Speco N4WNSP4TB, N4WNSM9TB, N4WNSM3TB, N4WNS6TB, N8WNSP6TB Quick Setup Guide

...

Download

Page 1

Quick Setup Guide



Speco Technologies NS Series NVRs

Please go to www.specotech.com/software-updates.html for the latest software

Congratulations on purchasing your new NS NVR.

We hope that this Quick Setup Guide will help you quickly setup

Internal Connections

N4NS, N8NS, N16NS

EZ Network

(Internet Connected) EZ Network (Not Connected to the Internet)

and congure your new Speco Technologies NVR.

Thank you!

Product Components

NS Series

Remote Control Remote Battery 1.5V (AAA x 2EA)

Quick Setup Guide

Speco Technologies NS Series NVRs

Please go to www.specotech.com/software-updates.html for the latest software

Congratulations on purchasing your new NS NVR.

We hope that this Quick Setup Guide will help you quickly setup

and congure your new Speco Technologies NVR.

Thank you!

Product Components

NS Series

Remote Control Remote Battery 1.5V (AAA x 2EA)

Quick Setup Guide Quick User Guide

Mouse for D4RS / D8RS / D16RS

Software & Manual CD

Rack mounts ears (x 2EA) Screws (x 6EA)

Adaptors (DC12V 5A, DC48V 2A) & Power cables (110V or 220V)

Power on the DVR

• Please follow the proper power on procedures

to avoid damaging the NVR.

• Connect all necessary components, e.g. monitor and cameras,

before powering the NVR.

• Check the type of power source before connecting the power adaptor

to the NVR. Only use the power supply that is included with the unit.

• It is recommended that the Adaptors are connected to the

NVR before powering up unit.

Quick Setup Guide User Guide

Internal Connections

N4NS, N8NS, N16NS

6 7

N4NSP

567

N8NSP, N16NSP

6 7

1. Ground: Use for ground port.

2. PoE POWER: DC48V input. (NSP Models)

3. PoE PORTS: N4NSP (4 Port PoE), N8NSP & N16NSP (8 Port PoE)

4. ETHERNET PORT2: Secondary Network Terminal. (NS Series without PoE)

5. AUDIO IN/OUT: 4 Connectors for Audio Input / 1 Connector for Audio Output.

6. CVBS OUT: HDMI output port. Connector to the HDMI Monitor.

7. HDMI OUT: Main Video Output (1280x720, 1920x1080).

8. VGA OUT: Connector for VGA Monitor.

9. RS232C: POS Interface (TBD).

10. E-SATA: 1 External SATA Terminal.

11. USB PORT: USB Ports for Mouse or USB Flash Drive .

12. ETHERNET PORT1: RJ-45 Connector for Primary Network.

13. Audio 5~16: More audio inputs for N8NSP, N16NSP.

14. SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs; 1 alarm output and RS-485 for PTZ.

15. POWER: DC12V input for NVR.

EZ Setup

• To start the EZ Setup, right click on the mouse and select

EZ SETUP from the submenu.

• Enter username and password.

The default username is admin and password is 1111.

• It is strongly suggested to change the password to

prevent unauthorized access.

EZ Network

1210

1. Under EZ Setup, select EZ Network for Network Setup

2. Select YES if the NVR is using an internet connection.

3. Select Auto Conguration (DHCP) or Manual Conguration (STATIC) and then click TEST button. It will automatically setup the network setting for the system (NVR).

4. Setup DDNS setting. DDNS (Dynamic Domain Name System) allows a DNS name to be constantly synchronized with a dynamic IP address. It allows using a dynamic IP address to be associated with a static domain name. Refer to the full version manual for more information.

5.Click FINISH to save the setup.

(Internet Connected) EZ Network (Not Connected to the Internet)

1. Under EZ Setup, select EZ Network for Network Setup

2. Select NO if the NVR is not using an internet connection.

2. Select Auto Conguration Select (DHCP) or Manual Conguration (STATIC) and then click TEST button.

3. Select OFF for ENABLE DDNS and click NEXT button.

4. Click FINISH to save the setup.

EZ Camera

1. In the EZ Setup window, select EZ Camera for Date/Time and Camera Setup and click on NEXT.

2. e description about EZ Camera Setup procedure is then displayed.

3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and DATE & TIME.

4. Click on NEXT to enter the EZ Camera Setup.

5. Select the IP Camera VENDOR

6. Click on SCAN to search the network for cameras.

7. Once the IP Camera information is added for the channel, click on PREVIEW to verify video

8. Click OK and EZ Camera Setup has completed.

Rev. 5/21/13

N4NSP

N8NSP, N16NSP

1. Ground: Use for ground port.

2. PoE POWER: DC48V input. (NSP Models)

3. PoE PORTS: N4NSP (4 Port PoE), N8NSP & N16NSP (8 Port PoE)

4. ETHERNET PORT2: Secondary Network Terminal. (NS Series without PoE)

6 7

1210

1. Under EZ Setup, select EZ Network for Network Setup

2. Select NO if the NVR is not using an internet connection.

2. Select Auto Conguration Select (DHCP) or Manual Conguration (STATIC) and then click TEST button.

6 7

3. Select OFF for ENABLE DDNS and click NEXT button.

4. Click FINISH to save the setup.

EZ Camera

5. AUDIO IN/OUT: 4 Connectors for Audio Input /

Mouse for N4NS, N8NS, N16NS N4NSP, N8NSP, N16NSP

1 Connector for Audio Output.

6. CVBS OUT: HDMI output port. Connector to the HDMI Monitor.

7. HDMI OUT: Main Video Output (1280x720, 1920x1080).

8. VGA OUT: Connector for VGA Monitor.

Software & Manual CD

9. RS232C: POS Interface (TBD).

10. E-SATA: 1 External SATA Terminal.

11. USB PORT: USB Ports for Mouse or USB Flash Drive .

Rack mounts ears (x 2EA) Screws (x 6EA)

12. ETHERNET PORT1: RJ-45 Connector for Primary Network.

13. Audio 5~16: More audio inputs for N8NSP, N16NSP.

14. SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs; 1 alarm output and RS-485 for PTZ.

Adaptors (DC12V 5A, DC48V 2A),

15. POWER: DC12V input for NVR. Power cables (110V or 220V) & Audio cable (N8NSP, N16NSP)

EZ Setup

• To start the EZ Setup, right click on the mouse and select

Power on the DVR

• Please follow the proper power on procedures

to avoid damaging the NVR.

• Connect all necessary components, e.g. monitor and cameras,

before powering the NVR.

• Check the type of power source before connecting the power adaptor

EZ SETUP from the submenu.

• Enter username and password.

The default username is admin and password is 1111.

• It is strongly suggested to change the password to

prevent unauthorized access.

1. Under EZ Setup, select EZ Network for Network Setup

2. Select YES if the NVR is using an internet connection.

3. Select Auto Conguration (DHCP) or Manual Conguration (STATIC) and then click TEST button. It will automatically setup the network setting for the system (NVR).

4. Setup DDNS setting. DDNS (Dynamic Domain Name System) allows a DNS name to be constantly synchronized

with a dynamic IP address. It allows using a dynamic IP address to be associated with a static domain name. Refer to the full version manual for more information.

5.Click FINISH to save the setup.

1. In the EZ Setup window, select EZ Camera for Date/Time and Camera Setup and click on NEXT.

2. e description about EZ Camera Setup procedure is then displayed.

3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and DATE & TIME.

4. Click on NEXT to enter the EZ Camera Setup.

5. Select the IP Camera VENDOR

6. Click on SCAN to search the network for cameras.

7. Once the IP Camera information is added for the channel, click on PREVIEW to verify video

8. Click OK and EZ Camera Setup has completed.

to the NVR. Only use the power supply that is included with the unit.

• It is recommended that the Adaptors are connected to the

NVR before powering up unit.

Rev. 5/21/131305-056

Page 2

Quick Setup Guide

Speco Technologies NS Series NVRs

Recording Setup

• To setup a recording schedule, select SCHEDULE in the

RECORD menu.

• Select CHANNEL > select NONE, CONTINUOUS, MOTION, or SENSOR > Highlight area for recording setting.

• To copy a schedule to a different channel, select the desired channel

from the COPY SCHEDULE menu and click COPY.

Pin Denition of Alarm I/O & RS-485

G N

D+ S1 S3

RS-485D+

RS-485D-

D-

G N

S2 S4

Sensor Inputs

Alarm Output

Alarm I/O Setup

• In the SETUP menu, select the DEVICE tab and click on ALARM-OUT.

• Set the sensor, motion, and video loss for triggering alarm relay output.

• HDD Error and Video Loss can also trigger beeping.

Network Setup

Select the NETWORK tab.

• For DHCP, set the Network

Type to DHCP and exit from the setup. e IP address, Subnet Mask, Gateway and DNS settings are retrieved from network servers. DHCP is dynamic and the settings will change from time to time.

• For Static, set the Network Type to Static. Enter the IP address, Subnet

Mask, Gateway and DNS. Obtain this information from the network service provider.

• e Client Access must be ON for the NVR to be accessed remotely.

• To enable DDNS for free, Enter the NVR Name

and DDNS server name.

IP Camera Setup

Select the IP Camera tab. CHANNEL : Select the Channel to setup an IP Camera VENDOR : Select the Brand of the Camera SCAN : Automatically search the network for IP Cameras IP : Enter the IP Address of the desired Camera PORT : Enter the Camera stream Port Number (Default : 554) WEB PORT : Enter the Camera Web Port Number (Default: 80) PROTOCOL : Select a Protocol (Default: TCP) ID : Enter the User ID for access to the IP Camera PASSWORD : Enter the Password for the associated ID

Connect the NVR via Web-Browser Viewer

Setup Instructions:

• Make sure PC is connected to the Internet.

• Make sure NVR is setup using the steps in Network Setup section.

• Start Internet Explorer; go to ‘Tools’→ ‘Internet Options’ → ‘Security’ tab.

• Select ‘Trusted sites’ and click ‘Sites’ to specify its security setting.

• Enter the IP address of the NVR in this in this zone.

• In the Security Level area, click ‘Custom Level’. Under ‘ActiveX controls and plug-ins’, set all items to ‘Enable’ or ‘Prompt’.

• Click ‘OK’ to accept the settings and close the ‘Security Settings’ screen. Obtain Network Information of the NVR.

• Obtain the local IP address from System Information from the

Sub Menu. To get global IP address, contact network administrator or service provider.

• In the SETUP menu, select the SYSTEM tab and enable

CLIENT ACCESS.

• In the SETUP menu, select the NETWORK tab, obtain the network

and web port number.

• Start Internet Explorer and enter the IP address and web port of the NVR.- For example: http:// [ip address] : [web port] →

http://172.16.2.62:80

Connect the NVR via Web-Browser Viewer continued

• e ActiveX controls and plug-ins dialog will be prompted for

installation.

• Install the plug-ins.

• Click on ‘Connect’ and enter the username, password,

and network port of the NVR.

- e default usernames/ passwords are admin /

1111 and user1 / 1111.

- e default network port is 5445.

Mobile View Software

e NS provides mobile surveillance soware for both the iPhone and the Android™.

iPhone

• Search for ‘Speco Player’ in the Apple iTunes Store

and install the app.

• Press (+) on the upper right and enter site information.

• Click SAVE to save the site information.

• Select the saved site from “Devices”

• Select a channel(s) to view.

• Select Playback/Live then click CONNECT

Android

• Search for ‘Speco Player’ in the Google Play Store and install the app.

• Select the ADD menu and enter site information.

• Click ADD to save the site information.

/ iPad

™

Mobile View Software

• Select the saved site from “Devices” for network connection.

• Select a channel and select Live view or Playback.

• Click on START button.

continued

Connect the NVR via SpecoTech Multi-Client Viewer Software

SpecoTech Multi-Client Viewer Software is a multiple site monitoring client software that allows streaming of video and audio, and transmission of alarm signals from the NVRs over the network. The SpecoTech Multi-Client can display up to 16 NVRs and supports dual monitors.

PTZ camera control is also supported by this software. By attaching a microphone and speaker system to devices on site, the user may make bi-directional audio communication over the network. Refer to the complete manual for more information.

The SpecoTech Multi-Client Viewer Software and manual are included on the CD.

200 New Highway

Amityville, NY 11701

1-800-645-5516

www.specotech.com

Speco Technologies is constantly developing and improving products.

We reserve the right to modify product design and specications without

notice and without incurring any obligation. Rev. 5/21/13