Sportsman SSPWBS Assembly Instructions Manual

SSPWBS

Stainless Steel Work Work Bench/Table

Assembly Instructions

Max Weight Capacity = 165 Lbs

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website

http://www.sportsmanseriesbrand.com or call Customer Service at

1-888-287-6981, Monday-Friday,

8 AM - 4 PM Central Time. A copy of the sales receipt is required.

KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE

PARTS LIST

Check all packaging materials for
any small parts that may have come loose during
shipping. Before assembly, locate and identify all parts.

Table - 1 Piece

Base - 2 Pieces

M4 Screws - 4 Pieces

M6 Screws - 8 Pieces

Fig 2A

Fig 3
Fig 2

Fig 1
Fig 2B

Fig 3A

Fig 4

Fig 5

Fig 6

Fig 6A

ASSEMBLY INSTRUCTION

WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.

WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.

WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF.

1. Place the table on its side on the floor. ［Fig 1］

2. Assemble the bases on each side of the bottom of the table by using two M4 Screws ［Fig 2,
2A, ］and four M6 Screws per base.［Fig 2B］

3. Unlock the chain from the hook under table top , and then insert it under top shelf. ［Fig 3, 3A］

4. Unfold the table ［Fig 4］, and then stand up. ［Fig 5］

5. Fold down the top shelf.［Fig 6］

6. Lock the top shelf in place using locks on both sides. ［Fig 6A］

Safety Tips

· Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.

· Do not overload the table or shelf.

Cleaning

· Before use, remove protective film then clean the table.

· Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.

· Always remove cleaning agent residues, as this can discolor the surface.

· Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.

201704