P INTSPY INTPSPY
Surveillance camera
Adventure series
Models:
BF-6 BF-8
HD-7 2N1
C6 ECLYPSE
M8
Quick start guide
Getting started
1
Settings
2
Error messages
3
Complete instructions
4
www.spypoint.com
v1.4
Getting started
1
Useful! Detach a section and insert it into the
sleeve provided for this purpose within the
housing for the camera.
COMPONENTS
1
2
3
4
11
10
12
13
14
15
5
1 Photo lens Image sensor and infrared lter.
2 Invisible
LEDs or
Infrared LEDs
(depending on the
camera)
3 Test light
(located at
the top right
for models
with 35
LEDs)
4 Fresnel lens Expands the detection area and increases
6
7
8
9
16
17
18
19
5 12V power
jack
6 Tripod mount Standard ¼-20” tripod mount.
7 Microphone
(if applicable)
8 Solar panel
jack
(if applicable)
9 35 invisible
LEDs and
Flash
(if applicable)
10 Battery
switch
11 Conguration
screen
12 BUSY LED Lights up when the camera is recording.
Night lighting to obtain black and white
photos and videos.
Flashes in SET/TEST mode when there is
detection and ashes 60 seconds in PHOTO/
VIDEO mode to allow the user to leave with-
out being photographed or recorded.
the sensitivity of the camera’s motion sensor.
This camera can be powered from an
external 12-volt DC input such as a 12V
battery or a 12V adapter, sold separately.
To record sound, lift the rubber cap and turn
it slightly to completely clear the microphone
receiver.
Allows the user to connect a solar panel
(SP-12V) to maintain the charge of the
lithium battery pack (LIT-09/LIT-C-8), sold
separately.
Interchangeable units (see FLASH UNIT
INSTALLATION section for more details)
Allows the user to select the power source
according to the type of batteries used.
To see battery level, date, number of recorded
les, error messages and settings options.
13 Switch panel Buttons to set the camera.
14 ON/OFF Allows the user to turn on/off the camera.
15 Battery case Insert 6 AA batteries (alkaline or lithium) or
16 TV OUT To view or delete photos/videos directly on
17 USB port To transfer photos/videos to a computer.
18 SD card slot An SD card is required to record photos/
19 DISTANCE
dial
BATTERY INSTALLATION
6 alkaline AA batteries
We recommend the use of new batteries to ensure a maximum
performance of the camera. Rechargeable AA batteries are not
recommended.
a rechargeable lithium battery pack (LIT-09/
LIT-C-8, sold separately).
TV.
videos. The camera is compatible with SD/
SDHC memory card, up to 32 GB capacity
(not included).
Allows the user to adjust the distance of
detection and the sensitivity of the detector.
See DISTANCE section for more details.
Lithium battery pack
LIT-09/LIT-C-8
Battery switch position (depending on the power source)
Power source Battery switch position
• 6 AA
• 12V
• 12V + 6 AA
• LIT-09*
• 12V + LIT-09*
• Solar panel + LIT-09*
(for cameras compatible with
solar panel)
* Rechargeable lithium battery pack, sold separately (LIT-09) or with
a charger (LIT-C-8).
MEMORY CARD INSTALLATION
Insert an SD/SDHC memory card (up to 32 GB
capacity) in the card slot. The card is inserted
correctly when a click is heard.
card, always turn off the camera to
prevent loss or damage of the photos already
recorded.
FLASH UNIT INSTALLATION (if applicable)
Install the Flash unit to obtain color photos by
day and night.
ALK
LIT-09 or RECH
(depending on the camera)
Before inserting or removing a memory
It is not possible to take videos at night
with the Flash unit.
INSTALLATION WITH THE SUPPLIED STRAP:
vimeo.com/spypointxcelcam
youtube.com/spypointtrailcam
twitter.com/SpypointCamera
vimeo.com/spypointxcelcam
cam
twitter.com/SpypointCamera
vimeo.com/spypointxcelcam
Recommended installation height: about 3 feet above the ground.
Do not place the camera facing the sun.
Settings
2
SETTINGS
A
B
C
A: Photo quality (High/Low)
B: Number of recorded les
C: Date/Time (MM/DD/YY, hh:mm)
D: Temperature (Celcius/Farenheit)(if applicable)
1. Set to SET/TEST mode.
2. Press OK to edit option.
3. Press UP and DOWN to modify the option.
4. Press OK to set next option or to conrm.
5. Turn OFF the camera to record settings.
6. Turn ON the camera, then set to PHOTO or VIDEO mode to operate
the camera.
D
MODE
1
PHOTO After 60 seconds, the camera starts in photo mode to take
VIDEO After 60 seconds, the camera starts in video mode to take
SET/
TEST
VIEW Allows the user to view or delete recorded photos and
2
DELAY
Allows the user to choose the time interval between each detection
before the camera records the next photo or video.
MULTI-SHOT
3
Takes up to 4 consecutive shots at each detection, with a 10 second
delay between each photo. For the cameras with a Flash unit, the
delay between each photo will be 15 seconds. This option is available
in PHOTO mode only.
VIDEO LENGTH
4
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
1 2 3
4
photos.
videos.
Allows the user to test the detection system of the
camera. When the SET/TEST mode is selected, no photo
or video is recorded. Pass in front of the camera from left
to right. When the camera detects a motion, the test light
blinks to indicate that the camera would normally have
saved a photo or video. If the system does not detect
the movement, increase the detection distance using the
DISTANCE wheel or realign the system differently.
videos on a television.
DISTANCE
Turn the DISTANCE dial to the right to increase the detection distance
and the sensitivity of the detector.
The camera is equipped with a detector sensitive to infrared. The
system will only detect a heat source in motion. The greater the mass
of heat, the more sensitive the system is. The range of detection is
between 5 and 65 feet. The best way to adjust the distance is to set
the camera to SET/TEST mode. Make sure to have the least amount
of objects possible in front of the camera during positioning. This will
prevent photos being taken by the camera when oriented towards the
sun at the same time an object moves in front of the camera (e.g. a
branch).
Here is a table of approximate detection distances and width of the
detection area according to the DISTANCE dial setting. The data can be
affected by the size of the subject and the outside temperature. Note
that this data is for illustrative purposes only.
Value on
dial
MIN
2
4
6
8
MAX
Sensitivity
Gradually
increases
Detection
distance
(ft)
5-30 3
30-50 15
50-65 30
Width of the
detection area(ft)
CAMERA
3
15
30
Error messages
3
There is no memory card in the camera,
insert a card.
The memory card is full, delete les or use a
new memory card.
Complete instructions
4
Visit www.spypoint.com, the complete instructions for your camera
can be found in the Support section.
Support
1-888-779-7646 tech@spypoint.com
Join the SPYPOINT® community
facebook.com/spypoint
twitter.com/SpypointCamera
youtube.com/spypointtrail
Loading...