Spicer HAXL-PNI-33 User Manual

®

HAXL-PNI-33
GENUINE SPICER BEARING CUP & CONE
CHANGES IN D/R404 FAMILY AXLES

PART NUMBER INFORMATION

DATE: 2/21/2013

TO: All Dana Aftermarket Group Spicer

Affected Models: D/R344, 404, 405, DSP/RSP40, 41, DST40, 41, DSH/RSH40, 44, 19060S, 21060S,
22060S, P20060S, P210060S, and P22060S

A product design change to carrier bearings was made to the models listed above. In order to meet more
demanding application and performance expectations, Dana has now implemented the use of new
design, case hardened carrier bearings beginning as early as May 2011. The change to new bearings will
impact service parts in a variety of ways. In some cases, new service items have been released to
address the most important issue of keeping mating bearing cones and cups from the same supplier
together. All part changes have been outlined below to minimize any potential mixing of bearing parts
from different suppliers.

Bearings are manufactured and used in sets to maximize full life of the product

•

• NOT using SPECIFIED bearings in Dana carriers can create potential noise issues or lead to premature

bearing failures and affect the warranty of product

• Mixing of bearing cups and cones can create potential noise issues or lead to premature bearing failures

• These New and Old bearing cones and cups are manufactured by different suppliers

• Superseding OLD individual part numbers directly to the NEW individual part numbers could lead to mixing

of parts that could lead to potential failures. DO NOT MIX CONES AND CUPS MANUFACURED BY

DIFFERENT SUPPLIERS

SPICER® GENUINE BEARING KITS: Dana will begin to change the bill of materials of the

service kits listed below and will do so on a running basis. Spicer
approved mating cones and cups.

Dana Part-no. Description Model

216220 Basic Overhaul Kit DS404 before June 2008
216221 Basic Overhaul Kit RS404, 19060S/21060S
504121 Basic Overhaul Kit RS404, 19060S/21060S
217463 Basic Overhaul Kit DD404 before June 2008
217464 Basic Overhaul Kit RD404 / 19060D/21060D
504030 Basic Overhaul Kit D40K – All standard models after June 2008
504031 Basic Overhaul Kit D40K – All diff-lock models after June 2008
216234 Bearing Kit DS404 before June 2008
216248 Bearing Kit RS404, 19060S/21060S, P20060S-P22060S
504119 Bearing Kit RS404, 19060S/21060S, P20060S-P22060S
504017 Bearing Kit 17060S, 19060S
512800 Bearing Kit DD404 before June 2008
512805 Bearing Kit RS404, 19060S/21060S
504117 Carrier Rebuild Kit DD404 before June 2008
504118 Carrier Rebuild Kit DS404 before June 2008
504120 Carrier Rebuild Kit DS404 before June 2008

Service Parts Heavy Axle Customers

®

service kit contents will always contain

Spicer Service Parts  Dana Holding Corporation  www.spicerparts.com  www.dana.com

1 of 3

INDIVIDUAL BEARINGS: Individual bearings cones and cups are sold separately thru service.

They should always be used and installed as matched sets. When stock of the individual old bearing part
numbers are exhausted the part will simply be listed as No Longer Available. Customers should reference
the content of this bulletin and the chart below to help ensure bearing cones and cups from the same
supplier are purchased and used together. The chart below shows the mating cones and cups and the
primary location of the carrier the bearings are used in.

•

IMPORTANT: These New and Old bearing cones and cups are manufactured by different suppliers. Superseding OLD
individual part numbers directly to the NEW individual part numbers could lead to mixing of parts that could lead to
potential failures. DO NOT MIX CONES AND CUPS MANUFACURED BY DIFFERENT SUPPLIERS. Customer systems
should be properly noted or coded so parts are not mixed.

New Old
Dana Original Bearing Part Original Bearing Design
P/N Description P/N Location Reference Information

134291 Bearing Cone 129560 Inner Pinion NP900 design
134292 Bearing Cup 129561 Inner Pinion NP900 design
134291 Bearing Cone 085439 Inner Pinion Industry # 72218C
134292 Bearing Cup 014217 Inner Pinion Industry # 72487

134294 Bearing Cone 127535 Outer Pinion Industry # 55212C
134295 Bearing Cup 012495 Outer Pinion Industry # 55437

134297 Bearing Cone 129563 Flange Half Case NP900 design
134298 Bearing Cup 129564 Flange Half Case NP900 design
134297 Bearing Cone 006082 Flange Half Case Industry # 567
134298 Bearing Cup 090943 Flange Half Case Industry # 563

134300 Bearing Cone 129565 Plain Half Case NP900 design
134301 Bearing Cup 129566 Plain Half Case NP900 design
134300 Bearing Cone 027813 Plain Half Case Industry # 497
134301 Bearing Cup 009803 Plain Half Case Industry # 493

134303 Bearing Cone 129558 Input Shaft NP900 design
134304 Bearing Cup 129559 Input Shaft NP900 design
134303 Bearing Cone 820643 Input Shaft Industry # 555S
134304 Bearing Cup 1008912 Input Shaft Industry # 552A

134306 Bearing Cone 129562 Inner Pinion R-mdls NP900 design
134292 Bearing Cup 129561 Inner Pinion R-mdls NP900 design
134306 Bearing Cone 014218 Inner Pinion R-mdls Industry # 72212C
134292 Bearing Cup 014217 Inner Pinion R-mdls Industry # 72487

134308 Bearing Cone 012496 Outer Pinion R-mdls Industry # 55200C
134295 Bearing Cup 012495 Outer Pinion R-mdls Industry # 55437

134331 Bearing Cone 128604 Plain Half Case Industry # 42362
134332 Bearing Cup 015092 Plain Half Case Industry # 42584

Note: Some “New” bearing parts listed above are listed multiple times to illustrate how they are matched together. Bearing parts are
used and matched differently depending on specific models.

Spicer Service Parts  Dana Holding Corporation  www.spicerparts.com  www.dana.com

Page 2 of 3