Spicer
®
Steer Axles
P/N: SHAIS184B
Knuckle Cap O-Ring 816294 No Longer available
Affected Models: E-1200I, E-1460I
Some original or early design production steer axles used an o-ring (816294) under the knuckle cap.
The o-ring does not need to be replaced when doing reassembly or using replacement knuckle caps.
Some kits in the field still may contain the o-ring – simply discard it.
THE FOLLOWING PART HAS BEEN REMOVED FROM SERVICE KITS AND IS NO LONGER
AVAILABLE.
•
DANA PART 816294 – O-RING
For specifications or service assistance call 1-877-777-5360 or visit www.spicerparts.com. The Dana Service Manual for
the above models is AXSM0038. It can be found on line under the Steer Axle literature section.
Copyright Dana Limited, 2013 Dana Aftermarket Group
SHAIS184B FEB 2013 All Rights Reserved. P.O. Box 321
Printed in U.S.A. Dana Limited Toledo, OH 43697-0321
1