or proble ms with the parts

included with your

, please do not
return the product. Contact us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to a ssist you from 7:30 A.M.
to 5:00 P .M. (Central T ime) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central T i me) on Friday.
If you would like to contact us on-line, go to our
website at www .stamin aproducts.com a nd a ccess the
Customer Service section.
Be sure to have the name and model number of
the product available when you contact us.

Magic Circle

Pulley Riser

Footrest

5

Part No. and Description Qty

53 Washer (M8) 6

49 Nylon Nut (M8 x 1.25) 2

44 Screw, Round He ad (M5 x 0.8 x 25mm) 4
61 Bolt, Round Head (M8 x 1.25 x 35mm) 2

62 Arc Washer (M8) 2

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the corre ct diameter. Use the small scale to check the
length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat hea ds is

measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materi als from your area a nd pla ce them ba ck into the box. Do not dispose of the pa cking materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 [phone] or e-mail us at:

[e-mail]

6

STEP 1

Remove your from its packaging placing the product on its side, with the LOCKING PIN(33)
side upward. Remove the LOCKING PIN(33) and unfold the MAIN FRAME ASSEMBLY separating the
half that ha s the attached LOCKING PIN(33). When completed, the frame should be separated a pproxi mately
3 feet at the end.

STEP 2

Attach the four RUBBER FEET(32) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND HEAD
SCREWS(M5x0.8x25mm)(44). Atta ch the WHEELS(31) onto the FRONT FRAME(1) with WASHERS(M8)
(53) and NYLOCK NUTS(M8)(49).

STEP 3

Unf old your to a flat position by moving the FRONT FRAME(1) away from the platform end
of the product in a clockwise position until fully extended.