Spirit XT685 User Manual

Treadmill

XT685

Please carefully read this entire manual before operating your new treadmill

OWNER’S MANUAL

XT685

Treadmill

Product Registration

Table of Contents

Important Safety Instructions

Important Electrical Instructions

Important Operation Instructions

XT685

Transportation Instructions

Product Features

Operation of Your Console

Programmable Features

Using Heart Rate Transmitter

Assembly Instructions

General Maintenance

Service Checklist - Diagnosis Guide

Manufacturer’s Limited Warranty

ATTENTION

This treadmill is intended for residential use only and is warranted for this application. Any other application voids this warranty in its entirety.

Treadmill

XT685

Congratulations on your new treadmill and welcome to the Spirit Fitness family!

Thank you for your purchase of this quality group treadmill from Spirit Fitness. Your new treadmill was manufactured by one of the leading tness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. If not purchased direct from Spirit Fitness, the local dealership where you purchased this treadmill is your administrator for all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difculties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new treadmill.

Product Registration

Yours in Health, Spirit Fitness

Name of Dealer

Dealer Phone #

Purchase Date

Record Your Serial Number

Please record the serial number of this tness product in the space provided below.

Serial Number

The self-addressed product registration card must be completed in full and returned to Spirit Fitness. You can also go to https://www.spirittness.com/residentialwarrantyregistration.html to register online.

XT685_20110623

XT685

When using an electrical appliance, basic precautions hsould always be followed, including the following:

Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock:

1. Always unplug this applicance from the electrical outlet immediately after using and before cleaning.

WARNING - To reduce the risk of burns, re electric shock, or injury to persons:

1. An appliance should never be left unattended when plugged in. Unplug from outlet when not

in use, and before putting on or taking off par ts.

2. Do not operate under blanket or pillow. Excessive heating can occur and cause re, electric

shock, or injury to persons.

3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or

disabled persons.

4. Use this appliance only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it

has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

6. Do not carry this appliance by supply cord or use cord as a handle.

7. Keep the cord away from heated surfaces.

8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint,

hair, and the like.

9. Never drop or insert any object into any opening.

10. Do not use outdoors.

11. Do not operate where aerosol (spray) products are being use or where oxygen is being ad

ministered.

12. Connect this appliance to a properly grounded outlet only. See Grounding Instructions.

13. The appliance is intended for household use.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Safety Instructions

Treadmill

XT685

WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a large

motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment. The operating temperature specication is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing (no water drops forming on surfaces).

Circuit Breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur when a treadmill is rst turned on or even during use. If your treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This is not a warranty defect. This is a condition we as a manufacture have no ability to control. This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or available online at www.squared.com part #QO120HM.

Grounding Instructions

This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not t the outlet; have a proper outlet installed by a qualied electrician.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet, (shown below) can be installed by a qualied electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Important Electrical Instructions

XT685

 NEVER operate this treadmill without reading and completely understanding the results of

any operational change you request from the computer.

 Understand that changes in speed and incline do not occur immediately. Set your desired

work level on the computer console and release the adjustment key. The computer will obey the command gradually.

 NEVER use your treadmill during an electrical storm. Surges may occur in your household

power supply that could damage treadmill components. Unplug the treadmill during an electrical storm as a precaution.

 Use caution while participating in other activities while walking on your treadmill; such as

watching television, reading, etc. These distractions may cause you to lose balance which may result in serious injury.

 Do not use excessive pressure on console control keys. They are precision set to function

properly with little nger pressure.

Safety Tether Cord

 A safety tether cord is provided with this unit. It is a simple magnetic design that should be

used at all times. It is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop tread-belt movement. To Use:

1. Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in normal operation.

Important Operation Instructions

Treadmill

XT685

Assembly Video

To assist you in assembling your new Spirit Fitness treadmill, we have posted an assembly video at the following link: http://www.spirittness.com/customerservice/video/treadmillvideos.html

Pre-Assembly

1. Cut the straps, then along the dotted line on the bottom of the box; lift the box over the unit and unpack.

2. Locate the hardware package. Remove the tools rst. Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis (#) are the item number from the assembly drawing for reference.

Assembly Tools

XT685

Assembly Instructions

#107. Combination M5 Allen Wrench/

Phillips Head Screw Driver

#106. M6 Allen

Wrench

#109. Phillips Head Screw Driver

#63. Safety Key

#18. Deck/Belt

Lubricant

XT685

STEP 1: Console Mast Tubes

1. Slide the bottom console covers onto the console mast tubes (52 onto 5 Left side & 53 onto 4 Right side). Make sure they are oriented as shown in the illustration.

2. Connect computer cables (32 & 33) on the right side.

3. Insert console mast tubes (4 & 5) into the frame. Caution: Be careful not to pinch the cables you

just connected. Doing so could affect the console function. Pull the end of the cable tight as you insert the right console mast tube.

4. Insert three Button Head Socket Bolts (102) and one Button Head Socket Bolt (103) and Split Washer (108) on each side. Par tially tighten these using the M6 Allen Wrench (106). Don’t completely tighten these until the end of step 3.

HARDWARE

#102. 5/16” x 15mm

Button Head Socket

Bolt (6 pcs)

Treadmill

#108. 3/8” x 2T

Split Washer

(2 pcs)

#103. 3/8” x 2”

Button Head Socket Bolt

(2 pcs)

Treadmill

XT685

STEP 2: Console

1. Connect the following cables together: Incline cables (35) to (39), Speed cables (34) to (38), and Computer cables (33) to (31).

2. Place the console (37) onto the brackets at the top of the console mast tubes and attach with two Button Head Bolts (104) and two Split Washers (108) on each side. Caution: Be careful not to pinch any of the cables. Doing so may affect the console function. Firmly tighten with the Combination M5 Allen Wrench & Phillips Head Screw Driver (107).

HARDWARE

#108. 3/8” x 2.0T

Split Washer (4 pcs)

Treadmill

#104. 3/8” x 1-3/4”

Button Head Socket

Bolt (4 pcs)

+ 26 hidden pages