USER MANUAL
v.1.0
introduction
FLEX G-36SPYPOINT
FLEX G-36 PRESENTATION
The FLEX G-36 is one many SPYPOINT trail cameras. While SPYPOINT has
been a cellular trail camera leader for some time, the FLEX G-36 is a major
step forward in customer-friendly and innovative design, optimized antenna,
straightforward interface, TEST and FORMAT buttons, and automatic carrier
connection technology.
The FLEX G-36 is a cellular trail camera that works with the SPYPOINT mobile app to:
• Send photos and videos to your smartphone or tablet.
• Check camera status.
• Manage camera settings and preferences.
The FLEX G-36 oers features and performance that are unheard of at its price
point. The commitment to user value carries through to the FLEX G-36, even
with all the new and innovative features that have been included. Hunters are
loving the performance and exibility the latest camera from SPYPOINT delivers.
THANK YOU FOR CHOOSING A SPYPOINT PRODUCT
This User Manual will introduce you to the features of your new FLEX G-36 and
will guide you through the acquisition of its functionalities so that you can use
it to its full potential.
Our priority is to oer outstanding service to our customers. If you need
technical support for your camera, here is how to contact us:
Contact our chat service directly on the SPYPOINT site (in the lower righthand corner of the Support section, by clicking on the “Start Chat” window,
www.spypoint.com).
• Monday to Friday — 8:30 a.m. to 8:00 p.m.
• Saturday-Sunday — 8:30 a.m. to 5:30 p.m.
Go to www.spypoint.com/en/support for more information
about our devices.
ABOUT US
SPYPOINT’s mission is to oer you products that are easy to use, innovative,
aordable, and of exceptional quality. Our products are mainly used in the
hunting eld and residential and commercial safety elds. They are distributed
and appreciated on all continents and are continuously growing. Prosperous
and respected, SPYPOINT is a company that is constantly developing new
technologies and that remains attentive to its customer’s needs to oer
cutting-edge products with concrete solutions to improve hunting and
outdoor activities.
JOIN THE SPYPOINT COMMUNITY
www.facebook.com/SPYPOINT
www.twitter.com/SPYPOINTcamera
www.youtube.com/SPYPOINTtrailcam
www.instagram.com/spypointcamera
www.tiktok.com/@spypointcamera
2
Table Of Content
FLEX G-36SPYPOINT
Components ..........................................................................................4
Features ...................................................................................................6
Power Supply ........................................................................................7
Memory Card ........................................................................................8
Preparation ......................................................................................... 10
Activation ............................................................................................ 11
Installation .......................................................................................... 12
Starting Your Camera ..................................................................... 13
Conguration ..................................................................................... 14
Verication ..........................................................................................16
Tool – Accessories – Options ....................................................... 18
Transferring Files to a Computer .............................................. 19
Oered Accessories ........................................................................ 20
Troubleshooting ............................................................................... 21
Warranty ............................................................................................... 22
Regulation ........................................................................................... 23
Disposal & frequency ..................................................................... 24
3
Components
FLEX G-36SPYPOINT
Microphone
q
IR LED
Light sensor
Delay light
Photo lens
Detection lens
Battery door
microSD card slot
Micro SIM card slots
Battery tray
Battery level
Signal level
STATUS light
FORMAT button
TEST button
OFF/ON switch
Antenna
12 V jack
Cable lock hole
Locking latch
Slots for installation strap
Screw-thread for standard
¼"-20 tripod mount
4
Components
FLEX G-36SPYPOINT
MICROPHONE
Records sound in video mode.
IR LED
4 powerful LEDs that illuminate at night for clear
black and white photos and videos.
LIGHT SENSOR
Detects the ambient lighting conditions for taking photos and videos:
in colors during the day, black and white at night.
DELAY LIGHT
During installation, once the signal is found, this light ashes for 30
seconds to allow the user to walk away without being captured.
PHOTO LENS
Image sensor.
DETECTION LENS
Enlarges the detection area of the camera’s motion sensor.
BATTERY DOOR
Provides access to the battery compartment,
microSD card, STATUS light, and OFF/ON switch.
microSD CARD SLOT
Space to insert the microSD card (not included)
needed to save photos and videos.
MICRO SIM CARD SLOTS
Space to insert two SIM cards. It is necessary to activate cellular
The SIM cards, pre-installed and preactivated, are included with the camera.
It is important to use a SPYPOINT SIM cards (supplied by SPYPOINT),
otherwise the cellular functions of the camera will be inoperative.
functions.
SIGNAL LEVEL
During startup, the camera will illuminate the number of lights
corresponding with the signal level. 5 bars being excellent and 1 bar
being poor.
STATUS LIGHT
During installation, it ashes to indicate to the user the strength of the
cellular signal. During regular operation, it indicates that the camera is
recording or transferring les.
FORMAT BUTTON
This button will allow you to format the microSD card during the start
up of the device.
TEST BUTTON
This button will allow you to send a photo to your app (if you have a
transmission plan with remaining photos)
OFF/ON SWITCH
Allows the user to turn the camera OFF/ON.
ANTENNA
Captures the cellular signal.
12 V JACK
Allows you to insert a power cord connected
to an external 12 V source.
CABLE LOCK HOLE
Allows you to install a #CLM-6FT padlock cable
to secure the unit (sold separately).
LOCKING LATCH
Allows you to lock, unlock and open the door.
BATTERY TRAY
Removable device in which the 8 alkaline or lithium AA nonrechargeable batteries are inserted (not included with the camera).
BATTERY LEVEL
During startup, the camera will illuminate the number of lights
corresponding with the current battery level of the camera.
SLOTS FOR INSTALLATION STRAP
Allows the camera to be installed using the included installation strap.
SCREWTHREAD FOR STANDARD ¼"20 TRIPOD MOUNT
Allows you to attach a standard tripod from ¼"-20.
5
Features
FLEX G-36SPYPOINT
CELLULAR TRANSMISSION
Network LTE Multi-carrier auto connectivity
Transmission of your photos and videos to your
Transmission plan
Camera conguration
SPYPOINT application by cellular network.
Visit www.spypoint.com/plans to choose
a plan that suits you.
Fully congurable remotely with the free
SPYPOINT app.
PHOTO RECORDING
Photo resolution 36 MP
Photo le format JPG
Time-lapse mode
Multi-shot mode Up to 3 photos per detection
Info bar
Capture mode Colors by day, black and white by night
Time-Lapse and Time-lapse+
(Time-lapse with motion detection enabled)
Date, time, temperature (°C/°F), moon
phase, SPYPOINT logo, and camera model
VIDEO RECORDING
Video resolution 1 920 X 1 080 (FHD 1080p)
Video le format MP4
Video length 15 seconds
Capture mode Colors by day, black and white by night
AUDIO RECORDING
Audio mode Yes
MEMORY
External memory microSD card up to 512 GB (not included)
VIEWING
POWER SOURCES
Alkaline or lithium AA
non-rechargeable batteries
Lithium battery pack
External 12 V battery
Solar panel lithium battery
8 x AA (not included)
Lithium battery pack #LIT-22
(not included)
12 V battery
Optional accessories available at SPYPOINT:
#KIT6V-12V, #KIT-12V, #BATT-12V
Solar panel lithium battery #SPLB-22
(not included)
DETECTION SYSTEM
Movement detector Infrared
Detection angle 50°
Detection range Up to 30 meters/100 feet
Trigger speed 0.3 seconds
Delay between each detection Adjustable from Instant to 30 minutes
ILLUMINATION OPTIONS
LED 4 powerful LEDs
Night light range Up to 30 meters/100 feet
Exposure
Automatic adjustment of the infrared
illumination
PHYSICAL DIMENSIONS
10,67 cm (H) x 13 cm (W ) x 7.88 cm (D)
4.2’’ (H) x 5.14’’ (W) x 3.1’’ (D)
RECOMMENDATIONS
Operating temperature -30 °C to 50 °C (-22 °F to 131 °F)
Storage temperature -40 °C to 60 °C (-40 °F to 140 °F)
On the SPYPOINT app or on the website www.spypoint.com/en/manage
6
Power Supply
FLEX G-36SPYPOINT
CHOOSING A POWER SOURCE
4 options are available to you:
• Alkaline or lithium AA batteries
• Rechargeable battery 12 V (#KIT-12V sold separately)
• Rechargeable battery pack 3.7 V (#LIT-10 sold separately)
• Solar panel lithium battery 12 V (#SPLB-22 sold separately)
NOTE
We suggest using a SPYPOINT #LIT-22 rechargeable lithium battery pack with
your camera. It oers a longer battery life than AA batteries, and saves money
over the life of the camera.
FOR BEST RESULTS AND NO LEAKAGE
• Use only new alkaline or lithium batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA batteries
(their lower voltage will generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
SPLB-22 – SOLAR PANEL
LITHIUM BATTERY COMBO UNIT
• Combines solar panel and lithium
battery into one unit to reduce wires
and setup time.
• Plugs directly into camera to provide
extensive, ongoing battery life for
your camera so you can avoid visits.
• Additional jacks and plugs allows for
device exibility.
MANAGING VARIOUS CAMERA POWER SUPPLY
If you choose to plug an external 12 V battery (#KIT-12V, sold separately)
into your camera, it becomes your camera’s new primary power source.
The AA batteries will only be used once the 12 V battery is depleted.
You can check the battery level on your device or in the mobile application:
• In the application: on the home page, you will see the battery charge level
for each of your devices. You can access more details on the status of your
battery by going to the STATUS page. When the battery logo turns red, we
suggest that you change the batteries before it is completely drained.
• Once the device is powered on. There are four green lights within the battery
icon indicating the battery level.
• Unlock the latch and open the FLEX G-36 door.
• Place the battery holder back into the battery
compartment with arrows facing up (See Photo)
• Insert the AA batteries into the battery holder
following polarity (+) and (-) indications.
• Place the battery holder back into the battery
compartment.
7
Memory Card
FLEX G-36SPYPOINT
INSTALLING A MEMORY CARD (NOT INCLUDED)
The use of a memory card is necessary for the operation of the camera. It is used to save photos, videos and
other camera status les. Note that photos and videos in their original format are kept on the memory card.
The les sent to your application are lighter versions. You can retrieve your photos and videos at any time by
removing the card from the camera and transferring the contents to another device (e.g.: computer).
Your camera requires a microSD memory card, with a maximum capacity of 512 GB, sold separately. Here is
a table showing the approximate quantity of photos or videos that can be recorded on the card, according
to dierent memory card capacities.
MEMORY
PHOTOS (36 MP)
VIDEOS (1080P)
4 GB 16 GB 32 GB 128 GB 512 GB
1 700 7 000 13 900 55 700 222 900
627 2 508 5 016 20 064 80 256
INSERTING YOUR MEMORY CARD
• Ensure the camera is turned OFF.
• Find the microSD card slot. It is located at the bottom
of the camera (see photo).
• Insert a microSD card (up to 512GB) in the microSD
card slot with the metal contacts facing up.
• The card is inserted correctly when a click is heard.
NOTE
The FLEX G-36 is equipped with continuous mode.
This means that when the memory card is full, the
camera continues to save your photos and videos
by erasing the rst recorded les.
8
Memory Card
REMOVING YOUR MEMORY CARD
• Before removing a memory card, always turn your camera OFF
to prevent les on the card from being deleted or damaged.
• To remove the card, push it lightly into the camera until you hear a click.
Then take it out of the device.
FORMATTING THE MEMORY CARD
During the start up of the camera, you can use the FORMAT button on the
device to quick format the microSD card. This is required if you want to be able
to take photos and videos while transmitting.
FLEX G-36SPYPOINT
1. Turn ON the camera.
2. Press and hold the FORMAT button for 5 seconds.
3. The microSD light will blink green while the card is formatting.
4. Once complete, the microSD light will become solid green.
9
Preparation
FLEX G-36SPYPOINT
SCREW IN ANTENNA
The antenna doesn't come installed. Please insert as shown in the photo.
ACTIVATING YOUR CAMERA
Before you can use your camera, you must activate it.
FINDING THE ACTIVATION CODE
The activation code is located inside the FLEX G-36’s battery compartment.
To do so, you will need the activation code.
Activation
code
10
Activation
SPYPOINT APP - NEW USERS
On your mobile device or a computer, use the web browser and navigate to www.spypoint.com, select
“LOGIN” in the top navigation menu. On the displayed “SPYPOINT” page, select “CREATE AN ACCOUNT“,
ll out the required elds, then log in. Once your account is created you can either continue to use the web
version of the application or you can switch to the mobile application.
If you choose to use the SPYPOINT app to activate your device, follow these steps:
1. On Google PlayTM or the App StoreTM, search for “SPYPOINT”.
2. Download and install the app on your smartphone or tablet.
3. Start the app. Select “LOGIN”. Enter your account information and select “LOGIN”.
4. Selec t the “CAMERAS” tab at the bottom of the screen and press the orange + button.
5. In the list, select “FLEX G-36” then follow the steps to scan your data matix code.
6. When complete, you will see the camera in the camera list.
FLEX G-36SPYPOINT
If you choose to use our SPYPOINT website to activate your device, follow these steps:
1. On the www.spypoint.com website, select “LOGIN” in the top navigation menu. On the displayed
“SPYPOINT” page, login using your account information. Then press the “LOGIN” button.
2. Select the + sign on the far right of the page; in the list, select “FLEX G-36” then follow the steps.
3. When complete, you will see the device in your camera list.
CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA
Go to www.spypoint.com/en/spypoint-experience/plans to read the latest oers
and choose the plan that suits you.
11
Installation
INSTALLING YOUR CAMERA
1. To install the camera, loop the installation strap through the intended slots.
2. Choose a solid tree that does not move in the wind, as movement will cause
false detections.
3. Make sure the area immediately in front of your camera is free of branches
or twigs that could be blown away by the wind.
4. The camera should be at the same height of the animal’s mid-body.
5. The targeted animal should be at 25 feet (7.5 meters) away from the camera.
6. To produce brighter photos and videos at night, there should be items
reecting the camera's ash in the background.
STARTING YOUR CAMERA
IMPORTANT VERIFICATIONS BEFORE STARTING YOUR CAMERA:
25 feet
(7.5 meters)
M The antenna is installed (antenna support removed).
M The 8 AA batteries or LIT-22 are inserted in the camera’s battery compartment.
M The microSD card is formatted and inserted in the camera.
M The camera is activated.
M The camera is securely installed.
1. Turn ON the camera.
2. The green STATUS light will ash, the battery level will be displayed.
3. The signal lights will ash together until signal is found. Once signal
is found number of bars will correspond to the signal strength.
4. The microSD light will be ON.
5. The delay light will blink for 10 seconds,
and the STATUS light will turn solid green.
6. All lights will turn OFF and the camera will go into standby
mode – awaiting a trigger.
12
Starting Your Camera
OPERATIONAL VALIDATION TEST
You can use the following test to make sure everything works as it should:
TEST BUTTON
The TEST button forces the camera to take a single photo and transmits it. It
will NOT work if the camera is already busy with another task. (Synchronizing
with the server, recording a photo/video or running through the start up
sequence of the camera.) This button will only work if the camera is on an
active transmission plan with photos remaining.
1. After the camera has started, and passed through the startup light
sequence, the TEST button can be used. Ensure all lights are OFF before
proceeding.
2. Press the TEST button for at least 1 second.
3. Battery level will be displayed.
4. Signal lights will blink together every second until the camera receives the
signal strength. Then it will display the number of lights corresponding to
the signal strength.
5. All Lights will turn OFF.
FLEX G-36SPYPOINT
13
Configuration
MANAGE DEVICE
Use the SPYPOINT app to congure your camera.
FLEX G-36SPYPOINT
EDIT DEVICE NAME
All possible values
RESTORE FACTORY SETTINGS
Restore
IMAGE CAPTURE
CAPTURE MODE
Photo; video; time-lapse;
time-lapse+
MOTION DELAY
Instant; 10 seconds; 20 seconds;
30 seconds; 40 seconds; 50 seconds;
1 minute; 3 minutes; 5 minutes;
10 minutes; 15 minutes;
20 minutes; 30 minutes; 1 hour
Allows you to name the camera for easy identication. This function is very useful for users with more than one camera.
Allows you to reset the camera to its original state.
• Photo: The camera will capture photos based on the motion detection.
• Video: The camera will capture video clips based on motion detection.
• Time-lapse: The camera will capture photos based on a schedule set by the user.
• Time-lapse+: The camera will capture photos based on a schedule set by the
user and also capture photos based on the motion detection.
Allows you to choose the period of time to wait before the camera detects again and records the next photo/video.
A longer delay minimizes the number of photos and videos taken and therefore maximizes battery life. A shorter delay
maximizes surveillance in the area but consumes more power. Shorter delays are recommended when the camera
is used for security purposes.
SD PHOTO RESOLUTION
High/optimal
MULTI-SHOT
1; 2; 3
SENSITIVITY
Low; normal; high
Allows you to determine the quality of the photos saved on your microSD card.
Optimal quality: 36 MP or high quality: 2 MP.
Allows you to take 2 or 3 consecutive photos at each detection, with a 5-second delay between each photo.
Allows you to choose the detection sensitivity of the device. A higher sensitivity allows you to detect movement
in front of the camera more eectively, so the camera will take more pictures.
14
Configuration
CELLULAR
FLEX G-36SPYPOINT
Allows you to choose the time when the camera makes its rst transfer of the day, each day.
DAILY SYNC TIME
All possible combinations
SYNC FREQUENCY
1; 2; 4; 6; 12; each detection
CELLULAR
Activated/not activated
TAKE A PHOTO/VIDEO AT EACH SYNC
Activated/not activated
CAMERA COMMANDS
UPDATE FIRMWARE
GENERAL
Note: The camera transfers are congured by default with 6 times per day, determined from the time you activated
your camera. For example, if your camera was activated at 1:42 p.m., this will be the default rst transfer time.
The next transfer will be at 5:42 p.m.
Allows you to choose the number of transfers the device performs each day.
Allows you to activate or deactivate the cellular mode.
Note that this setting will only take eect the next time the camera makes a transfer.
During the next transfer, the camera will automatically take a photo or a video and communicate it to your application.
Allows you to request a rmware update to your device.
DATE FORMAT
MM/DD/YYYY or DD/MM/YYYY
TIME FORMAT
12 h or 24 h
BATTERY TYPE
Automatic or AA_LIT
Allows you to choose the date format displayed.
Allows you to choose the time format displayed.
Allows the user to select the battery type installed in the camera.
15
Verification
FLEX G-36SPYPOINT
VERIFYING CAMERA STATUS
Dierent tools are available to help you check the status of your
FLEX G-36 and to inform you of any problems that may occur
during its operation. In this section, we will see 3 tools:
NOTIFICATIONS
The camera was designed to send notications to your SPYPOINT app.
This is to help you stay informed of the status of your camera.
You will receive a notication on your smartphone at the next transfer
when a photo/video is received or important notication is sent:
• You forget to insert a microSD card in your camera.
• The inserted microSD card is not compatible with your camera.
• The battery percentage is too low.
APPLICATION STATUS PAGE
Here are the dierent indicators of the FLEX G-36 status you have access to.
They are accessible on your app or on the SPYPOINT website. What appears in
this page is a reection of the camera at the last communication.
SIGNAL
Strength of the cellular signal
BATTERY
Battery percentage remaining
MEMORY CARD
Used space
LAST COMMUNICATION
The date and time of the last device transfer
TEMPERATURE
POSITION
GPS
MODEL
1 - 5 bars
0 - 100%
(AA/LIT-22/12 V)
0 - 100%
Date and time
°C or °F
GPS coordinates
FLEX G-36
VERSION
Displays the rmware version
LAST INSTALLATION
Last time your camera was turned ON
SIM
Number on your SIM card
ACTIVATION CODE
VX.XX.XX
Date and time
89……
XXXX-XXX-XXXX
16
Verification
STATUS LIGHT EXPLAINED
STATUS LED COLOR PATTERN INDICATION
FLEX G-36SPYPOINT
Green Solid
Blue Solid When photo or video is getting transmitted
Blue
Orange
Red
Blinking each second
till the reset is complete
Blinking each second
for 30 secondes
Solid
(does not go OFF)
When device gets triggered or
is taking a photo or video
Factory reset
Firmware update
No signal detected
Red
Slow blinking
(every 2 seconds)
SIM issue/Critical hardware failure
17
Tool – Accessories – Options
FLEX G-36SPYPOINT
SPYPOINT MOBILE APP
The key to a successful hunt is information and
that’s what the SPYPOINT app is all about. View
and sort all your photos and videos from the eld,
check hunting conditions, update camera settings,
manage stand locations on your property, and
more, right from your mobile device. It’s the
mobile scouting solution you need to go into the
woods condently.
From the app, you can:
• Manage camera statuses, settings and plans
• View and manage photos and videos
• Sort photos with advanced AI species lters
• Request FULL-HD photos and videos
• Maintain custom maps and markers
• Monitor weather conditions
To learn more visit www.spypoint.com/app
PHOTO TRANSMISSION PLANS
SPYPOINT makes choosing a photo transmission
plan as easy as possible with straightforward photo
count thresholds and the option to go month-tomonth to maximize exibility, or annually to get the
most savings. SPYPOINT even oers a free plan,
sending 100 photos every month at no charge.
To learn more visit www.spypoint.com/plans
SPYPOINT WEB APP
As well as with the SPYPOINT mobile app, you can
manage your device and photos/videos using the
web app.
Log in at www.webapp.spypoint.com to manage
cameras and view photos and videos online.
18
Transferring Files to a Computer
FLEX G-36SPYPOINT
TRANSFERRING FILES TO A COMPUTER
• Turn the camera OFF.
• Remove the microSD card from the camera.
• Insert the microSD card in the microSD computer slot,
or use a USB adapter for microSD cards.
• The computer will recognize the microSD card. There may be two
dierent disks recognized, this is normal after use in the FLEX G-36.
• If the computer doesn't detect the microSD card, this means
the memory card is corrupt and needs to be replaced.
ON A PC
On your desktop, click on “My Computer” or “This PC”.
Locate your device under “Removable Disk” and click to access it. Then, click
on “DCIM” and “100DSCIM” to nd all saved photos and videos. If you do
not see the photos or videos in the folder you checked, try again in the other
“Removable Disk” folder.
Select the les you want to copy. With some Windows versions, the simplest
way is to select them by clicking on the “Home” tab and choosing “Select all”
on the right side. With some Windows versions, you can press on “Ctrl” and “A”
or click on the “Edit” menu and choose “Select all”.
Click on the “Copy” icon on the left of the ribbon (or hold the “Ctrl” and “C” keys).
Access the folder where you want to save your photos and videos or create
a new folder by clicking on the “New folder” button. (You can also click on
“Ctrl”, “ Shift”, and “N” to create a new folder, or right-click in a blank space in
the “Pictures” folder and choose “New”, then, in the following menu, click on
“Folder”. )
Enter a name for your new folder, click on “Enter”, then double-click on the
folder to open it. In the “Home” tab, choose “Paste” (or click simultaneously on
the “Ctrl” and “V” keys). The photos and videos will be copied in the new folder.
ON A MAC
Click on the search tool in the “Toolbar”. Click the “Go” Tab, then select
“Computer”.
Locate your device under the “Locations” tab and click to access it. Then click
on “DCIM” and “100DSCIM” to nd all saved photos and videos.
Click on “Edit” in the toolbar at the top of the screen, then click on “Select all”
to highlight all individual les on the device. You can also access the “Select all”
option by simultaneously clicking “Cmd” and “A”. If you don’t want to import
everything, you can highlight the desired photos or videos individually. Transfer
photos and videos by clicking on “Cmd” and on the le name. Click on “Edit
again” and then “Copy ” (or “Cmd” and “C”) to copy the highlighted les.
Access the folder where you want to save your photos and videos, or create a
new folder by right-clicking and pressing “Cm d” at the same time, then select
“New folder” from the menu.
Once your photos and videos are transferred, click the “Safely remove
hardware and eject media” button located in the task bar, then click
“Eject mass media storage device”.
If you do not want to select all photos or videos, hold down the “Ctrl” key and
click on the les you want to select before clicking on the “Copy” icon.
Click on “Modify”, then on “Co py” (or “Cmd” and “V”) to copy your chosen
les in the selected folder. The photos and videos can take a few minutes to
download, depending on the size and the number of the le you are importing.
Once your photos and videos are transferred, click on the “Eject” icon beside
the name of your device, than unplug the device from your MAC.
19
Offered Accessories
FLEX G-36SPYPOINT
LITHIUM BATTERY SOLAR PANEL
Compatible with all SPYPOINT devices with
a 12 V socket. DC power adapter, mounting
bracket and installation strap.
#SPLB-22
12 V BATTERY, CHARGER & HOUSING KIT
Compatible with all SPYPOINT devices with a
12 V socket. Case, AC charger, 12 ft (3.6 meters)
power cable (#PW-12FT) and strap included.
#KIT-12V
RECHARGEABLE LITHIUM BATTERY PACK
Rechargeable lithium battery pack and
charging cable included. 7.4 voltage.
#LIT-22
FLEX CAMERA STEEL SECURITY BOX*
Fits the SPYPOINT FLEX cameras.
#SB-500
L
o
c
k
HIGH SPEED / HAUTE VITESSE
32 GB
adapter / adaptateur
12 V POWER CABLE
12 feet (3.6 meters) cable with alligator clips
to connect to a 12 V camera battery.
#CB-12FT
LONG RANGE CELLULAR ANTENNA
Boosts the cellular signal. 15 feet (4.57 meters)
cable. No external power source necessary.
#CA-01
CABLE LOCK
6 feet (4.57 meters) cable lock compatible with
all cameras and security boxes from SPYPOINT.
#CLM-6FT
32 GB MICROSD CARD
Package including a 32 GB microSD
card and an adapter. High speed, class 10.
10-year warranty.
#MICRO-SD-32GB
ADJUSTABLE MOUNTING ARM
Fits any camera with a standard ¼"-20
screw-in tripod mount.
#MA-500
For more information about other available accessories,
got to www.spypoint.com.
*Steel boxes may aect wireless connectivity, especially in low-reception areas.
20
Troubleshooting
ISSUES POSSIBLE SOLUTIONS
FLEX G-36SPYPOINT
MY CAMERA DOES NOT TURN ON
MY CAMERA DOESN'T HAVE GOOD SERVICE
1. Check to ensure the camera has good batteries.
2. Slide the power switch to the o position and then back to the on position.
1. Ensure the antenna is properly attached to the camera.
2. Move the camera to a dierent location.
21
Warranty
LIMITED WARRANTY
This SPYPOINT product is covered by a 2-year warranty that also covers parts and
workmanship from the purchase date. The electronic cash register receipt is a proof
of purchase and must be presented to conrm that the warranty is applicable.
This warranty will be honored in the country of the original purchase only.
THIS SPYPOINT WARRANTY DOESN’T APPLY TO:
• Consumable parts, including but not limited to batteries,
the performance of which are known to decrease over time.
• Damages caused by improper use of the device, use of the device
with another product, negligence, accidents, contact with liquid,
res, earthquakes, or any other type of external causes.
• SPYPOINT products bought online from an unauthorized retailer.
• Products that were modied or altered.
• Aesthetic damages, including but not limited to scratches or plastic breakage.
• Damages caused by the usage of a product outside of the SPYPOINT recommendations.
FLEX G-36SPYPOINT
22
Regulation
FLEX G-36SPYPOINT
FCC STATEMENT
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
CE STATEMENT
Herby, SPYPOINT declares that this trail camera model FLEX G-36 is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this
product allowed to be used in all EU member states.
Use the FLEX G-36 in the environment with the temperature between -1°C and 35°C.
IC STATEMENT
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
The term “IC:“ before the certication/registration number only signies that
the Industry Canada technical specications were met. This product meets the
applicable Industry Canada technical specications.
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
23
Disposal & frequency
FLEX G-36SPYPOINT
DISPOSAL
ONLY USE ORIGINAL SPARE PARTS AND ACCESSORIES.
If, one day, your camera has been used so intensively that it has to be replaced,
or if you no longer have any use for it, you are obliged to dispose of it at a
recycling center.
Information on return points for your electrical appliance can be obtained
from your local waste disposal company or from your local administrative
oces.
Electrical appliances not only contain valuable recyclable raw materials, but
also substances which, if disposed of improperly, can aect public health and
the environment. Help ensure that valuable raw materials are recycled by
returning your old appliance to a central collection point.
The WEEE (Waste Electrical and Electronic Equipment Directive) symbol
represents the obligation for the labeled camera to be sent to a separate
center for the proper recycling of electrical and electronic equipment.
FREQUENCY
FREQUENCY RANGE:
800/850/900/1900/2100 MHz
MAXIMUM TRANSMISSION POWER:
FREQUENCY MAX.
GSM850 33 DBM ± 2 DB
EGSM900 33 DBM ± 2 DB
DCS1800 30 DBM ± 2 DB
PCS1900 30 DBM ± 2 DB
GSM850 (8-PSK) 27 DBM ± 3 DB
EGSM900 (8-PSK) 27 DBM ± 3 DB
DCS1800 (8-PSK) 26 DBM ± 3 DB
PCS1900 (8-PSK) 26 DBM ± 3 DB
UMTS 2100 24 DBM + 1,7/-3,7 DB
UMTS 1900 24 DBM + 1,7/-3,7 DB
UMTS 900 24 DBM + 1,7/-3,7 DB
UMTS 850 24 DBM + 1,7/-3,7 DB
UMTS 800 24 DBM + 1,7/-3,7 DB
SPYPOINT FLEX G-36 | Made in India
12 V DC • LIT-22 Lithium battery pack • 8 X R6 (AA) batteries (2 X 6 V)
Contain FCC ID: XMR201807EG91NA • IC: 10224A-2018EG91NA
Manufacturer: SPYPOINT
Address: 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
E-mail: info@spypoint.com
Importer Information: SPYPOINT
Company Name: SPYPOINT
Address: 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada
Distribution Center 3000 Gannett Avenue, Des Moines IA 50321 • USA
EUROHUNT GmbH Harzblick 25, 99768 Harztor OT Ilfeld • Germany
24
Loading...