Page 1
SERVICE PARTS INFO
DATE:
30
/10/20
1
7
TO:
All Dana Aftermarket Group Heavy Axle Customers.
DA052017
ADB22X DISC BRAKE WHEEL SEALS
PART NUMBER INFORMATION
Change of Wheel Seals for the Spicer / Bendix ADB22X Disc Brake.
Dana Aftermarket Group is pleased to announce the release of new wheel seals for the Spicer / Bendix
ADB22X Disc Brakes fitted to both Dana Drive and Steer axles.
The original seals have been discontinued and superseded directly by the part numbers in the chart below.
The chart below also includes the new hub and rotor assemblies fitted with the Conmet Wheel Seal.
New Dana
Part-No
Replaces
Description
Discontinued
Item
10081518 Wheel Seal & Spacer Kit to suit FF (Dana E Series) Steer Axles 10005430
10081519 Wheel Seal & Spacer Kit to suit FL (Dana D Series) Steer Axles 43761
10081520 Wheel Seal & Spacer Kit to suit R Drive Axles 10005431
10083005 Hub & Rotor FF Front PreSet CI 285 ABS 2.50" Stud with Conmet Seal 10025687
10083011 Hub & Rotor FL Front Preset CI 285 ABS 2.56" Stud with Conmet Seal 10025642
10082993 Hub & Rotor FF Front Preset AL 285 ABS 2.59" Stud with Conmet Seal 10025564
10084418 Hub & Rotor R Drive Preset AL 285 ABS 3.27" Stud with Conmet Seal 10025558
Individual wheel seals are no longer available and are now available as a seal and spacer kit.
Note: Spacers SHOULD NOT be reused, and must be replaced with new when fitting a new wheel seal.
Current Literature can be downloaded from www.spicerparts.com or at www.dana.com.au Click on the
literature button or the EXPERT ® icon, and navigate to the literature needed.
Should you have any queries on the above or require further information please contact Dana Australia on
1300 00 DANA
Spicer® Service Parts Dana Holding Corporation www.spicerparts.com www.dana.com
Loading...