Page 1
Spicer® Light Vehicle
Product Guide
AFT-SP-LV-C002-0221
February 2021
Product Guide
Dana makes the same drivetrain components that are trusted by original
equipment manufacturers available to the aftermarket under the legendary
Spicer® brand. Prolong the life of your vehicles with top-tier Spicer products
from Dana Aftermarket, which adhere to rigid OE manufacturing specs for
performance and reliability, and are backed by Dana design, engineering,
testing, and manufacturing processes.
Product Information: SpicerParts.com | E-Catalog and parts locator: DanaAftermarket.com
Page 2
226mm
Axle Technology to Handle
Today’s High-Torque Engines
Only Dana delivers the technology and
performance of AdvanTEK® gearing.
AdvanTEK® technology offers improved strength and
efciency while reducing the overall size and weight of
the axle with lighter, higher-strength materials. Dana
axles with AdvanTEK® technology take it to the next
level with features like custom high-clearance housing
designed to optimize extreme off-road performance.
Tested. Proven. Trusted. Driven.
During fatigue tests, each gear is installed in a
production axle attached to a dyno, which then runs
until the gear fractures. The high-load test simulates a
loaded vehicle going uphill or carrying extra capacity
such as a trailer. The low-load test simulates everyday
driving at an accelerated rate.
Under high-load conditions, Spicer® ring and pinion
gears lasted an average of 121,080 cycles—nearly three
times as many cycles as the closest competitor. And
under low-load conditions, Spicer ring and pinion gears
performed more than twice as many cycles as the
competition!
220mm
Built with a smaller, more durable 220mm ring gear,
Spicer® AdvanTEK
handle even the most extreme off-road conditions.
®
gives enthusiasts the power to
CYCLE TESTING: COMPETITIVE GEARS (LOW LOAD)
500,000
468,400
400,000
Spicer Ring and Pinion gears
performed more than 2X better
than the closest competitor
195,720
33,720
Competitor A
COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017
Competitor B
Competitor C
196,680
Spicer Ring
and Pinion
Gears
Spicer
Part #2018747
300,000
200,000
100,000
CYCLE TESTING: COMPETITIVE GEARS (HIGH LOAD)
121,080
Spicer Ring and Pinion gears
performed nearly 3X better
than the closest competitor
36,200
3,640
Competitor A
COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017
Competitor C
Competitor B
41,880
Spicer Ring
and Pinion
Part #2018747
125,000
100,000
75,000
Gears
50,000
25,000
Spicer
RING GEAR CYCLES
RING GEAR CYCLES
Page 3
These products are only a sampling of all
the high-performance offerings from Dana
and Spicer. For information on additional
parts and applications, please visit
DanaAftermarket.com.
For complete part number and application
information, please refer to the Dana Axle
Model Guide, DTP-AMG, available at
www.SpicerParts.com/Literature.
1. Heat Treatment ensures optimal hardness in
Spicer’s top-quality steel, creating dispersion
throughout the part and holding back-face
runout to very tight tolerances.
2. Face Hobbing cuts gearing to precision
spacing between gear teeth, ensuring
continuous indexing so teeth are constantly
mated to signicantly reduce noise, vibration
and harshness.
3. Shot Peening shoots controlled microbeads
of steel at the root of the gear tooth, adding
compressive residual stresses into the root of
the tooth and doubling the fatigue life of the gear.
4. Lapping removes tool cutter marks from tooth
contact area, reducing noise and heat and
producing a better contact pattern.
These are the processes that differentiate
us from the competition. To learn what
makes a Spicer quality part, visit us on the
web at SpicerParts.com/WhatsTheDi.
DTP-AMG
1
1
Page 4
Spicer® Ring and Pinion Gearing
is Engineered for Longer Life
Spicer® ring and pinion gearing ensures performance that
non-genuine parts simply cannot deliver. Spicer gearing offers
the easiest possible set-up, a quieter ride and strength that can’t
be beaten. Reduce your downtime and cost with genuine Spicer
ring and pinion gearing.
• A special grade of steel delivers a more
consistent, higher quality product
• Precision-machined and
heat-treated for exceptional
durability and enhanced
lifespan
• Engineered to ensure
matched sets and
mating of the gears
RING AND PINION
Spicer Part # Ratio Axle Model Common Application
23721-5X 4.10 Dana 30 1971-1983 Jeep CJ5, 1976-1986 Jeep CJ7, 1966-1971 Ford Bronco
2008688-5 3.73 Dana 44 2007-2018 Jeep Wrangler (JK)
2002556-5
22106-5X 3.07 Dana 44 1987-2003 Jeep Wrangler
76088-5X 3.55 Dana 60 2014 and Down Ford E-Series
25538-5X 3.73 Dana 60 2014 and Down Ford E-Series
76047X 4.10 Dana 60 2014 and Down Ford E-Series
706033-8X 7.17 Dana 60 Various Dana 60/248 Applications
2013462 3.73 Dana Super 60 M256 2008-2014 Ford F-250/F-350 Super Duty
84674 4.10 Dana Super 60 M256 2008-2014 Ford F-250/F-350 Super Duty
84676 4.88 Dana Super 60 M256 2008-2014 Ford F-250/F-350 Super Duty
76568X 3.54 Dana 70 1995-2000 Dodge Ram 2500
84846-5 4.10 Dana 70 2003-2014 Ford E-350 Super Duty
2013538 4.56 Dana 70 2003-2010 Ford E-Series Super Duty
708127-2 4.56 Dana 70 2001-2010 Ford E-450 Super Duty
74375X 3.31 Dana 80 1999-2012 Ford F-Series Super Duty; 2003-2009 Chevy C4500
2013526 3.07 Dana 80 1999 to 2004 Ford Super Duty
2018597 3.73 Dana 80 1999-2012 Ford F-Series Super Duty; 2003-2009 Chevy C4500
708120-5 3.73 Dana 80 1990-2012 Ford F-Series Super Duty
708120-6 4.1 Dana 80 1990-2004 Ford F-Series Super Duty
80651 4.30 Dana 80 1999-2012 Ford F-Series Super Duty; 2003-2009 Chevy C4500
84002 4.88 Dana 80 1999-2012 Ford F-Series Super Duty; 2003-2009 Chevy C4500
3.36 Dana 44 2004-2015 Nissan Frontier/Titan, 2005-2015 Nissan Xterra
Inner Gear Kits
Genuine Spicer® inner gear kits are near-net
forged to original equipment specication, ensuring
greater strength and increased durability. You get
performance without the stress risers that come from
cutting gears with this easy repair solution, designed
specically for high-performance applications.
Spicer inner gear kits include the parts you need
to make your repair easy:
• Cross shaft with phosphate coating
• Thrust washers
• Diff gears
• Side gears
• Hardware
INNER GEAR KITS
Spicer Part # Ratio Axle Model Diff Type Spline
706043X 4.10 & Down Dana 60 Standard 30
2003857
706027X 3.73 & Down Dana 44 Standard 30
707321X
707435X 4.10 & Down Dana 60 Trac-Lok 35
2021290 4.10 & Down Dana 70 Powr-Lok 32
706010X Varies Dana 30 Standard 27
707185X 4.10 & Up Dana 80 Standard 37
10028814 Varies GM 8.5 Eaton-style Posi 30
2009155 3.21 - 4.10 Dana Super 44 Standard 30
708236 4.56 & Up Dana Super 60 Standard 35
708184 3.54 & Up Dana Super 35 Trac-Lok 27
2023889 Varies Chrysler 9.25 Standard 31
707063X Varies Dana 80 Standard 35
706844X 4.10 & Down Dana 60 Standard 35
2023882 Varies GM 8.875 12 Bolt Car Eaton-style Posi 30
2023880 Varies GM 9.5 Standard 33
2002914 Varies Dana 30 Standard 27
708204 3.73 & Down Dana 44 Trac-Lok 30
708077 4.56 & Down Dana 70 Standard 35
4.56 & Down Dana 70
4.10 & Up Dana 80
2.73 - 3.31 Dana 35
3.54 & Up Dana Super 35
Trac-Lok 35
Standard 27
2
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Page 5
Dierential Rebuild Kits for the
Right Repair
Spicer® differential rebuild kits save you money, downtime,
and aggravation by offering the parts you need when you
need them. Genuine Spicer differential rebuild kits include
all the latest production upgrades, so the parts you’re
installing are as good as or better than the part that
originally came with the vehicle.
DIFFERENTIAL REBUILD KITS FOR JEEP
Spicer Part #
Standard Master
10043619 10043620 Dana 30 Front
10040312 10040313 Dana 30 Front
10040451 10040452
2017366 2017378 Dana 44 Front
2017088 2017106 Dana 44 Front
2017086 2017102 Dana 44 Rear
2017086 2017109
1017087 2017103 Dana 44 Rear
1017087 2017110 Dana 44 Rear
10040477 10040478 Dana 44 AdvanTEK Rear
10040468 10040469 Dana 44 AdvanTEK Front
Axle Model Position Application
Jeep - 2000-01 Cherokee XJ,
1997-06 Wrangler TJ
Jeep - 2018-20 Wrangler (JL)
Dana 35 AdvanTEK Rear
Dana 44 Rear
Jeep - 2018-20 Wrangler (JL)
Jeep - 2007-18 Wrangler JK
Jeep - 2007-18 Wrangler JK
Jeep - 2007 Wrangler JK
Non-Rubicon
Jeep - 2008-18 Wrangler
JK Non-Rubicon
Jeep - 2007 Wrangler JK Rubicon
Jeep - 2008-18 Wrangler JK
Rubicon
Jeep - 2020 Gladiator,
2018-20 Wrangler (JL)
Jeep - 2020 Gladiator,
2018-20 Wrangler (JL)
DIFFERENTIAL REBUILD KITS
Spicer Part #
Standard Master
10038966 10038967 Chrysler/GM 11.5 AAM Rear Dodge/GM Trucks
10024023 10024024 Chrysler 9.25 Rear 1973-2000 Dodge, Chrysler & Plymouth Applications
10038937 10038938 Chrysler 9.25 Rear 2000-2011 Dodge & Chrysler Applications
10038964 10038965 Chrysler/GM 11.5 Front/Rear Dodge/GM Trucks
10043621 10043622 Dana 35 Rear Various Applications
10043629 10043630 Dana 44 Front/Rear Various Applications
2017590 2017592 Dana 60 Rear GM/Ford Full-size Vans
10055883 10055884 Dana M300 AdvanTEK Rear Ford - 2017-18 Super Duty
10024033 10024034 Ford 10.25 Rear Ford - 2000-03 F-150, 1985-99 F-250, 1985-99 F-350
10038954 10038955 Ford 10.5 Rear 1999-2007 E-250, E-350, F-250, F-350 & Excursion
10024027 10024028 Ford 8.8 Front/Rear Various Ford Applications
10024031 10024032 Ford 9.0 Rear Various Ford Applications
10038943 10038944 Ford 9.75 Rear Various Ford/Lincoln Trucks (3.00" Pinion Bearing)
10038945 10038946 Ford 9.75 Rear Various Ford Applications
10024049 10024050 GM 10.5 14 Bolt Rear 1973-1988 GM Trucks
10038958 10038959 GM 8.25 IFS Front 1999-2014 GM 1/2 Ton Trucks
10038956 10038957 GM 8.5˝ & 8.6˝ 10 Bolt Front/Rear 1999-2008 GM Applications
10024043 10024044 GM 8.5˝ & 8.6˝ 10 Bolt Front/Rear 1973-00 GM Applications
10038960 10038961 GM 8.875 12 Bolt Rear Various GM Trucks
10024045 10024046 GM 8.875 12 Bolt Rear Various GM Passenger Cars
Axle Model Position Application
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
3
Page 6
Strength and Durability for Longer
Life in Your Automotive Axle
Dana delivers a much more consistent and stronger axle
shaft due to heat treating and a slower quality scan rate.
Spicer® axle shafts are fatigue-tested to last, and our
axle parts are ultrasonically tested for any internal cracks
that regular magnetic testing can’t reach. The cold-formed rolled spline eliminates the need for machining,
which can cause stress fractures and premature failures.
AXLE SHAFTS
Spicer Complete Front Axle Assembly: Inner Shaft, Outer Stub, and Universal Joint
Spicer Part #
LEFT RIGHT
2014616-1 2014616-2 Dana 30 Jeep - 2007-18 Wrangler JK 1350 Series Upgrade
76813-1X 76812-1X Dana 44 Dodge - 1994-00 Ram 1500, 1994-98 Ram 2500
2014169-1 2014169-1 Dana 44 Jeep - 2007-18 Wrangler JK Upgraded Design
10025731 10025729 Dana 44 AdvanTEK Jeep - 2020 Gladiator, 2018-20 Wrangler JL Standard Diff
10027941 10027942 Dana 44 AdvanTEK Jeep - 2020 Gladiator, 2018-20 Wrangler JL Wide Track with ELD
10013781 10013778 Dana 60 Ford - 2005-12 Super Duty
76472X 76471X Dana 60 Dodge - 1994-99 Ram 2500, 1994-99 Ram 3500 Non-ABS
Axle Model Application Note(s)
Spicer Rear Axle Shaft Kit Assembly: Axle Shaft, Bolts, Seals, and Bearings
Spicer Part #
LEFT RIGHT
73624-2X 73624-1X Dana 35 Jeep - 1990-01 Cherokee, 1990-02 Wrangler 27 Spline
10043051 10043051 Dana 35 AdvanTEK Jeep - 2018-20 Wrangler JL Chromoly Upgrade
2004449-1 2004449-1 Dana 44 Jeep - 2007-18 Wrangler JK Non-Rubicon Models
2004785-2 2004785-3 Dana 44 Jeep - 2007-18 Wrangler JK Rubicon Models
84776-1 84776-1 Dana 44
2005994-1 2005994-1 Dana 44 Nissan - 2007-15 Titan Exc. ELD
10043059 10043059 Dana 44 AdvanTEK Jeep - 2018-20 Wrangler JL Chromoly, Open/Trac-Lok
10043168 10043169 Dana 44 AdvanTEK Jeep - 2020 Gladiator, 2018-20 Wrangler JL
76002-2X 76002-1X Dana 60 Ford - 2005-14 E-series
43811-7 43811-4 Dana 70 Ford - 1999-10 E-350 Series 32 Spline
47852-1 47852-1 Dana 80 Ford - 1994-97 F-350, 1999-08 F-450 Super Duty
45553-3 45553-3 Dana 80 Dodge - 1994-98 Ram 2500, 1994-98 Ram 3500 35 Spline
Spicer
Part #
74917X Front Outer Dana 44 Dodge - 1994-01 Ram 1500, 1994-97 Dodge Ram 2500
2002692 Front Outer Dana 60 Ford - 1998-04 Super Duty Single Rear Wheels
45531 Front Inner Dana 60 Dodge - 1994-99 Ram 2500, 1994-99 Ram 3500
53217 Front Outer Dana 60 Ford - 2005-12 Super Duty Monobeam Susp.
Location Axle Model Application Note(s)
Axle Model Application Note(s)
Nissan - 2004-07 Titan, 2003-07 Pathfinder, 2005-07
Armada
Misc. Shafts
Exc. ELD
Chromoly, Wide Track
with ELD
4
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Page 7
A Complete Ball Joint Repair Solution in One Kit
Spicer® ball joint service kits help you make repairs
quickly and easily. And because Spicer ball joint
service kits are engineered to meet original equipment
specications, you can rest assured that the repairs you
make will stand up to heavy use.
Spicer ball joint service kits contain all the parts you need
for repair, including:
• Ball joints
• Wheel seals
• Dust seals
• Vacuum o-rings
When upgrading to larger wheels and tires, a heavy-duty
ball joint ensures that wheel alignment stays true. It also
reduces the chance of experiencing a rapid oscillating in
the steering components that results in a harsh shaking
of the steering wheel.
A heavy-duty Spicer Performance ball joint will help
ensure that owners get all the quality and performance
they demand from their bigger, beeer wheels and
tires. These ball joints deliver peace of mind off-road
with metal-on-metal construction. The results-driven
design includes a grease zerk for extended life and
serviceability.
BALL JOINT KITS FOR JEEP
Spicer Part # Axle Model Position Application
706944X Dana 30 Upper/Lower Various Jeeps - TJ/WJ/XJ/ZJ
2007354 Dana 44 Upper/Lower Jeep - 2007-18 Wrangler JK
707488X Dana 30 Upper/Lower Jeep - 1999-04 Grand Cherokee
10048946
Dana 30/Dana
44 AdvanTEK
Upper/Lower
Jeep - 2020 Gladiator, 2018-20
Wrangler JL
BALL JOINT KITS
Spicer Part # Axle Model Position Application
700238-2X Dana 50/60 Upper/Lower Ford - 1999-04 Super Duty
2001257 Dana 50/60 Upper Various Ford Trucks 1978-12
2001258 Dana 50/60 Lower Various Ford Trucks 1978-12
2020314 Dana 60 Upper/Lower Ford - 1999-04 Super Duty
708238
706116X Dana 44 Upper/Lower Various Applications
40112 Dana 44 Upper Various Applications
40113 Dana 44 Lower Various Applications
2016801 Dana 60 Upper/Lower Ford - 2005-15 Super Duty
707469X Dana 60 Upper/Lower
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Dana 60 Upper/Lower
Ford - 2004-11 F-250 Super Duty,
Jeep - 2007-18 Wrangler JK
Dodge - 1994-98 Ram 2500,
1994-98 Ram 3500
5
Page 8
Spicer® Dierential Covers
are Tougher than the Terrain
Differentials are engineered from some pretty intricate
components, and nothing keeps everything protected
like genuine Spicer differential covers. Whether a
vehicle is built for speed or heading off-road, Spicer
diff covers keep gearing safe and protect the overall
investment.
Spicer offers a selection of genuine standard OE diff
covers and aluminum nned diff covers, and full-
performance diff covers that are engineered with the
serious off-roader in mind. Don’t trust a knock-off
to protect those complex diff parts. Count on the
legendary Spicer brand.
DIFFERENTIAL COVERS FOR JEEP
Spicer Part # Axle Model Position Material Application
42960-1 Dana 44 Rear Steel Jeep - 2007-18 Wrangler JK
74208X Dana 35 Rear Steel Various Jeep Applications
10023535 Dana 35 Rear Nodular Iron Various Jeep Applications
DIFFERENTIAL COVERS
Spicer Part # Axle Model Position Material Application
2011159 Dana 60 Rear Steel Ford - 1997-01 E-series
2006504-1 Dana 60 Rear Steel Ford - 2002-07 E-series
707233X Dana 60 Front/Rear Steel
42434 Dana 80 Rear Steel Various Applications
707231X Dana 80 Rear Steel Various Applications
42815-2 Dana 70 Rear Steel Ford - 2000-12 E-350
707105-1X Dana 70 Rear Steel Various Applications
706112X Dana 44 Front Steel GM - 1978-80 K-series Blazer
2014220 Dana 60/61 Front/Rear Steel Dodge W-series & Ford E-series
707014X Dana 44 Front/Rear Steel Various Applications
10024090 Dana 60 Rear Nodular Iron
10023539 Ford 9.75 Rear Nodular Iron Various Ford Applications
10023536 Dana 44 Front/Rear Nodular Iron Various Applications
10023537 Dana 80 Rear Nodular Iron Various Applications
10023538 Ford 8.8 Rear Nodular Iron Various Ford Applications
10023534 Dana 30 Front Nodular Iron Various Applications
2015251 Dana 80 Rear Cast Aluminum Various Ford Super Duty Applications
2016951 Dana 44 Rear Cast Aluminum Various Nissan Applications
2013834 Dana 80 Rear Cast Aluminum Various Applications
Ford - 1988-98 F-350, GM - 1983-86
G-series Van
Ford - 2000-14 Super Duty, Jeep -
2007-18 Wrangler JK
6
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Page 9
Performance Di Gaskets:
Easily Installed and Instantly Sealed
Tired of using paper differential gaskets? Spicer® has
the solution. These gaskets integrate high-performance
materials with precision designs, so they can stand up to
even the most extreme conditions.
• High-performance gaskets for maximum durability
• Provide an easy repair
• Anti-stick coating on the outside
• Woven steel core at the center
• Does not require RTV or other silicone-based sealant
• Reusable for added convenience
DIFFERENTIAL GASKETS FOR DANA AXLES
Spicer Part # Dana Axle Model
34685 Dana 44
34687 Dana 60/61/70
34684 Dana 30
RD52000 Dana 44
RD51997 Dana 80
RD52001 Dana 30
RD51999 Dana 60/61
RD51998 Dana 70
DIFFERENTIAL GASKETS
Spicer Part # Axle Model
RD52004 Ford 9.0
RD51995 GM 10.5 14 Bolt
RD52003 Ford 9.75
RD52005 Ford 8.8
RD52002 Ford 10.25/10.5
RD51996 GM 8.875 12 Bolt Passenger Car
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
7
Page 10
Lighter Weight Aluminum Driveshaft
Products for Enhanced Driveline Performance.
Whether you are driving outside the lines or between them, demand the performance that comes from
genuine Spicer® quality aluminum driveshaft products. Because Spicer parts are manufactured to the
same standards as original equipment parts, you can count on them to meet or exceed OE performance.
• Specically designed to meet the needs of your car, truck, or SUV
• Engineered to reduce overall weight and rotating mass
• Built to minimize noise, vibration, and harshness (NVH)
• Delivers improved driving performance
ALUMINUM TUBING
Dana Part Number OD ID Wall Length
212009X-1742M 5" 4.875" 0.075 1742 MM
212009X-1937M 5" 4.875" 0.075 1937 MM
212034X-1548M 5" 4.875" 0.083 1548 MM
212034X-1623M 5" 4.875" 0.083 1623 MM
5002511-1540M 4.375" 4.2" 0.083 1540 MM
5002511-1679M 4.375" 4.2" 0.083 1679 MM
212247X-1580M
212247X-1712M 4" 3.83" 0.075 1712 MM
5005665-1526M 4" 3.83" 0.083 1526 MM
32-38-12-1640M 4" 3.83" 0.083 1640 MM
4" 3.83" 0.075 1580 MM
ALUMINUM TUBE YOKES
Dana Part Number
3-28-03535 1410 4" x .083" 3.8" OSR 2.1"
3-28-1307 1350 4" x .083" 3.8" OSR 2.4"
2-28-16881 1330 4" x .083" 3.8" OSR 2.2"
2-28-16882 1330 4" x .083" 3.8" OSR 2.2"
2-28-3327 1330 4" x .083" 3.8" OSR 2.4"
2-28-3377 1330 4" x .083" 3.8" OSR 3.1"
U-Joint
Series
Fits Tube
Diameter
Butt
Diameter
U-Joint
Snap Ring
C/L to Weld
POPULAR COMPLETE DRIVESHAFTS
Dana Part Number
5001657-1862M 1410 5.78" .083" 87.95" 31/32 Various Applications
5001719-1623M 1410 5" .083" 70.47" 30/31 Various GM Vehicles
5001719-1743M 1410 5" .083" 83.5" 30/31 Various GM Vehicles
5001241-1934M 1330 5" .075" 89.1" 26/27 Various Applications
5003201-1742M 1410 5" .075" 83.2" 31/32 Various GM Vehicles
923835-1712M 1330 5" .075" 78.8" 26/27 Various Applications
922878-1617M 1350 5" .075" 78.8" 26/27 International-Navistar
923418-1604M 1330 4" .075" 68" 31/32 Various Applications
923419-1604M 1350 4" .075" 75.7" 31/32 Various Applications
922300-6530 1330 5" .075" 78.8" 26/27 Various GM Vehicles
U-Joint
Series
Tube
Diameter
Tube Wall
Driveshaft
Length
Transmission Slip
Yoke Spline
Application
8
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Page 11
Dana is Your Partner
in Last Mile Delivery
The trend in last mile delivery is driving an increase in
light and medium-duty van platforms. As these delivery
vehicles travel local and regional delivery routes,
extended idling periods and stop-and-go driving styles
place a strain on engine and driveline components.
These stresses will ultimately increase service frequency,
putting you in a position to grow your business—
especially if you select the right parts for the job.
Spicer® Dura-Tune®
Self-Aligning Center Bearing
Engineered for durability, and tuned
to provide industry-leading powertrain
vibration isolation and dampening.
Spicer® and
Spicer Select™ U-Joints
These u-joints are designed
and engineered to standards
you can trust, for vehicles at
any stage in their lifespan.
Spicer® Front and Rear Driveshafts for the
Mercedes-Benz®/RAM® Promaster Sprinter
Designed, engineered, and manufactured by
Dana to serve as a virtually maintenance
-free aftermarket solution.
Spicer® King Pin Kits
Our kits are the result of years of
engineering and testing; they are
manufactured with precision to
accommodate your installation
preferences and deliver
a signicant performance
advantage.
Spicer® Carriers
Spicer medium-duty and
heavy-duty carriers are built
with 100% Spicer parts, with
premium gearing, bearings,
and oil seals in every unit.
Spicer® Axle Overhaul Kits and Bearing Kits
Keep your delivery vehicles working for you
with genuine Spicer repair kits; they come with
everything you need, such as the highest quality
mix of bearings, cups, and cones; premium oil
seals; and all the small parts to do the job right.
DELIVER TO THE
LAST MILE
9
Page 12
Spicer Select™ All-Makes
Drivetrain Products
As vehicles age, your product choices may change.
Spicer Select all-makes drivetrain parts by Dana are
built for older vehicles that still have an important
job to do.
The Spicer Select solution is simple: To provide
quality-built all-makes parts that are backed by
the Dana name you know and trust. Parts that are
designed for exceptional t and easy installation
to maximize uptime.
For the lifespan of your vehicles, choose parts
you can trust that will keep vehicles condently in
service. Choose Spicer Select all-makes drivetrain
parts by Dana.
Center Bearings
that are Proven to Last
With Spicer Select center bearings for light vehicles, you
get quality aftermarket grade bearings that are proven to last,
with brackets made from quality steel. They feature proper
rubber hardness for your application, ensuring a smooth and
quiet ride.
Coverage includes
high VIO applications
like 99-07 Chevy
Silverado, and eet
managed last mile
delivery applications
like the Dodge/
Mercedes Sprinter.
POPULAR LIGHT VEHICLE CENTER BEARINGS
Spicer Select Part # Dimensions Applications
25-212030-1X 1.574 I.D. 6.62 CL/CL
25-210088-1X 1.378 I.D. 6.62 CL/CL 2006-2001 GMC Sierra 2500 HD
25-211750-1X
25-32039X 1.574 I.D. 6.62 CL/CL 2005-2003 Dodge Ram 2500/3500
25-210391-1X 1.574 I.D. 7.62 CL/CL 1980's GMC C5000/C6000/C7000
25-211848-1X 1.574 I.D. 3.25 CL/CL 2002-1995 Dodge Ram 2500/3500
25-211175X 1.378 I.D. 6.62 CL/CL
25-210873-1X 1.574 I.D. 6.62 CL/CL Ford F700/GMC P3500
25-212028-1X 1.574 I.D. 6.62 CL/CL 2007-1999 GM 2500/3500 pickup
25-210866-1X 1.574 I.D. 6.62 CL/CL
25-210084-2X 1.771 I.D. 7.62 CL/CL 1997 and Down GM 6500/7500
25-210121-1X 1.968 I.D. 7.62 CL/CL 1710 Series Driveshafts
25-210875-1X 2.362 I.D 8.62 CL/CL 1760/1810 Series Driveshafts
25-210661-1X 2.362 I.D 8.62 CL/CL 1810 Series Driveshafts
25-5003323 2.362 I.D. 8.62 CL/CL 1810 Series Driveshafts
1.181 I.D. 5.91 CL/CL 2004-2000 Toyota Tundra
2008-1996 GM 2500/3500
Truck and Van
2003-1999 Ford
F-250/F-350 Super Duty
1999 and Down Ford F-250/F-350,
2002-1995 GM 6500/7500
10
ENGINEERED
BY DANA
For more information on Spicer products, visit SpicerParts.com. For our e-catalog and parts locator, visit DanaAftermarket.com.
Page 13
Spicer Select U-Joints.
Second Only to Our First Line OE.
Designed to Handle the Demands
of Commercial Applications
Backed by the Dana design and engineering standards you trust,
Spicer Select u-joints ensure your customers only come back
satised. These warrantied u-joints are designed for maximum
uptime throughout the nish of a vehicle’s lifespan.
POPULAR LIGHT VEHICLE U-JOINTS
Spicer
Select Part#
Spicer #
SPL #
(Non-Greaseable)
SPL #
(Greaseable)
Series Greaseable
25-153X 5-153X 5-1310X 5-1310-1X 1310 Y OSR
25-160X 5-160X 5-1410X 5-1410-1X 1410 Y OSR
25-178X 5-178X 5-1350X 5-1350-1X 1350 Y OSR
25-213X 5-213X 5-1330X 5-1330-1X 1330 Y OSR
25-3147X 5-3147X 5-795X - S44 Y ISR
25-760X 5-3226X** 5-760X - 1310WJ N ISR
25-332X - SPL55-3X SPL55-4X 1480WJ Y ISR
25-188X 5-188X SPL55X SPL55-1X 1480 Y OSR
25-212X 5-212X 5-793X -
25-3022-1X 5-3022-1X - -
25-134X 5-134X - -
S44 to
1330
S44 to
1310
1310 to
1330
Y OSR/ISR
Y OSR/ISR
Y OSR
25-260X 5-260X - - 1310 N ISR
25-3207X 5-3207X* - - 1415 Y OSR
25-789X 5-3228X 5-789X - 7260 Y ISR
25-3206X 5-3206X* - - 1485 Y OSR
25-648X 5-648X - -
1330 to
1350
Y OSR
**Geaseable / *Non-Greaseable
BEARING PLATE STYLE
Spicer Select Part # Series Greaseable
25-279X 1610 Series Y
25-280X 1710 Series Y
25-407X 1760 Series Y
25-281X 1810 Series Y
HALF ROUND STYLE
Spicer Select Part # Series Greaseable
25-674X 1610 Y
25-675X 1710 Y
25-677X 1760 Y
25-676X 1810 Y
Snap
Ring
Style
Spicer Select all-makes u-joints performed more than
2X better than the closest competitive OE product
offering. In fact, Spicer Select tested second only to
Spicer Genuine.
B10 FATIGUE TESTING: 1310 U-JOINTS
Spicer® Select™ 1310
all-makes u-joints outperform
the closest competitive OE
offering, and second only to
Spicer Genuine.
28,784
Competitor A Competitor B
U-JOINT KIT TEST RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2016
30,544
57,333
Competitor C
68,753
Spicer® Select
B10 FATIGUE TESTING: 1330 U-JOINTS
Spicer® Select™ 1330 all-makes
u-joints outperformed the
competitive aftermarket offerings.
80,749
54,059
Competitor A Competitor B
U-JOINT KIT TEST RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2016
88,908
Competitor C
93,686
Spicer® Select
B10 FATIGUE TESTING: 1810 U-JOINTS
Spicer® Select™ 1810
all-makes u-joints performed
more than 2x better than the closest
competitive OE offerings, and
second only to Spicer
U-JOINT KIT TEST RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2016
®
Genuine.
14,083
Competitor A
35,052
Competitor B
37,734
Spicer® Select
80,000
60,000
40,000
FATIGUE CYCLES
20,000
0
™
95,000
75,000
55,000
FATIGUE CYCLES
35,000
0
™
40,000
30,000
20,000
FATIGUE CYCLES
10,000
0
™
SPL
Spicer Select Part # Series Greaseable
25-SPL170-4X SPL170 Y
25-SPL250-3X SPL250 Y
RPL
Spicer Select Part # Series Greaseable
35-RPL20X RPL20 N
35-RPL25X RPL25 N
Standard u-joints help provide long life and deliver exceptional
performance. Service-free u-joints are permanently lubricated and
sealed to provide reduced maintenance time and cost, promote
ease of service, and extend u-joint life.
11
Page 14
Product Information: SpicerParts.com | E-Catalog and parts locator: DanaAftermarket.com
Dana Aftermarket Group
PO Box 1000 Maumee, Ohio 43537
Warehouse Distributors: 1.800.621.8084
OE Dealers: 1.877.777.5360
Follow SpicerParts
© 2021 Dana Limited. All rights reserved. AFT-SP-LV-C002-0221
Loading...