Stabila HL-100 User Manual

Operating instructions

Hole Locator HL-100

USA

Should you have additionalquestions concerning this product’ s operation
and use or care and maintance, please callour Customer Service number:

1.800.869.7460 U.S. and Canada

Operating manual:

2

1. Main applications:

USA

The HL 100 hole locator is an easy-to-use point laser for aligning a series of
holes in a straight line. The laser beam serves as a precise horizontal (level),
incline /decline (slope) or vertical (plumb) reference point with a range up to
25m /75 ft.

The HL 100 is specially designed to be installed and self-center itselfinto the
first drilled hole. Once the laser beam hasbeen aligned, the projected laser
dot serves to mark the drilling position on the next joist / stud.

Horizontalmode (level / slope)

89/16”

51/16”

1

5/8”

311/16”

31/4”

411/16”

2

1

9

5

11

3

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)

(9)
(10)
(11)
(12)
(13)

Laser beam emission aperture
ON/OFF switch

Horizontal setting dial (left/right)
Small locking nut for holes from over 7/8” to 3” in diameter (20mm-75mm)

Adapter plate for holes over 3” (75 mm)
Vial for horizontal leveling
Bulls eye vial for ver tical leveling

Roll cage stand for vertical operation

Battery compartment cover

Verticalsetting dial (up/down)

Large locking nutfor holes from 3 1/4” to 4 3/4”in diameter (80mm-120mm)

12

10

8

3

4

13

threaded tube

crosshaires

2. Main components

7

6

5