Spirit XBR55 User Manual
Please carefully read this entire manual before operating your new tness bike
Fitness Bike
XBR55
OWNER’S MANUAL
Product Registration
Table of Contents
1
Important Safety Instructions
Important Electrical Instructions
XBR55
Product Features
Operation of Your Console
Programmable Features
Using A Heart Rate Transmitter
General Maintenance
Manufacturer’s Limited Warranty
Assembly Instructions
2
3
4
9
11
15
22
24
25
ATTENTION
This tness bike is intended for residential use only and is warranted for this
application. Any other application voids this warranty in its entirety.
XBR55
Fitness Bike
2
XBR55
Congratulations on your new tness bike and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality group tness bike from Spirit Fitness. Your new
tness bike was manufactured by one of the leading tness manufacturers in the world and is
backed by one of the most comprehensive warranties available. Through your dealer, Spirit Fitness
will do all we can to make your ownership experience as pleasant as possible for many years to
come. If not purchased direct from Spirit Fitness, the local dealership where you purchased this
tness bike is your administrator for all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate your
support and we will always remember that you are the reason that we are in business. Please
complete and mail your registration card today and enjoy your new tness bike.
Product Registration
Yours in Health,
Spirit Fitness
Name of Dealer
Dealer Phone #
Purchase Date
Record Your Serial Number
Please record the serial number of this tness product
in the space provided below.
Serial Number
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to Spirit
Fitness. You can also go to https://www.spirittness.com/residentialwarrantyregistration.html
to register online.
1
XBR55_20110623
Fitness Bike
XBR55
WARNING - Read all instructions before using this appliance.
If using the optional power supply:
DANGER - To reduce the risk of electric shock disconnect your Spirit Fitness tness bike from
the electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, re, electric shock, or injury to persons, install
the tness bike on a at level surface with access to a 110-volt, 15-amp grounded outlet with
only the tness bike plugged into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY
ONE OUTLET ON THE END:
Do not operate tness bike on deeply padded, plush or shag carpet. Damage to both carpet
and tness bike may result.
Keep children away from the tness bike. There are obvious pinch points and other
caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the tness bike if it has a damaged cord or plug. If the tness bike is not
working properly, call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position, then remove the plug from
the outlet.
Do not attempt to use your tness bike for any purpose other than for the purpose it is
intended.
The hand pulse sensors are not medical devices. Their purpose is to provide you with an
approximate measurement in relation to your target heart rate. Use of a chest transmitter
strap (sold separately) is a much more accurate method of hear t rate analysis . Various
factors, including the user’s movement, may affect the accuracy of heart rate readings. The
pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your tness bike. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Important Safety Instructions
Fitness Bike
2
XBR55
WARNING!
NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten
percent (10%) or more, the performance of your tness bike may be affected. Such
conditions are not covered under your warranty. If you suspect the voltage is low, contact your
local power company or a licensed electrician for proper testing.
NEVER expose this tness bike to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The operating
temperature specication is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing
(no water drops forming on surfaces).
Imporant Operation Instructions
NEVER operate this tness bike without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in resistance do not occur immediately. Set your desired resistance
level on the computer console and release the adjustment key. The computer will obey the
command gradually.
NEVER use your tness bike during an electrical storm. Surges may occur in your house-
hold power supply that could damage tness bike components. Unplug the tness bike during
an electrical storm as a precaution.
Use caution while participating in other activities while pedaling on your tness bike; such as
watching television, reading, etc. These distractions may cause you to lose balance which may
result in serious injury.
Do not use excessive pressure on console control keys. They are precision set to function
properly with little nger pressure.
Important Electrical Instructions
3
Fitness Bike
XBR55
Assembly Video
To assist you in assembling your new Spirit Fitness tness bike, we have posted an assembly video at the
following link: http://www.spirittness.com/customerser vice/video/tnessbikevideos.html
Pre-Assembly
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the bottom
edge of the carton and pull it away from the cardboard underneath, separating the staples that join the two
together. Lift the box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are
found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools rst. Remove the
hardware for each step as needed to avoid confusion. The numbers in the instructions that are in parenthesis
(#) are the item number from the assembly drawing for reference.
Assembly Tools
#114.Phillips Head
Assembly Instructions
Screwdriver
#115.L Allen Wrench
XBR55
#112.12/14mm
Wrench
Fitness Bike
#113.13/15mm
Wrench
4
#130.13/14mm
Wrench
XBR55
STEP 1: Rear Stabilizer & Seat Back
1. Attach the Rear Stabilizer (7) to the Main Frame (1) with the four Hex Head Bolts (65) and four Flat Washers
(84). Tighten completely with the wrench (112).
2. Attach the Seat Back (5) to the Seat Carriage (4) of the main frame. Slide a Hex Head Bolt (67) through each
side, then attach a Nyloc Nut (89) to each bolt. Tighten the bolts just enough so there is no side to side play, but
freedom of movement front to back. Use the wrenches provided (112 & 130).
HARDWARE
#89.3/8” x 7T
Nyloc Nut
(2 pcs)
#84.3/8” x 25 x 2T
Flat Washer
(4 pcs)
#65. 3/8” x 2-1/4”
Hex Head Bolt (4
pcs)
5
#67.3/8” x 4”
Hex Head Bolt
(2 pcs)
Fitness Bike
Loading...