SSAC TDUS Digi-Set Catalog Page
Single Shot (Pulse Former)Single Shot (Pulse Former)
Single Shot (Pulse Former)
Single Shot (Pulse Former)Single Shot (Pulse Former)
TDUS Digi-Set
Timing Module
DescriptionDescription
Description
DescriptionDescription
The TDUS Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240 V AC
and 12 to 24 V DC are available in three ranges. The TDUS Series offers DIP switch selectable time delays
ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1 A rated output, ability to operate on multiple
voltages, and wide range of switch selectable time delays make the TDUS Series an excellent choice for
process control systems and OEM equipment.
Switch Selectable Time
Setting
0.1 s ... 102.3 m in 3 Ranges
+/- 0.5% Repeat Accuracy
+/- 2% Setting Accuracy
1 A Solid State Output
Encapsulated
Wide Voltage Ranges
Approvals:
OperationOperation
Operation
OperationOperation
Input voltage must be applied before and during
timing. Upon momentary or maintained closure of the
initiate switch (leading edge triggered), the output
energizes for a measured interval of time. At the end
of the delay, the output de-energizes. Opening or
reclosing the initiate switch during timing has no affect
on the time delay. The output will ener gize if the initiate
switch is closed when input voltage is applied.
Reset: Reset:
Reset:
Reset occurs when the time delay is complete
Reset: Reset:
and the initiate switch is opened. Loss of input voltage
resets the time delay and output.
ConnectionConnection
Connection
ConnectionConnection
FunctionFunction
Function
FunctionFunction
Single Shot
V = Voltage L = Load S1 = Initiate Switch
TD = Time Delay R = Reset
AccessoriesAccessories
Accessories
AccessoriesAccessories
Female quick connect
P/Ns:
P1015-13P1015-13
P1015-13
(AWG 10/12)
P1015-13P1015-13
P1015-64 P1015-64
P1015-64
(AWG 14/16)
P1015-64 P1015-64
P1015-14 P1015-14
P1015-14
(AWG 18/22)
P1015-14 P1015-14
Quick connect to
screw adaptor
P1015-18 P1015-18
P/N:
P1015-18
P1015-18 P1015-18
DIN rail P/Ns:
017322005 017322005
017322005 (Steel)
017322005 017322005
C103PM C103PM
C103PM (Al)
C103PM C103PM
←
→
DIN rail adaptor
P1023-20 P1023-20
P/N:
P1023-20
P1023-20 P1023-20
See accessory pages for
specifications.
Dashed lines are internal connections.
UTL = Optional Untimed Load S1 = Initiate Switch
L = Timed Load
OrOr
dering Tdering T
Or
dering T
OrOr
dering Tdering T
Input VInput V
Input V
Input VInput V
24 ... 120 V AC
100 ... 240 V AC
12 ... 24 V DC
24 ... 120 V AC
100 ... 240 V AC
12 ... 24 V DC
24 ... 120 V AC
100 ... 240 V AC
12 ... 24 V DC
ableable
able
ableable
oltage Rangeoltage Range
oltage Range
oltage Rangeoltage Range
Time RangeTime Range
Time Range
Time RangeTime Range
0.1 ... 102.3 s
0.1 ... 102.3 s
0.1 ... 102.3 s
1 ... 1023 s
1 ... 1023 s
1 ... 1023 s
0.1... 102.3 m
0.1... 102.3 m
0.1... 102.3 m
Part NumberPart Number
Part Number
Part NumberPart Number
TDUSL3000A
TDUSL3001A
TDUSL3002A
TDUS3000A
TDUS3001A
TDUS3002A
TDUSH3000A
TDUSH3001A
TDUSH3002A
Low Voltage Products & Systems5.110
TDUSGen 07.02.04
Single Shot (Pulse Former)Single Shot (Pulse Former)
Single Shot (Pulse Former)
Single Shot (Pulse Former)Single Shot (Pulse Former)
TDUS Digi-Set
Timing Module
Technical Data Technical Data
Technical Data
Technical Data Technical Data
Time DelayTime Delay
Time Delay
Time DelayTime Delay
Range* 0.1 ... 102.3 s in 0.1 s increments
Repeat Accuracy +/-0.5% or 20 ms, whichever is greater
Setting Accuracy ≤ +/-2% or 20 ms, whichever is greater
Reset Time ≤ 150 ms
Initiate Time ≤ 20 ms
Time Delay vs. Temperature & Voltage ≤ +/-5%
InputInput
Input
InputInput
Voltage/Tolerance 24 ... 240 V AC, 12 ... 24 V DC /+/-20%
Line Frequency 50 ... 60 Hz
Power Consumption AC ≤ 2 VA; DC ≤ 1 W
DC Ripple ≤ 10%
OutputOutput
Output
OutputOutput
Type Solid state
Form Normally Open, closed during timing
Rating 1 A steady state, 10 A inrush at 60°C
Voltage Drop AC ≅ 2.5 V at 1 A; DC ≅ 1 V at 1 A
Off State Leakage Current AC ≅ 5 mA at 230 V AC; DC ≅ 1 mA
ProtectionProtection
Protection
ProtectionProtection
Circuitry Encapsulated
Dielectric Breakdown ≥ 2000 V RMS terminals to mounting surface
Insulation Resistance ≥ 100 MΩ
Polarity DC units are reverse polarity protected
MechanicalMechanical
Mechanical
MechanicalMechanical
Mounting Surface mount with one #10 (M5 x 0.8) screw
Package 2 x 2 x 1.21 in (50.8 x 50.8 x 30.7 mm)
Termination 0.25 in. (6.35 mm) male quick connect terminals
EnvironmentalEnvironmental
Environmental
EnvironmentalEnvironmental
Operating Temperature -40°C ... +60°C
Storage Temperature -40°C ... +85°C
Humidity 95% relative, non-condensing
Weight ≅ 2.4 oz (68 g)
1 ... 1023 s in 1 s increments
0.1 ... 102.3 m in 0.1 m increments
*For CE approved applications,
power must be removed from
the unit when a switch position
is changed.
Mechanical View Mechanical View
Mechanical View
Mechanical View Mechanical View
Inches (Millimeters)
Add the value of switches in the ON
position for the total time delay.
TDUSGen 07.02.04
Low Voltage Products & Systems 5.111
Loading...