Industry’s Largest Door
Opening 2.06 sq. ft. (1914 cm²)
MULTI-HOUSING
Quiet, Efficient Blower System
End-of-Cycle Signal
Control Options Enable User
Cycles to Fit Needs
Single Load Dryer
Front Control Stainless Steel
Durable
Galvanized Steel
Cylinder
Prep for Card
(“Y”)
Coin
(“C”)
RELIABLE COMMERCIAL PRODUCTS
Upfront Lint Filter
Easy to Clean and
Secured
High Efficiency Exhaust Blower
With Superior Airflow of 220 cfm
(105 liters/sec)
100% Serviceable From the Front
Space-Saving Narrow Cabinet
26-7/8" (683 mm)
Secured Automated Audits
QUANTUM SINGLE LOAD DRYER SPECIFICATIONS
Elec (“E”)
Gas (“G”)
Activation
SDELYFGW171TN01
SDGLYFGW111TN01
Prep Card
“Y”
SDELCFGW171TN01
SDGLCFGW111TN01
Coin
(“C”)
Appearance
Cabinet - Stainless √ √
Door - Window √ √
Control Panel Selection Front Front
Technical Info
Cylinder Volume - cu. ft. (liters) 7.0 (198) Galvanized Galvanized
Cycle Temp - High 160º, Med 155º, Low 145º, Delicate 115º √ √
Motor 1/3 HP, 5.5 amps √ √
Weight - lb (kg)
Shipping Weight - lb (kg)
Electrical Requirements
Overall Dimensions WxDxH: mm (in)
26 7/8” (683) x 28” (711) x 43” (1092)
Type of Gas (Gas Models Only) Factory-Equipped
Natural/Mixed Gas**
Air Outlet Diameter - in (mm)
Elec 150 (68) √ √
Gas 155 (70) √ √
Elec 160 (73) √ √
Gas 165 (75) √ √
Elec 120/240/60/1-30 amp * √ √
Gas 120/60/1-15 amp √ √
√ √
√ √
4” (102) √ √
Exhaust Airflow - cfm (liters/sec) 220 (105) √ √
Heating Element
Elec 5350W, 240V √ √
Gas 25,000 Btu √ √
Utility Connections - in (mm): Gas 3/8” (NPT 9.5) √ √
Performance/Features
Cycle Status Indicators √ √
Touch Pad Control with Sound Annunciator √ √
Agency Approval
* Electric dryers come equipped for 120/240/60/1 operation. They can be field converted to operate on 120/208/60/1 with optional 61928 conversion kit.
** Gas dryers can be field converted for operation on LP gas with optional 458P3 conversion kit.
Elec cULus
CSA
Gas c
us
√ √
√ √
For the most accurate
information, the installation
guide should be used
for all design and
construction purposes.
Due to continuous product
improvements, design and
specifications subject to
change without notice.
The quality management
system of Alliance Laundry
Systems’ Ripon facility
has been registered to
ISO9001:2008.
Manufactured in Ripon, WI
since 1908
© 2011 Alliance Laundry Systems LLC AM11-0763
Speed Queen | 800-345-3649 | www.speedqueen.com/route