Spicer HAXL-PNI-17 User Manual
®
®
GENUINE SPICER
BEARING CUP & CONE
CHANGES IN D170/D190 FAMILY AXLES
PART NUMBER INFORMATION
DATE: 1/10/2013 - REVISED
HAXL-PNI-17
TO: All Dana Aftermarket Group Spicer
Affected Models: D/R170, D/R190, D/R590, S170, S190, S590
In order to meet more demanding application and performance expectations, Dana is pleased to
announce a product design change in the models listed above. Dana began implementing the use of the
new design, case hardened carrier’s bearings in production axles in February 2012.
The change to new bearings will impact service kits in a variety of ways. The part number changes have
been outlined below to minimize any potential mixing of bearing parts from different suppliers.
•
Bearings are manufactured and used in sets to maximize full life of the product
• NOT using SPECIFIED bearings in Dana carriers can create potential noise issues or lead to premature
bearing failures and affect the warranty of product
• Mixing of bearing cups and cones can create potential noise issues or lead to premature bearing failures
• New and Old bearing cones and cups are manufactured by different suppliers
• Superseding OLD individual part numbers directly to the NEW individual part numbers could lead to mixing
of parts that could lead to potential failures. DO NOT MIX CONES AND CUPS MANUFACURED BY
DIFFERENT SUPPLIERS
• Spicer® service kit contents will always contain mating cones and cups
Heavy Axle Customers
SPICER® GENUINE BEARING KITS:
o Service kit bill of material changes will be done on a running basis.
o The bill of materials will begin changing in late May 2012.
Dana Part-No. Description Model Ratios
514011 Bearing Kit D170D all ratios
514012 Bearing Kit D190, D190D, D590, D590D all ratios
514238 Bearing Kit D170 all ratios
514013 Bearing Kit R170, S170 ratios 2.69-3.91
514014 Bearing Kit R170, S170 ratios 4.10-7.17
514015 Bearing Kit R170D, S170D ratios 2.53-3.91
514015 Bearing Kit R190, R190D, S190, S190D ratios 2.53-4.78
514016 Bearing Kit R190, R190D, S190, S190D ratios 5.25-7.83
514240 Bearing Kit R170D, S170D ratios 4.10-7.17
Spicer Service Parts Dana Holding Corporation www.spicerparts.com www.dana.com
1 of 3
y
y
INDIVIDUAL BEARINGS:
o Individual bearings cones and cups are sold separately thru service.
o Always use and install as matched sets, as noted below.
o When stock of the individual original bearing part numbers are exhausted, the part is No Longer
Available.
o Customers to reference the content of this bulletin and the chart below to help ensure bearing
cones/cups from the same supplier are purchased and used together.
Dana Part-No. Description Replaced By Bearing Parts Matched by Location
131050-nla Bearing Cone 139968 Pinion Bearing - Inner
131051-nla Bearing Cup 139969 Pinion Bearing - Inner/Outer
131052-nla Bearing Cone 139970 Pinion Bearing - Outer
131202-nla Bearing Cone 139971 Pinion Bearing - Outer
131203-nla Bearing Cup 139972 Pinion Bearing - Outer
131205-nla Bearing Cone 139973 Input Shaft Cone
131206-nla Bearing Cup 139974 Input Shaft Cup
131208-nla Bearing Cone 139975 Output Side Gear Cone
131209-nla Bearing Cup 139976 Output Side Gear Cup
131211-nla Bearing Cone 139977 Output Shaft Cone
139980-nla Bearing Cup 139978 Output Shaft Cup
INPUT ADJUSTER & CUP ASSY:
o Kits 514356 and 514357, that contain the Input Adjuster & Cup Assy., will be superseded by new
service kit part numbers, 504066 and 504067
o The new replacement kits will now contain the new Input Adjuster & Cup Assy’s and the matching
Input Bearing Cone.
Dana Part-No. Description Replacement Information
131205-nla Bearing Cone Replaced by new 139973
131685-nla Input Adjuster & Cup Assy Replaced by new 134354
514356-nla Kit – Input Adjuster & Cover D190 Replaced by new 504066
514357-nla Kit – Input Adjuster & Cover D170 Replaced by new 504067
Part-No 514356
Desc Kit - D190 Piloted I/P Cover
Part-No. Description Qty
131687 cover - diff carrier 1
131692 stud 1
131374 capscrew - hex 12
131693 nut - hex 1
131685 input adjuster & cup ass
Part-No 514357
Desc Kit - D170 Piloted I/P Cover
Part-No. Description Qty
131686 cover - diff carrier 1
131692 stud 1
131374 capscrew - hex 10
131693 nut - hex 1
131685 input adjuster & cup ass
1
1
Part-No 504066
Desc Kit - Cvr and Input Adjuster D190
Part-No. Description Qty
131687 cover - diff carrier 1
131692 stud 1
131374 capscrew - hex 12
131693 nut - hex 1
134354 input adjuster & cup assy 1
139973 brg cone 1
Part-No 504067
Desc Kit - Cvr and Input Adjuster D170
Part-No. Description Qty
131686 cover - diff carrier 1
131692 stud 1
131374 capscrew - hex 10
131693 nut - hex 1
134354 input adjuster & cup assy 1
139973 brg cone 1
Spicer Service Parts Dana Holding Corporation www.spicerparts.com www.dana.com
Page 2 of 3
Loading...