ENERGY STAR® Qualified
U.S. DOE Compliant for
Water and Energy Standards
ADA Compliant
Ultra High Efficient With
High Speed Extract and
Low Water Consumption
MULTI-HOUSING
Front Load Washer
Front Control - Pump Drain
RELIABLE COMMERCIAL PRODUCTS
Large Door Opening
With Heavy-Duty
10" (25.4 cm) Piano Hinge
Prep for Card
(“Y”)
Multi-Compartment
Supply Dispenser
Prep for Coin
(“X”)
Durable Stainless Steel Washtub
High Speed Extract of 1000 RPM
Spins Clothes Out Drier
Energy Efficient Wash Cycles
Door Swing 180º
Coin
(“C”)
QUANTUM FRONT LOAD WASHER SPECIFICATIONS
Activation
Pump Drain
SFNLYFSP
111TW01
Prep Card
“Y”
SFNLYFJP
111TW01
Prep Card
“Y”
SFNLXFSP
111TW01
Prep Coin
“X”
SFNLCFSP
111TW01
Coin
“C”
SFNNCFSP
111TW01
Coin
“C”
SFNLCFJP
111TW01
Coin
“C”
Appearance
Color - White √ √ √ √ √ √
Control Panel Selection Front Front Front Front Front Front
Water and Energy Info
Modified Energy Factor (MEF) - liters/kWh/cycle 2.24 63.4) 2.24 (63.4) 2.24 (63.4) 2.24 (63.4) 2.46 (69.8) 2.24 (63.4)
Water Factor (WF) - liters/liter/cycle 4.5 (0.6) 4.5 (0.6) 4.5 (0.6) 4.5 (0.6) 3.83 (0.51) 4.5 (0.6)
Water Consumption - gal (liters per cycle) 12.8 (48.5) 12.8 (48.5) 12.8 (48.5) 12.8 (48.5) 10.9 (41.3) 12.8 (48.5)
Average Hot Water - gas (liters) 1.59 (6.0) 1.59 (6.0) 1.59 (6.0) 1.59 (6.0) 0.9 (3.4) 1.59 (6.0)
CEE Tier Level 2 2 2 2 3 2
EcoWatersaver™ √ √ √ √
Technical Info
Weight - lb (kg) 250 (113) √ √ √ √ √ √
Shipping Weight - lb (kg) 270 (123) √ √ √ √ √ √
Electrical Requirements - 120/60/1 15 amp √ √ √ √ √ √
Overall Dimensions - WxDxH in (mm)
26 7/8” (683) x 28” (711) x 43” (1092)
√ √ √ √ √ √
Stainless Steel Basket Volume - cu. ft. (liters) 2.84 (80) √ √ √ √ √ √
Cycle/Temp - Normal, Perm Press, Delicate/Hot, Warm, Cold √ √ √ √ √ √
Motor 1 HP 750 W √ √ √ √ √ √
Water Pressure psi (Bar) Pressure Fill
20 to 120 psi
1.4/8.3 √ √ √ √ √ √
Spin Speeds - RPM 500, 650, 1000 √ √ √ √ √ √
Soil Level Modifiers √ √ √ √ √ √
Supply Injection √ √
Drain Pump Pump Pump Pump Pump Pump
Performance/Features
Secured Automated Audits √ √ √ √ √ √
Safe Door Lock Release at Cycle Completion
Automotive Size Shocks Enable Installation on Any Floor Type or
Level
Agency Approval
cULus
√ √ √ √ √ √
√ √ √ √ √ √
For the most accurate
information, the installation
guide should be used for
all design and construction
purposes. Due to continuous
product improvements, design
and specifications subject to
change without notice. The
quality management system
of Alliance Laundry Systems’
Ripon facility has been
registered to ISO9001:2008.
Manufactured in Ripon, WI
since 1908
© 2011 Alliance Laundry Systems LLC AM11-0740
Speed Queen | 800-345-3649 | www.speedqueen.com/route