STiH273
HD cable/terrestrial STB processor with integrated demodulators and low power standby controller
Data brief
Features
■ST40 applications CPU with 256 KB L2 cache
■16-bit LMI supporting DDR2/DDR3
■Decoding of H264, MPEG2, VC-1 and AVS HD video streams
■3DTV decoding and display compatible with HDMI 1.4a
■Extensive connectivity (2 × USB 2.0 ports; Ethernet MII/RMII/TMII port; SD/MMC card port; eSATA port; PCI-e)
■Secure boot from SLC NAND Flash or Serial NOR Flash; eMMC booting option
■Low-power process and architecture
■Integrated low power standby controller
■High-quality video resizing and de-interlacing
■Integrated Ethernet PHY
■Targets two layer PCBs for cost-effective zapper STB applications
■Integrates dual mode DVB-T/DVB-C demodulation and FEC
Description
The STiH273 uses the latest process technology to provide a cost-effective, feature rich, highly integrated SoC for set-top boxes (STBs). It is targeted at the advanced decoding STB market across cable and terrestrial networks, and is suitable for operator markets (with advanced security) and retail markets worldwide.
The STiH273 provides a solution for operators and manufacturers to specify a range of costeffective, high performance STBs, including basic zappers, interactive STBs, and DVR STBs with content delivery possible using broadcast or broadband networks or both (hybrid STBs).
The STiH273 integrates a high performance dual mode, cable/terrestrial receiver, supporting DVB-C or DVB-T reception, channel demodulation, and forward error correction (FEC). The DVB-C receiver is compliant with ITU-T J.83 Annex A/C, and the DVB-T receiver is compliant with ETSI EN-300744 v1.5.1, Nordig Unified (v2.2.1) and DTG 7.2.
|
|
Resets |
Analog out |
|
|
|
||
|
|
Clocks |
PCM I/O |
STB peripherals I/O |
|
|||
JTAG |
Modes |
S/PDIF out |
external interrupts |
|
||||
|
|
|
|
|
|
|
System |
|
|
|
|
|
|
|
|
|
|
CPU/FPU |
Clock Gen |
Audio I/O |
Peripherals |
|
|
|
System |
|
|
interfaces |
|
|
|
SLC NAND Flash |
|
|
|
|
services |
|
|
|
|
|
|
|
|
|
|
|
Dual FDMA |
|
|
|
|
|
|
Serial Flash |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
L2 cache |
Audio decoder |
|
DDR3 LMI |
|
|
|
CI-Plus cards |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
DDR2/DDR3 |
|||
|
|
|
|
|
STBus |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
Transport |
Video decoder |
Display |
Video I/O |
|
|
|
Dual USB |
||||
|
|
|
|||||||||
Security |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low power |
|
|
|
|
|
|
eSATA/PCI-e |
|
|
|
|
standby |
|
|
|
|
|
|
|
|
|
|
|
controller |
|
|
|
|
|
|
Ethernet |
|
|
|
|
DVB-C |
|
|
Connectivity |
|
|
|
||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
DVB-T |
|
|
|
|
|
|
SD-MMC/SDIO |
|
|
|
demodulator |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transport streams |
Transport IF in |
|
Analog video |
|
|
|
|
||||
stream |
|
|
|
|
|
||||||
Parallel/serial in/out |
|
HDMI |
|
|
|
|
July 2012 Doc ID 022872 Rev 2 1/4
For further information contact your local STMicroelectronics sales office. |
www.st.com |
Introduction |
STiH273 |
|
|
The STiH273 offers current users of ST’s growing family of advanced decoding ICs enhancements in performance and features, enabling operators to offer consumers new multimedia-rich services and viewing experiences, including new 3DTV features. Faster DDR3 memory is also supported, and the applications CPU benefits from an L2 cache. The STiH273 keeps pace with the latest advanced security requirements of the main CA vendors, and an integrated standby controller enables the STiH273 to target stringent low power regulations.
Features |
|
Benefits |
|
|
|
Integrated dual mode DVB-C/DVB-T demodulation/FEC.
ST40 applications CPU, with 32KI and 32KD L1 caches and 256K L2 cache.
Integrated low power standby controller within its own power island.
Latest generation of ST's Delta video decoder coupled with a High Quality Video Display Pipeline (HQVDP).
Highly integrated STB solution, reducing component count and manufacturing BOM.
High performance processing for applications and middleware.
Secure hibernation to, and fast resume from, very low power passive standby mode, targeting STB standby power < 0.5 W.
Decoding of advanced high definition standards (MPEG2, H264, VC-1, AVS) plus the performance and flexibility for web-based content decoding such as Flash®, DivX™, MJPEG and Real®, without impacting applications CPU performance.
Dual USB 2.0 hosts, eSATA, Ethernet MAC with MII/RMII/TMII interfaces, PCI-e, SD-MMC/SDIO interface.
Extensive high speed connectivity for the widest range of STB peripherals, such as Flash drives, external HDDs, Ethernet, home network controllers (such as MoCA®, Wi-Fi), DOCSIS® modem and memory cards.
NOCS3.0, NSK2.0 and DVB-CSA3 ready.
Ball compatible with other STiH2xx family variants.
Fully compliant with the latest advanced security requirements of CA vendors.
Single platform versatility across all networks (satellite, cable, terrestrial, IP).
2/4 |
Doc ID 022872 Rev 2 |