Easy Flash Module 3.0
EASY FLASH MODULE 3.0
USER MANUAL
Speed Turtle Engineering LLC
Internet: www.speedturtleengineering.com
Customer Support: support@speedturtleengineering.com
Easy Flash Module 3.0 User Manual
EFM 3.0 V1.2 Speed Turtle Engineering LLC Page | 1
IMPORTANT NOTES!
Before the installation and use of the Easy Flash Module 3.0 (EFM 3.0), thoroughly
read and understand the module features and instructions contained in this manual!
The use of a flashing vehicle light system may be regulated by state, county, or
municipal authorities. It is the responsibility of the end user to know and comply
with these regulations.
The installation of the EFM 3.0 will modify the vehicle’s electronic communication
system. This modification may affect the warranty of your vehicle. It is the
responsibility of the end user to verify the warranty conditions with the vehicle
manufacturer. The use of the EFM 3.0 may shorten the life of the vehicle’s light
bulbs, headlight assemblies, and electronic modules.
Professional installation is recommended.
Easy Flash Module 3.0 User Manual
EFM 3.0 V1.2 Speed Turtle Engineering LLC Page | 2
Preface ....................................................................................................................................................3
General Operation ..................................................................................................................................3
Supported Vehicles ..................................................................................................................................4
Easy Flash Module 3.0 Overview .............................................................................................................4
Module Layout ....................................................................................................................................4
Installation ..............................................................................................................................................5
Module Activation ...............................................................................................................................6
Active Modes .......................................................................................................................................7
Pattern Selection .................................................................................................................................8
Individual Lamp Configuration ............................................................................................................8
Dash Indicator .....................................................................................................................................8
Module Overrides ................................................................................................................................9
Updating Module Software .................................................................................................................9
Status LED Mode .................................................................................................................................9
Troubleshooting ................................................................................................................................... 10
Easy Flash Module 3.0 User Manual
EFM 3.0 V1.2 Speed Turtle Engineering LLC Page | 3
Preface
This manual describes the features and operation of the Easy Flash Module 3.0 (EFM 3.0)
with software version V3.03. Speed Turtle Engineering recommends you always run the latest
available EFM 3.0 software. The latest software is available for download at
SpeedTurtleEngineering.com. To check and update your module software version, use the STE
Configuration Utility program.
General Operation
The EFM 3.0 provides a simple and effective way to flash the factory exterior lights of
supported vehicles. The system is easily installed in minutes and is a true plug and play solution. If
equipped and supported, the module will flash the following lights:
- Front Low Beams
- Front High Beams
- Front Turn Signals
- Front Fog Lamps
- Front LED Accents
- Rear Turn Signals
- Rear Stop Lamps
- Third / Center Mounted Brake Lamp
- Reverse Lamps
- Pickup Bed Lamp
Unlike other solutions, the EFM 3.0 does not require any cutting or splicing of the vehicle’s
wiring harness. This allows the module to be easily installed by anyone in minutes. The plug and play
installation also allow the module to be removed and installed in another vehicle without repairing
or replacing vehicle components.
Loading...