Stabila REC 150 Operating Instructions Manual
Receiver REC 150
Operating instructions
en
Operating instructions
The STABILA REC 150 is a simple-to-use receiver for the rapid capture of rotating
lasers. The REC 150 receiver can receive laser beams from rotation lasers,
even when these are invisible to the naked eye.
If you still have questions after reading through the operating instructions,
you can obtain advice by telephone: +49 63 46 / 3 09-0
Main components
50 mm
2“
5
7
1
6
4
2
3
8
3
6
50 mm
2“
1. ON/OFF / Volume button
2.
Accuracy button
3.
LCD
4. Laser receiver glass 50 mm / 2“
5.
Beeper
6.
“In line” marks
7. Battery
compartment cover
8.
Guide groove for retaining clip
en
Getting started
Press the ON/OFF/VOLUME button (1). An audio signal and a short flash from the
display will confirm, that the instrument is switched on. Press the ON/OFF/VOLUME
button (1) quickly once (2sec) to switch the instrument off.
If the instrument is not used, it will automatically switch itself off after 30 minutes.
Height difference display
5
display steps indicate the divergence from the centre of the laser line.
The central bar indicates the “in line” position of the REC 150.
Rapid beeping note
= too high / back
Continuous
tone = “in line”
Slow beeping note =
too low / forward
1. 2. 3.
OK
1
1x
REC 150
REC 150
en
Loading...