Speco HTFB2TM Specsheet
HD-TVI 2MP Flexible Intensier® Technology
IP6
6
HEATER
FULL
HD
Bullet Camera with Junction Box
HTFB2TM
2.8-12mm motorized lens, dark gray housing
Features
•Flexible Intensifier® Technology fits any lighting application
•Supports Full HD resolution @ 30fps over coax
•Motorized lens with auto focus
•Adaptive IR LEDs reduce IR saturation
•IR Range: 90’ (depending on scene reflection)
•Signal distance up to 1600 ft. (depending on coax quality)
•True WDR (wide dynamic range) operation
Camera Specifications
Image Sensor Progressive scan 1/2.9” CMOS, 2MP
Effective Pixels 1985 (H) x 1105 (V)
Total Pixels 2001 (H) x 1121 (V)
Resolution 1920x1080 @30fps / 1280x720 @ 60fps
Minimum Illumination F1.4, 0.001 lux (sense-up x 32); 0 lux (IR LED on)
Scanning System Progressive Scan
Video Output 1.0Vp-p / 75 Ohms
S/N Ratio 50dB
AGC 0-20 (adjustable)
Electronic Shutter Auto / Manual (1/25, 1/30 – 1/30,000 sec.) / Flicker
Brightness 0-20 (adjustable)
Sense-up 2x – 32x (adjustable)
WDR On (Low / Middle / High) / Off
Day/Night Auto / Color / BW / EXT
Motion Detection On / Off (4 zones)
Privacy Masking On / Off (16 zone)
•Full OSD operation through onboard control and UTC
(up the coax)
•Additional analog output for 960H
•Built-in heater and anti-fog glass reduces condensation
•IP66 compliant, weather resistant
*
•12VDC & 24VAC dual voltage operation
•5 year warranty
A
R
E
Y
Included
Junction Box
W
A
R
N
R
A
White Balance Auto / AWB / AWC-Set / Manual
Digital Noise Reduction Off / Low / Middle / High
Mirror On / Off
V-Flip On / Off
Sharpness 0 – 20 (adjustable)
Communication UTC (up the coax)
Operating & Unit Specifications
Power Supply 12VDC / 24VAC dual voltage (power supply not included)
Power Consumption 12VDC, 520mA max. / 24VAC, 230mA max.
Operating Temperature -4°F - 140°F
Operating Humidity 20% - 95% RH
Unit Dimensions 3.94” (W) x 3.4” (H) x 8.27” (L)
Unit Weight 3.09 lbs.
Certifications FCC, RoHS
Y
T
Optional Accessories
INTCM
Corner/Pole
Adapter
*
To preserve signal quality and distance, Speco Technologies recommends using coax with a 100% copper center conductor and at least 95% braided copper shield.Speco Technologies is constantly developing
and improving products. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Spec Rev. 11/2/17
800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • specotech.com
INTJBS
Square
Junction Box
TVIUTPPT
HD Video Transceiver
with Pigtail (Balun)
TVIUTP
HD Video
Transceiver
PSW4
24VAC
Power Supply
12VDC
Power Supply
PSW5
Loading...