Speco HTFB2TM, HTFD2TM Instruction Manual

INSTRUCTION
MANUAL

2MP Flexible Intensier Technology

TVI Motorized Zoom Focus Camera

Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Rev. 02/01/2017

HTFB2TM

(Bullet Camera)

HTFD2TM

(Dome Camera)

Contents

- 2 -

◑



Contents ...................................................... 2

◑



Precautions ................................................. 3, 4

◑



Safety Instructions ...................................... 5

◑



Package Contents ....................................... 6

◑



Camera Installation ..................................... 7-10

◑



Lens Adjustment ......................................... 11

◑



Specications .............................................. 12,13

◑



Camera Dimension ..................................... 14

◑



Features ...................................................... 15

◑



OSD Menu Details ...................................... 16- 30

◑



Trouble Shooting ......................................... 31

- 3 -

Precautions

Do not install the camera in
extreme temperature conditions.

Do not touch the front lens of the
camera.

Never keep the camera pointed
directly at strong light.

Do not expose the camera to
radioactivity.

Do not install the camera under
unstable lighting conditions.

Do not drop the camera or subject
it to physical shocks.

Only use the camera under conditions
where temperatures are between

-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.

This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.

It can cause malfunctions to occur.

If exposed to radioactivity the CCD
will fail.

Severe lighting change or flicker can
cause the camera to work improperly.

Housing damage can compromise
weatherproof ratings.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

- 4 -

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.

WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.

Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION : To prevent electric shock and risk of fire hazards:

ō

Do NOT use power sources other than those specified.

WARNING - To prevent electric shock and risk of fire hazards:

୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.

In USA and Canada, Use Class 2 Power Supply Only

- 5 -

Safety Instructions

Precautions for use

Please handle this camera carefully :

◑

This camera should be installed by qualied personnel only

◑

There are no user serviceable parts inside

◑

Do not disassemble this camera other than to make initial adjustments

◑

Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent re or electrical shock

◑

Please insure that your installation area can support the weight of the camera

◑

Do not use a strong or abrasive detergent when cleaning the camera

◑

Do not install near cooling or heating device

- 6 -

Package Contents

Please make sure that the following items are included in the Package:

1) HTFB2TM

• 1 Video Test Connector, Power Jack

• 1 Focus Adjustment

• 1 Bracket Base

• 1 Wrench

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws M5x10

2) HTFD2TM

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• 1 Wrench

• Set Screw

- 3 Tapping Screws 4x40

- 1 Hexagon Socket Screw M4x8

- 7 -

CAMERA INSTALLATION

CAMERA INSTALLATION

CONNECT POWER CABLE

1. WHEN USING 12 VOLTS DC (constant voltage 500mA)

2. WHEN USING 24 VOLTS AC (40 Volt Amps)

3. CONNECT VIDEO CABLE

1) WHEN USING IT AS ANALOG OUTPUT,
CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.

2) WHEN USING IT AS TVI OUTPUT,
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.

DC 12V Powe r Supply

Power In put :RED

Center : (+)

C V B S

T V I

LBACK:(-)

RED(+)

4. CONNECT RS-485 CABLE

- CONNECT 2 WIRE CABLE TO THE 485 PORT AS BELOW.

ORANGE (+)

WHITE (-)

Power Supply

AC 24V

- 8 -

CAMERA INSTALLATION

Compatibility

1) HTFB2TM

2) HTFD2TM

8.56”

4.80”

CVCJBB INTJBS INTCM

CVCJBD INTPMDFM INTCMINTWM

CAMERA INSTALLATION

- 9 -

1. HTFB2TM

WALL

SCREW M5x10, HEXAGON SOCKET , SUS, BK, 4EA

BRACKET ASSYEMBLY

SCREW TS T1, 4X25, TH, SUS, 4EA

CAMERA INSTALLATION

- 10 -

2. HTFD2TM

MACHINE SCREW 4X15, 3EA

LED VANDAL DOME

COVER

- 11 -

1. HTFB2TM

LENS ADJUSTMENT

Open the cap

VIDEO TEST

SET UP

LED LEVEL

- 12 -

1/2.9 Inch SONY 2Mega CMOS Sensor
2001 (H) X 1121 (V)
1985 (H) X 1105 (V)
1920X1080(1080p@30f / 1080p@25f)

1280X720_CROP(720p@60f / 720p@50f)
1280X720_CROP(720p@30f / 720p@25f)

Progressive Scan
50 dB

1.0Vp-p Composite. 75 Ohms / 1.0Vp-p TVI(Transport Video Interface) 75 Ohms

0.001 Lux @ F1.4(Sens-Up X32)
AUTO / Manual(1/25,1/30Sec ~ 1/30000Sec) / FLICKER

0
0
ON / OFF (Low,Middle,High) (15 Fram)

O(OFF/LOW/MIDDLE/HIGH)

Auto / Intensifier
AUTO/AWB/AWC-SET/MANUAL

0
x2 ~ x32

ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
O (AUTO/MANUAL)
0 ~ 20
0~20(Level Adjustable)
ON / OFF (16 Area)
MIRROR,V-FLIP

Image Sensor
Pixels - total
Pixels - Effective
Resolution

Scanning System
S/N Ratio

Video Output
Minimum Illumination

Shutter Speed
BLC

HSBLC
WDR(Wide Dynamic Range)

ACE(D-WDR)
(Adaptive Contrast Enhancement)
Day&Night

White Balance
Smart-IR

Sense-Up
Motion

Digital Noise Reduction
De-Fog
brightness

AGC
Privacy

Mirror

0~20(Level Adjustable) Sharpness
AUTO DETECT Defect
0Coaxial Communication (UTC)
ENG/KOR/CHN/CHA(S)/JPNLanguage
DUALPower
DC 12V - 550mA±10% AC 24V - 270mA±10% MaxPower Consumption

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) Operating Temperature

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Storage Temperature

IUGC3UN

SPECIFICATIONS

HTFB2TM (2.8-12mm)

■

2MP FIT TVI Motorized Zoom Focus Camera

2.8-12mm MFZ Lens

- 13 -

1/2.9 Inch SONY 2Mega CMOS Sensor
2001 (H) X 1121 (V)
1985 (H) X 1105 (V)
1920X1080(1080p@30f / 1080p@25f)

1280X720_CROP(720p@60f / 720p@50f)
1280X720_CROP(720p@30f / 720p@25f)

Progressive Scan
50 dB

1.0Vp-p Composite. 75 Ohms / 1.0Vp-p TVI(Transport Video Interface) 75 Ohms

0.001 Lux @ F1.4(Sens-Up X32)
AUTO / Manual(1/25,1/30Sec ~ 1/30000Sec) / FLICKER

0
0
ON / OFF (Low,Middle,High) (15 Fram)

O(OFF/LOW/MIDDLE/HIGH)

Auto / Intensifier
AUTO/AWB/AWC-SET/MANUAL

0
x2 ~ x32

ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
O (AUTO/MANUAL)
0 ~ 20
0~20(Level Adjustable)
ON / OFF (16 Area)
MIRROR,V-FLIP

Image Sensor
Pixels - total
Pixels - Effective
Resolution

Scanning System
S/N Ratio

Video Output
Minimum Illumination

Shutter Speed
BLC

HSBLC
WDR(Wide Dynamic Range)

ACE(D-WDR)
(Adaptive Contrast Enhancement)
Day&Night

White Balance
Smart-IR

Sense-Up
Motion

Digital Noise Reduction
De-Fog
brightness

AGC
Privacy

Mirror

0~20(Level Adjustable) Sharpness
AUTO DETECT Defect
0Coaxial Communication (UTC)
ENG/KOR/CHN/CHA(S)/JPNLanguage
DUALPower
DC 12V - 550mA±10% AC 24V - 270mA±10% MaxPower Consumption

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Operating Temperature

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Storage Temperature

IUGE3UN

SPECIFICATIONS

HTFD2TM (2.8-12mm)

■

2MP FIT TVI Motorized Zoom Focus Camera

2.8-12mm MFZ Lens

- 14 -

CAMERA DIMENSION

1) HTFB2TM

3.90”

8.56”

4.80”

2.95”

3.01”

2) HTFD2TM

3.94”

5.12”

5.12”

3.89”

- 15 -

General Features

●

Transfer Video Interface

The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution
of TVI picture.

●

3D-DNR

Smart 3DNR prevents the image blurring of moving object and activates only if moving objects

are appearing on the scene.

●

Smart-IR

No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in
darkness! This technology eliminates saturation of video image of the closer object in darkness
by control of the IR sensitivity. Saturation never happens in our "TVI"cameras, you can enjoy
vivid image in any dark condition!

●

Sens-Up

Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get visible and

clear images.

●

Defog

Defog function “improves” the clarity of images taken in poor conditions such as fog, smoke,

rain or snow.

●

WDR(Only For TVI Output)

A powerful and advanced technology that captures a high resolution picture even where

images appear dark.

●

CVBS(Composite Video Blanking and Sync)

TV system is switchable 'NTSC' or 'PAL' with built-in OSD.

●

Intelligent Function

An extraordinary technology that enables Speco Technologies TVI to become the ultimate
solution by providing intelligent features based on motion detection. It also strengthens crime
prevention and detection.

- 16 -

How to Set Up the camera menu

1. PRESET INDOOR, OUTDOOR, LOWLIGHT, HALLWAY, LOOBY(WDR), ELEVATOR

2. MAIN SETUP

3. EXIT RESET(ONE PUSH)

MENU SETUP DEFAULT SET MENU

1. 2MOTOR AF MODE AUTO, MANUAL
SCANNING HALF, FULL
ONEPUSH ONE PUSH
INITIAL ONE PUSH
RETURN

2. EXPOSURE BRIGHTNESS 0~20
SUTTER AUTO
MANUAL SPEED 60Hz

1/30,1/60,1/120,1/500,1/1000,1/2000,1/4000,1/8000,1/15000,1/30000

50Hz

1/25,1/50,1/100,1/200,1/400,1/800,1/1600,1/3200,1/6400,1/12800,1/25600
RETURN
FLICKER
INTENSIFY OFF, X2, X4, X8, X16, X32
AGC 0~20
RETURN

3. WHITE BAL AUTO
AWB
AWC-SET ON(PUSHING)
MANUAL KELVIN LOW, MIDDLE, HIGH
R-GAIN 0~20
B-GAIN 0~20
RETURN

7. IMAGE SHARPNESS 0~20
GAMMA 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75
COLOR GAIN 0~20

MIRROR ON / OFF

FLIP ON / OFF
ACE OFF, LOW, MIDDLE, HIGH
DEFOG ON MODE AUTO / MANUAL

4. BACKLIGHT OFF
HLC LEVEL 0~20
MODE ALL DAY, NIGHT ONLY
RETURN
BLC H-POS 0~20
V-POS 0~20
H-SIZE 0~20
V-SIZE 0~20
RETURN
WDR WEIGHT LOW, MIDDLE, HIGH
RETURN

5. SPECO DNR OFF, LOW, MIDDLE, HIGH

6. DAY&NIGHT AUTO SMART IR. 0~20
EXTERN SW HIGH, LOW
DELAY LOW, MIDDLE, HIGH
IR LED ON / OFF
IR ADJUST 0~10 IR OFF:NOT USED
RETURN
INTENSIFIER

●

Setup Menu

MENU

- 17 -

7. IMAGE LEVEL LOW, MIDDLE, HIGH
RETURN

OFF

PRIVACY ON ZONE NUM 0~15
ZOME DISP ON / OFF
H-POS 0~60
V-POS 0~34
H-SIZE 0~60
V-SIZE 0~34
Y LEVEL 0~20
CB LEVEL 0~20
CR LEVEL 0~20
RETURN

OFF

RETURN

9. SYSTEM COM. CAM ID 0~255
BAUDRATE 2400, 4800, 9600, 57600, 115200
RETURN
IMAGE RANGE FULL
COMP
USER OFFSET 0~32
RETURN
FRAME RATE
COLOR SPACE HD-CbCr, YUV, SD-CbCr
CVBS NTSC, PAL
LANGUAGE ENG, CHN, CHN(S), JPA, KOR
COLOR BAR ON / OFF
RESET ON(PUSHING)
RETURN

10. EXIT

8. MOTION ON SENSITIVITY 0~10

WINDOW TONE

0~4

WINDOW ZONE

0~3
WINDOW USE ON / OFF
DET H-POS 0~60
DET V-POS 0~34
DET H-SIZE 0~60
DET V-SIZE 0~34
ALARM ON / OFF

OFF

How to Set Up the camera menu

●

Setup Menu

MENU

- 18 -

2. Move and select the required function using the Up and Down button.

* Move the triangular indicator Up or Down to select the desired feature by pressing

the Up or Down button.

Menu Set Up

Menu items can be selected by using the OSD buttons of the camera.

1. PRESET

1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR.

- Used for a quick and easy setup for the installation environment.

* The Advaned Set Up menu will be displayed on the monitor.

SPECO TECH

1. PRESET

2.MAIN SETUP

3.EXIT

INDOOR

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO

AUTO
OFF
MIDDLE
AUTO

OFF

- 19 -

3. Change menu settings using the Left or Right button.

* Available values or Status are displayed by pressing the Left or Right buttons.

Press the button until desired value / status is displayed.

4. After Changing the setting move the arrow indicator to EXIT and press the

SET button to EXIT.

NOTE

* Move to the available submenu by moving arrow to desired feature.

* Submenu is not available when this symbol displayed “---“.

1. Move the triangular indicator to 2MOTOR using the Up and Down buttons on the Set Up menu

screen.

2. Select the desired lens type by pressing the Left of Right button.

2MOTOR

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO

AUTO
OFF
MIDDLE
AUTO

OFF

- 20 -

◆ AF MODE

- AUTO : Adjust zoom and focus automatically.

- MANUAL : Adjust zoom and focus manually.

◆ SCANNING : HALF / FULL

- HALF : Adjust auto focusing when lens focus fixed. If lens focus is not fixed well, adjust focus manually.

- FULL : Scanning full size of scree and adjust autofocusing.

◆ ONEPUSHAF : If you press OSD button 3~4 seconds, focus will be fixed automatically.

◆ INITIAL : If you press OSD button 3~4 seconds, Lens Initializing start.

1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.

EXPOSURE

1. 2MOTOR

AF MODE

SCANNING
ONEPUSHAF
INITIAL
RETURN

AUTO

HALF
ON
ON

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO
OFF
MIDDLE
AUTO

OFF

- 21 -

2. Select the desired shutter mode by pressing the Left or Right button.

2. EXPOSURE

BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN

9 IIIIIIIIIIIIIIIIIII|
AUTO
X16
20 IIIIIIIIIIIIIIIIIII|

◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.

◆ SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched

with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/30,000.

→ FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.

◆ SENS-UP : The bright screen can be displayed by sensing the degree of the darkness automatically

under the circumstance of low light condition or at night.

→ Off ~x32 Level Adjustable.

◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
→ 0~20 Level selectable.

NOTE

* Sens-Up mode is not worked when Electronic shutter is selected as Manual.

- 22 -

White Balance

Use this function when the color adjustment of a screen is needed.

1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.

2. Select the desired mode by using the left or Right button.

MANUAL

KELVIN
R-GAIN
B-GAIN
RETURN

MIDDLE
10 IIIIIIIIIIIIIIIIIII|
10 IIIIIIIIIIIIIIIIIII|

◆ AUT0 : Use this mode when the color temperature is from 2,500k to 9,500k.

◆ AWB : The function to search for the color which is matched well with the ambient environment.

◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current

lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment

should be needed.

◆ MANUAL : Manual compensation make the more detailed control possible. First, after adjusting the
white balance using the ATW or AWB mode, change the mode into the manual compensation mode
and then press Set button. While looking at the color change of the subject seen on the screen after
setting up the proper color temperature, increase the each value of the blue and the red.

- KELVIN : LOW/MIDDLE/HIGH level adjustable.

- R-GAIN : 0~20 level adjustable.

- B-GAIN : 0~20 level adjustable.

- Return : Every function is set up at the EXPOSURE menu, and then return the previous menu.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO

OFF
MIDDLE
AUTO

OFF

- 23 -

NOTE

The White Balance may not be worked properly in the following conditions. If this doesn’t
work, use the AWB mode.

* When there is a very high color temperature in the circumstances of the subject.
( for example, clear sky, Sunset)

*▶It is very dark.
*▶If the camera is headed to the fluorescent light directly or if there is a drastic lighting

change, The operation of White balance may become unstable.

BACKLIGHT

On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR)

1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button.

2. Select the desired mode by using the left or Right button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO

OFF

MIDDLE
AUTO

OFF

◆ Off : Deactivated status.

◆ HLC : This function is used to surpress or strong light source (for example, headlights of cars during

nighttime) so that other subjects can be seen in more detail. If you select HCL, a submenu appears

where you can make finer adjustments.

- LEVEL : Adjust the brightness level from which on the light source is to be masked out.
0~20 level adjustable.

- COLOR : All day/night only adjustable.

- 24 -

HLC

LEVEL
COLOR
RETURN

10 IIIIIIIIIIIIIIIIIII|
BLK

◆ BLC : This function is used to counterbalance the screen image by increasing the brightness so that a
subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC,

a submenu appears where you can make finer adjustments.

- H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by changing the position
& size.

BLC

WDR

H-POS
V-POS
H-SIZE
V-SIZE
RETURN

WEIGHT
RETURN

8 IIIIIIIIIIIIIIIIIII|
7 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|

MIDDLE

◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to
produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas
distinct. If you select WDR, a submenu appears where you can make finer adjustments.

- WEIGHT [MIDDLE, HIGH, LOW] : Select the WDR level of the camera.

NOTE

* ▶“When WDR on CVBS output is disable, and frame rate for TVI output is decreased from 30fps to 15fps.”

- 25 -

SPECO DNR

This function is used to improve the picture quality by filtering the noise which is generated under low

brightness conditions. You can set different levels here.

1. Move the triangular indicator to SPECO DNR by useing the Up and Down button.

2. Select the mode to use by pressing the left or Right button and OFF/LOW/MIDDLE/HIGH level selectable.

MENU

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO
OFF

MIDDLE

AUTO

OFF

AUTO
OFF
MIDDLE

AUTO

OFF

Day&Night

You can change the color mode of color or black / white by setting up the mode.

1. Select Day&Night using the Up or Down button on the Set Up menu screen.

2. Select the desired mode using the Left or Right buttons.

- 26 -

- SMART IR. : 0~20 smart IR level adjustable.

- EXTERN S/W [LOW/HIGH] : Set the external signal for switching between COLOR and B/W.

- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W

- IR LED : ANTI SAT ON/OFF Function.

- IR ADYUST : Adjust LED brightness(1~10).

◆ INTENSIFIER : Only color

6. DAY&NIGHT

SMART IR.
EXTERN SW
DELAY
IR LED
IR ADJUST
RETURN

2 IIIIIIIIIIIIIIIIIII|
HIGH
LOW
ON
10 IIIIIIIIIIIIIIIIIII|

◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the

low light condition. It can adjust the delay time, starting brightness and end brightness according to the

ambient conditions by pressing the Set button.

IMAGE

When selecting, the following submenu will appear.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO
OFF
MIDDLE
AUTO

OFF

- 27 -

Here you can optimise the image quality by adjusting different options.

7. IMAGE

SHARPNESS
GAMMA
COLOR GAIN
MIRROR
FLIP
ACE
DEFOG
PRIVACY
RETURN

11 IIIIIIIIIIIIIIIIIII|

0.5
13 IIIIIIIIIIIIIIIIIII|
OFF
OFF
OFF
OFF
OFF

◆ SHARPNESS [1 ~ 20] : Adjusts the image sharpness. If the level goes up excessively, it may affect the
video image and generate a noise.

◆ GAMMA [0.45 ~ 0.65] : Changes the gamma curve of the camera.

◆ COLOR GAIN [0 ~ 20] : Changes the color gain of the camera.

◆ MIRROR [ON, OFF] : Mirrors the image horizontally on the screen.

◆ FLIP [ON, OFF] : Flips the image vertically on the screen.

◆ ACE [OFF/LOW/MIDDLE/HIGH] : Intelligent lighting level control to over come even strong backlight

conditions.

◆ DEFOG [ON, OFF] : This function helps to recognize the object in a dusty weather condition.

ON, a submenu appears where you can make finer adjustments.

◆ PRIVACY [ON, OFF] : This is used to hide certain areas on the monitor. You can designate each different
16 area. The size of a designated area can be adjusted. The color of a privacy area can be selected
various colors. When you select the return, the setting values in this function menu are saved, then get

out of this menu.

- 28 -

PRIVACY

ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CB LEVEL
CR LEVEL
RETURN

0 IIIIIIIIIIIIIIIIIII|
ON
12 IIIIIIIIIIIIIIIIIII|
2 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|
10 IIIIIIIIIIIIIIIIIII|
10 IIIIIIIIIIIIIIIIIII|
10 IIIIIIIIIIIIIIIIIII|

- ZONE NUM [0~15] : Select a mask out of the 16 mask areas and set the options below for the selected

mask.

- ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks.

- H-POS [0~60] : Define the horizontal start position of the privacy mask.

- V-POS [0~34] : Define the vertical start position of the privacy mask.

- H-SIZE [0~60] : Define the horizontal size of the privacy mask.

- V-SIZE [0~34] : Define the vertical size of the privacy mask.

- Y LEVEL [0~20] : Define the brightness of the mask color.

- CR LEVEL [0~20] : Define the red amount of the mask color.

- CB LEVEL [0~20] : Define the blue amount of the mask color.

MOTION

This function is used to detect moving objects in the monitored area. When choosing ON, the following

submenu will appear where you can adjust the settings for the MOTION function.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO
OFF
MIDDLE
AUTO

OFF

- 29 -

- SENSITIVITY [0~20] : The higher the setting value is, the higher the sensitivity gets, even though the
movement of a subject.

- WINDOW TONE [0~4] : Select the number of window use for motion detection.

- WINDOW ZONE [0~3]

- WINDOW USE [ON, OFF]

- DET H-POS [0~60] : Define the horizontal start position of the monitoring area.

- DET V-POS [0~34] : Define the vertical start position of the monitoring area.

- DET H-ZISE [0~60] : Define the horizontal size of the monitoring area.

- DET V-SIZE [0~34] : Define the vertical size of the monitoring area.

- ALARM [ON, OFF] : In motion situation, you can select the detail of option setting.

SYSTEM

This can be used when you want to select the additional function control.

1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button.

2. Select one of the mode using the Up and Down button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.EXIT

AUTO
OFF
MIDDLE
AUTO

OFF

8.MOTION

SENSITIVITY
WINDOW TONE
WINDOW ZONE
WINDOW USE
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
ALARM
RETURN

|IIIIIIIIIIIIII| 0
0
0
OFF
1
1
28
15
OFF

- 30 -

◆ COM. : This menu id used for RS-485 communication. Users are able to select 'CAM ID(0~255)' and 'BAU
DRATE(2400/4800/9600/57600/115200).

- CAM ID : 1

- BAUDRATE : 9600

◆ IMAGE RANGE [FULL/COMP/USER] : Adjust the rate of YC signal to 100%(FULL), 75%(COMP) or
100%~75%(USER).

◆ FRAME RATE : Set the frame rate and resolution output from the camera.
(60Hz : 1080-30p / 720-60p / 720-30p), (50Hz : 1080-25p / 720-50p / 720-25p)

◆ COLOR SPACE [YUV/SD-CBCR/HD-CBCR] : Select different color settings for a warmer or a colder image.

◆ CVBS [PAL/NTSC] : Select the video format that matches the present TV system.

◆ LANGUAGE : ENG, CHN, CHN(S), JPN, KOR

◆ COLOR BAR [OFF/ON] : Check current condition with color bar.

◆ RESET [ON] : All settings will be restored to factory default.

Exit

Press the Set button in the exit menu to save the current settings and exit the Set Up menu.

9.SYSTEM

COM.
IMAGE RANGE
OUTPUT MODE
COLOR SPACE
FRAME RATE
CVBS
LANGUAGE
COLORBAR
RESET
RETURN

USER
1080_30P
HD-Cbcr
30 FPS
NTSC
ENG
OFF
ON

- 31 -

Trouble Shooting

PROBLEM

Nothing appears on

the screen.

☞

Check the power cable, power supply output and video

connection between the camera and monitor.

☞

Are the camera lens or the lens glass dirty?

Clean the lens / glass with a soft clean cloth.

☞

Adjust the monitor controls, as required.

☞

If the camera is facing a very strong light, change

the camera position.

☞

Adjust the lens focus.

☞

Adjust the contrast control of the monitor.

☞

If there is an intermediate device, correctly set the 75Ω/Hz.

☞

Has MOTION DET been set to ON in the menu?

☞

Has MD AREA been properly dened?

☞

Check that the AGC setting in the EXPOSURE menu is’t set to OFF.

☞

1. VERY RARELY, the auto-focusing may not work.
But, this is not a defect. This symptom occurs due to the product’s
specific feature.
For this reason, if you experience this symptom, then please manually
move the control board once to the left and once to the right.
Then, the focusing will be corrected and working properly as it should.

☞

2. (Recommendation) ONE PUSH Feature
In case the focusing does not work, please do the following to correct
this problem.
Menu -> 1. 2MOTOR -> 3. ONEPUSHAF -> Push the “ON” button for 1
second. -> The Auto Focusing will begin upon changing to “PUSHING”.

☞

Make sure that the camera isn’t facing direct sunlight or

uorescent lighting. If necessary,change the camera position.

☞

Check the settings in WHITE BALANCE menu.

☞

Check the camera is correctly connected to an appropriate

regulated power source.

The image on the

screen is dim.

The camera is not

working properly

and the surface of

the camera is hot.

The image on the

screen is dark.

Motion Detection

is not activated.

The color of the

picture is not correct.

The image on the

screen ickers.

The SENS-UP does

not work.

Auto-Focusing Is Not

Working Properly.

POSSIBLE CAUSE

200 New Highway

Amityville, NY 11701

631-957-8700

1 800 645 5516

www.specotech.com