Spirit XE 195, XE295 User Manual

OPERATING YOUR NEW ELLIPTICAL!

OWNER’S MANUAL

Elliptical

Z100 / Z300

Z500

XE 195

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

Z700

XE 295

Table of Contents

Product Registration…………………………………………………………………………. .2

Important Safety Instructions…………………………………………………………………3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..4

Assembly Instructions………………………………………………………………………….5

Features……………………………………………………………………………………….. 17

Operation of Your New Elliptical……………………………………………………………..18

Maintenance……………………………………………………………………………………29

Manufacturer’s Limited Warranty…………………………………………………………….30

ATTENTION-

ONLY AND IS WARRANTED FOR THAT APPLICATION. ANY OTHER

APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.

THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE

XE195 / XE295 Elliptical

TO THE SPIRIT FAMILY!

CONGRATULATIONS ON YOUR

NEW ELLIPTICAL AND WELCOME

Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc. Your new elliptical was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this elliptical is your administrator for all Spirit warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today and enjoy your new elliptical.

Yours in Health, Spirit Manufacturing, Inc.

Name of Dealer______________________________________ Telephone Number of Dealer___________________________ Purchase Date_______________________________________

Product Registration

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below. The serial number is located on the console mast frame under the console mast cover, which needs to be removed to gain access.

The self-addressed product registration card must be completed in full and returned to Spirit Manufacturing, Inc or visit: www.spiritfitness.com/warranty.asp to register online.

Serial Number_______________________________________

XE195 / XE295 Elliptical

Ver.A

Important Safety Instructions

WARNING - Read all instructions before using this appliance.

■ Do not operate carpet and

■ Keep children away from the

caution areas that can cause harm.

■ Keep hands away from all moving parts.

■ Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working

properly, call your dealer.

■ Keep the cord away from heated surfaces.

■ Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous environment.

■ Never drop or insert any object into any openings.

■ Do not use outdoors.

■ To disconnect, turn all controls to the off position, then remove the plug from the outlet.

■ Do not attempt to use your

intended.

■ The hand pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your

elliptical

on deeply padded, plush or shag carpet. Damage to both

may result.

elliptical

. Quality athletic shoes are recommended to avoid leg fatigue.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

. There are obvious pinch points and other

for any purpose other than for the purpose it is

XE195 / XE295 Elliptical

Important Electrical Information

WARNING!

●

NEVER remove any cover without first disconnecting AC power supply.

●

If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may

be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing.

●

NEVER expose this

Use outdoors, near a pool or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).

elliptical

to rain or moisture. This product is NOT designed for

Important Operation Instructions

●

NEVER operate this elliptical without reading and completely understanding the results of

any operational change you request from the computer.

●

Understand that changes in resistance do not occur immediately. Set your desired level on

the computer console and release the adjustment key. The computer will obey the command gradually.

●

NEVER use your elliptical during an electrical storm. Surges may occur in your household

power supply that could damage elliptical components.

●

Use caution while participating in other activities while using your elliptical such as watching

television, reading, etc. These distractions may cause you to lose balance and may result in serious injury.

●

Always hold on to a handrail or hand bar while making control changes.

Things To Know

Your new elliptical is engineered and manufactured to the strictest industry standards and tolerances. An inherent problem with elliptical trainers, which affects all manufacturers of these products, is the multitude of moving linkages and parts. Even with the tightest mechanical tolerances there still could be a slight amount of play between some parts. This inherent play can result in slight noises during use such as clicks and small thumps. Please expect that the elliptical will not be completely silent.

XE195 / XE295 Elliptical

Assembly Pack Check List XE195

Step 1

Step 2

#96. 3/8" x 2T Split Washer (1pc)

#103. 3/8" x 3/4" Hex Head Bolt (2pcs)

#84. 3/8" x 23 x 1.5T Curved Washer (2pcs)

#66. M5 x 10mm Phillips Head Screw (4pcs)

#60. 3/8" x 2-1/4" Hex Head Bolt (1pc)

Step 3

#79.5/16"x23mm Flat Washer (2pcs)

#80. 5/16" x 20mm Flat Washer (2 pcs)

XE195 / XE295 Elliptical

#83. ψ 17mm Wave Washer (2 pcs)

#104. 5/16” x 1-1/4” Hex Head Bolt (2 pcs)

#59. 5/16"x15m/m Hex Head Bolt (2 pcs)

#71. 5/16" x 7T Nylon Nut (2 pcs)

Step 4

#87. ψ 3.5x12m/m Sheet Metal Screw (10pcs)

Tools

#108. Phillips Head Screw Driver (1 pc)

#105.M5 x 15m/m Phillips Head Screw (17pcs)

#107. Short Phillips Head Screw Driver (1 pc)

#109. 12m/m Wrench (1pc)

XE195 / XE295 Elliptical

#106. 13/14m/m Wrench (1pc)

Assembly Instructions XE195

STEP 1: CONSOLE MAST ASSEMBLY

Locate the Console Mast (12) and Console Mast Cover (41) and slide the Cover onto the mast as far as it will go. Make sure the Console Mast Cover is facing the correct way.

2. Unravel and straighten out the Computer Cable (31) and feed it into the bottom of the console mast tube and out of the top opening.

3. Install the Console Mast into the receiving bracket in the top of the Main Frame. NOTE: there is one bolt already installed in the receiving bracket that will engage with the slot at the bottom of the Console Mast. This needs to be tightened at the end along with the three other console mast bolts.

Do not pinch the wire harness during this step.

4. Put one 3/8" x 2T Split Washer (96) onto the 3/8" x 2-1/4" Long Hex Head Bolt (60), and the

two 3/8" x 23mm Curved Washers (84) onto the two 3/8" x 3/4" Short Hex Head Bolts (103). Install the Long Hex Head Bolt (60) through the left side of the receiving bracket into the Console Mast and the short bolts (103) through the front.

XE195 / XE295 Elliptical

5. With the 13/14mm Wrench tighten the three bolts, and the fourth bolt which is pre-installed, firmly. These bolts should be tightened as much as you possibly can.

6. There will be three electrical wire connectors at the top opening of the console mast, two 2 pin connectors for hand pulse sensors (36), one 10 pin connector for main wire harness (31) and one connector for the handle bar resistance switches (145). Connect these to the mating connectors on the back of the electronic Console (30). The connectors are keyed, you cannot plug them in the wrong way so do not force them. The two, 2 pin connectors can be plugged into either connector on the back of the console.

7. Storing the excess wire back into the Console Mast, carefully install the Console onto the mounting plate of Console Mast and secure using the four M5 x 10mm Phillips Head Screws (66).

Make sure the wires do not get pinched between the console and mounting plate.

STEP 2: HANDLE BAR ASSEMBLY

1. Install the two 17mm Wave Washers (83) onto the Left and Right side of the Handle Bar axle.

2. Slide the Left (10) and Right (11) Handle Bars onto the appropriate side of the axle. The handlebars have a small sticker on them indicating L (left) and R (right).

3. Put the two 5/16" x 23mm Flat Washers (79) onto the two 5/16" x 15mm Hex Head Bolts (59) and install in the threaded holes in the ends of the axle.

XE195 / XE295 Elliptical

STEP 3: CONNECTING ARM ASSEMBLY

1. Align the hole in the rod end of the left Connecting arm (8) with the hole in the bracket of the left Handle Bar (10). The rod end should be on the inner side of the Handle Bar bracket. Make sure the ty-wrap is removed from the rod end and the sleeve spacer (22) does not fall out during assembly. Take one 5/16" x 1-1/4" Hex Head Bolt (104) and install it through the Handle Bar bracket and the rod end. Install one 5/16" x 20 x 1.5T Flat Washer (80) and one 5/16" x 7mm Nylon Nut (71) on the 5/16" x 1-1/4" Hex Head Bolt (104) and tighten as tight as possible using the two12m/m Wrenches provided. Repeat the procedure for the right side Pedal Connecting Arm.

XE195 / XE295 Elliptical

+ 21 hidden pages