Speco HTBIR1M User Manual

INSTRUCTION

2MP TVI 940nm Black IR LED

Motorized Zoom Focus Camera

MANUAL

HTBIR1M

(Bullet Camera)

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 08/01/2018

123624.indd 1 2018-08-21 오전 11:39:19

Contents

◑



Contents ...................................................... 2

◑



Precautions ................................................. 3, 4

◑



Safety Instructions ...................................... 5

◑



Package Contents ....................................... 6

◑



Camera Installation ..................................... 7-8

◑



Lens Adjustment ......................................... 9

◑



Specications .............................................. 10

◑



Camera Dimension ..................................... 11

◑



Features ...................................................... 12

◑



OSD Menu Details ...................................... 13- 27

◑



Trouble Shooting ......................................... 28

- 2 -

123624.indd 2 2018-08-21 오전 11:39:20

Precautions

Do not install the camera in extreme temperature conditions.

Only use the camera under conditions where temperatures are between

-10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures.

Never keep the camera pointed directly at strong light.

Do not install the camera under unstable lighting conditions.

Severe lighting change or flicker can cause the camera to work improperly.

Do not drop the camera or subject it to physical shocks.

Do not touch the front lens of the camera.

This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.

Do not expose the camera to radioactivity.

It can cause malfunctions to occur. If exposed to radioactivity the CCD

Housing damage can compromise weatherproof ratings.

will fail.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

- 3 -

123624.indd 3 2018-08-21 오전 11:39:23

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION : To prevent electric shock and risk of fire hazards:

ō

Do NOT use power sources other than those specified.

WARNING - To prevent electric shock and risk of fire hazards:

୛Do NOT use power sources other than that specified. ୛Do NOT expose this appliance to rain or moisture.

In USA and Canada, Use Class 2 Power Supply Only

123624.indd 4 2018-08-21 오전 11:39:26

- 4 -

Safety Instructions

Precautions for use

◑

This camera should be installed by qualied personnel only

◑

There are no user serviceable parts inside

◑

Do not disassemble this camera other than to make initial adjustments

◑

Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent re or electrical shock

◑

Please insure that your installation area can support the weight of the camera

Please handle this camera carefully :

◑

Do not use a strong or abrasive detergent when cleaning the camera

◑

Do not install near cooling or heating device

- 5 -

123624.indd 5 2018-08-21 오전 11:39:26

Package Contents

Please make sure that the following items are included in the Package:

1) HTBIR1M

• 1 Video Test Connector, Power Jack

• 1 Bracket Base

• 1 Wrench

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws M5x10

- 4 Plastic Anchor

- 6 -

123624.indd 6 2018-08-21 오전 11:39:26

CAMERA INSTALLATION

CONNECT POWER CABLE

1. WHEN USING 12 VOLTS DC (constant voltage 500mA)

2. WHEN USING 24 VOLTS AC (40 Volt Amps)

3. CONNECT VIDEO CABLE

1) WHEN USING IT AS ANALOG OUTPUT, CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.

2) WHEN USING IT AS TVI OUTPUT, CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.

DC 12V Powe r Supply

Power In put :RED

Center : (+)

C V B S

T V I

LBACK:(-)

RED(+)

4. CONNECT RS-485 CABLE

- CONNECT 2 WIRE CABLE TO THE 485 PORT AS BELOW.

ORANGE (+)

WHITE (-)

Power Supply

AC 24V

123624.indd 7 2018-08-21 오전 11:39:26

- 7 -

Compatibility

1) HTBIR1M

CAMERA INSTALLATION

INTCM

SCREW-TAP,WHT,-,TH_M4X25,TP1, 4EA

SCREW-MS HEX,BLK,SUS,M5X10, 4EA

WALL

JUNCTION BOX

- 8 -

123624.indd 8 2018-08-21 오전 11:39:28

1) HTBIR1M

LENS ADJUSTMENT

Open the cap

VIDEO TEST

SET UP

LED LEVEL

- 9 -

123624.indd 9 2018-08-21 오전 11:39:28

1/2.9 Inch SONY 2Mega CMOS Sensor 2001 (H) X 1121 (V) 1985 (H) X 1105 (V) 1920X1080(1080p@30f / 1080p@25f)

1280X720_CROP(720p@60f / 720p@50f) 1280X720_CROP(720p@30f / 720p@25f)

Progressive Scan 50 dB

1.0Vp-p Composite. 75 Ohms / 1.0Vp-p TVI(Transport Video Interface) 75 Ohms

0.001 Lux @ F1.4(Sens-Up X32) AUTO / Manual(1/25,1/30Sec ~ 1/30000Sec) / FLICKER

0 0 ON / OFF (Low,Middle,High) (15 Fram)

O(OFF/LOW/MIDDLE/HIGH)

Auto / Intensifier AUTO/AWB/AWC-SET/MANUAL

0 x2 ~ x32

ON / OFF (4 Area) 3DNR (OFF/LOW/MIDDLE/HIGH) O (AUTO/MANUAL) 0 ~ 20 0~20(Level Adjustable) ON / OFF (16 Area) MIRROR,V-FLIP

Image Sensor Pixels - total Pixels - Effective Resolution

Scanning System S/N Ratio

Video Output Minimum Illumination

Shutter Speed BLC

HSBLC WDR(Wide Dynamic Range)

ACE(D-WDR) (Adaptive Contrast Enhancement) Day&Night

White Balance Smart-IR

Sense-Up Motion

Digital Noise Reduction De-Fog brightness

AGC Privacy

Mirror

0~20(Level Adjustable) Sharpness AUTO DETECT Defect 0Coaxial Communication (UTC) ENG/KOR/CHN/CHA(S)/JPNLanguage DUALPower DC 12V - 600mA±10% AC 24V - 300mA±10% MaxPower Consumption

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH) Operating Temperature

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Storage Temperature

IUCJS2N

2MP TVI 940nm Black IR LED Motorized Zoom Focus Camera with included Junction Box

2.8-12mm MFZ Lens

SPECIFICATIONS

HTBIR1M (2.8-12mm)

■

- 10 -

123624.indd 10 2018-08-21 오전 11:39:29

1) HTBIR1M

CAMERA DIMENSION

3.90”

2.95”

4.80”

8.56”

3.01”

- 11 -

123624.indd 11 2018-08-21 오전 11:39:30

General Features

●

Transfer Video Interface

The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution of TVI picture.

●

3D-DNR

Smart 3DNR prevents the image blurring of moving object and activates only if moving objects

are appearing on the scene.

●

Smart-IR

No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in darkness! This technology eliminates saturation of video image of the closer object in darkness by control of the IR sensitivity. Saturation never happens in our "TVI"cameras, you can enjoy vivid image in any dark condition!

●

Sens-Up

Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get visible and

clear images.

●

Defog

Defog function “improves” the clarity of images taken in poor conditions such as fog, smoke,

rain or snow.

●

WDR(Only For TVI Output)

A powerful and advanced technology that captures a high resolution picture even where

images appear dark.

●

CVBS(Composite Video Blanking and Sync)

TV system is switchable 'NTSC' or 'PAL' with built-in OSD.

●

Intelligent Function

An extraordinary technology that enables Speco Technologies TVI to become the ultimate solution by providing intelligent features based on motion detection. It also strengthens crime prevention and detection.

- 12 -

123624.indd 12 2018-08-21 오전 11:39:30

How to Set Up the camera menu

Setup Menu

●

MENU

1. PRESET INDOOR, OUTDOOR, LOWLIGHT, HALLWAY, LOOBY(WDR), ELEVATOR

2. MAIN SETUP

3. EXIT EXIT / RESET(L/R-PUSHING)

MAIN SETUP SUB MENU 1 SUB MENU 2 SUB MENU 3 SUB MENU 4

1. 2MOTOR AF MODE AUTO / MANUAL SCANNING HALF / FULL ONE PUSH AF ON SYNC TDN ON / OFF INITIAL ON RETURN

2. EXPOSURE BRIGHTNESS 0~20 AUTO SUTTER MANUAL SPEED 1/30 ~ 1/30000 RETURN FLICKER INTENSIFY OFF ~ X32 AGC 0~20 RETURN

3. WHITE BAL AUTO AWB AWC-SET MANUAL KELVIN LOW / MIDDLE / HIGH R-GAIN 0~20 B-GAIN 0~20 RETURN

4. BACKLIGHT OFF HLC LEVEL 0~20 MODE ALL DAY / NIGHT ONLY RETURN BLC H-POS 0~20 V-POS 0~19 H-SIZE 0~20 V-SIZE 0~19 RETURN WDR WEIGHT LOW / MIDDLE / HIGH RETURN

5. SPECO DNR OFF / LOW / MIDDLE / HIGH

6. DAY&NIGHT AUTO SMART IR 0~20 AGC THRES 0~20 AGC MARGIN 0~20 DELAY LOW / MIDDLE / HIGH RETURN COLOR B/W SMART IR 0~20 RETURN EXTERN SMART IR 0~20 EXTERN SW LOW / HIGH DELAY LOW / MIDDLE / HIGH RETURN

- 13 -

123624.indd 13 2018-08-21 오전 11:39:30

How to Set Up the camera menu

Setup Menu

●

MENU

7. IMAGE SHARPNESS 0~20 GAMMA 0.45 ~ 0.65 COLOR GAIN 0~20 MIRROR ON / OFF FLIP ON / OFF ACE OFF / LOW / MIDDLE / HIGH DEFOG OFF ON MODE AUTO / MANUL LEVEL LOW / MIDDLE / HIGH RETURN PRIVACY OFF ON ZONE NUM 0~15 ZONE DISP ON / OFF H-POS 0~60 V-POS 0~34 H-SIZE 0~60 V-SIZE 0~34 Y LEVEL 0~20 CR LEVEL 0~20 CB LEVEL 0~20 RETURN RETURN

8. MOTION OFF ON

RETURN

9. SYSTEM COM. CAM ID 0~255 BAUDRATE 2400 / 4800 / 9600 / 57600 / 115200 RETURN

COMP USER OFFSET 0~32 RETURN

10. RETURN

SENSITIVITY WINDOW TONE WINDOW ZONE WINDOW USE DET H-POS DET V-POS DET H-SIZE DET V-SIZE ALARM

IMAGE RANGE

FRAME RATE COLOR SPACE CVBS LANGUAGE COLOR BAR RESET RETURN

0~10 0~4

0~3 OFF/ON 1~60

1~34

1~60

1~34

OFF/ON

FULL

1080_30P, 720_30P, 720_60P YUV / SD-CBCR / HD-CBCR PAL / NTSC ENG / CHN / CHN(S) / JPN / KOR

OFF/ON

ON

- 14 -

123624.indd 14 2018-08-21 오전 11:39:30

Menu Set Up

Menu items can be selected by using the OSD buttons of the camera.

1. PRESET

SPECO TECH

1. PRESET

2.MAIN SETUP

3.EXIT

INDOOR

1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR.

- Used for a quick and easy setup for the installation environment.

* The Advaned Set Up menu will be displayed on the monitor.

2. Move and select the required function using the Up and Down button.

* Move the triangular indicator Up or Down to select the desired feature by pressing

the Up or Down button.

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

MENU

AUTO

AUTO OFF MIDDLE AUTO

ON

- 15 -

123624.indd 15 2018-08-21 오전 11:39:31

3. Change menu settings using the Left or Right button.

* Available values or Status are displayed by pressing the Left or Right buttons.

Press the button until desired value / status is displayed.

4. After Changing the setting move the arrow indicator to EXIT and press the

SET button to EXIT.

NOTE

* Move to the available submenu by moving arrow to desired feature.

* Submenu is not available when this symbol displayed “---“.

2MOTOR

1. Move the triangular indicator to 2MOTOR using the Up and Down buttons on the Set Up menu

screen.

2. Select the desired lens type by pressing the Left of Right button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO

AUTO OFF MIDDLE AUTO

ON

- 16 -

123624.indd 16 2018-08-21 오전 11:39:31

1. 2MOTOR

AF MODE

SCANNING ONEPUSHAF SYNC TDN INITIAL RETURN

AUTO

HALF ON ON ON

◆ AF MODE

- AUTO : Adjust zoom and focus automatically.

- MANUAL : Adjust zoom and focus manually.

◆ SCANNING : HALF / FULL

- HALF : Adjust auto focusing when lens focus fixed. If lens focus is not fixed well, adjust focus manually.

- FULL : Scanning full size of scree and adjust autofocusing.

◆ ONEPUSHAF : If you press OSD button 3~4 seconds, focus will be fixed automatically.

◆ INITIAL : If you press OSD button 3~4 seconds, Lens Initializing start.

EXPOSURE

1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF MIDDLE AUTO

ON

- 17 -

123624.indd 17 2018-08-21 오전 11:39:32

2. Select the desired shutter mode by pressing the Left or Right button.

2. EXPOSURE

BRIGHTNESS SHUTTER INTENSIFY AGC RETURN

9 IIIIIIIIIIIIIIIIIII| AUTO X16 20 IIIIIIIIIIIIIIIIIII|

◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.

◆ SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched

with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/30,000.

→ FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.

◆ INTENSIFY : The bright screen can be displayed by sensing the degree of the darkness automatically

under the circumstance of low light condition or at night.

→ Off ~x32 Level Adjustable.

◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.

→ 0~20 Level selectable.

NOTE

* INTENSIFY mode is not worked when Electronic shutter is selected as Manual.

- 18 -

123624.indd 18 2018-08-21 오전 11:39:32

White Balance

Use this function when the color adjustment of a screen is needed.

1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.

2. Select the desired mode by using the left or Right button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

◆ AUT0 : Use this mode when the color temperature is from 2,500k to 9,500k.

AUTO

OFF MIDDLE AUTO

ON

◆ AWB : The function to search for the color which is matched well with the ambient environment.

◆ AWC→SET : After letting camera focus on the blank white paper to the best condition of current

lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment

should be needed.

◆ MANUAL : Manual compensation make the more detailed control possible. First, after adjusting the

white balance using the ATW or AWB mode, change the mode into the manual compensation mode and then press Set button. While looking at the color change of the subject seen on the screen after setting up the proper color temperature, increase the each value of the blue and the red.

MANUAL

KELVIN R-GAIN B-GAIN RETURN

MIDDLE 10 IIIIIIIIIIIIIIIIIII| 10 IIIIIIIIIIIIIIIIIII|

- KELVIN : LOW/MIDDLE/HIGH level adjustable.

- R-GAIN : 0~20 level adjustable.

- B-GAIN : 0~20 level adjustable.

- Return : Every function is set up at the EXPOSURE menu, and then return the previous menu.

- 19 -

123624.indd 19 2018-08-21 오전 11:39:32

NOTE

The White Balance may not be worked properly in the following conditions. If this doesn’t work, use the AWB mode. * When there is a very high color temperature in the circumstances of the subject.

( for example, clear sky, Sunset)

*▶It is very dark. *▶If the camera is headed to the fluorescent light directly or if there is a drastic lighting

change, The operation of White balance may become unstable.

BACKLIGHT

On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR)

1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button.

2. Select the desired mode by using the left or Right button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO

OFF

MIDDLE AUTO

ON

◆ Off : Deactivated status.

◆ HLC : This function is used to surpress or strong light source (for example, headlights of cars during

nighttime) so that other subjects can be seen in more detail. If you select HCL, a submenu appears

where you can make finer adjustments.

- LEVEL : Adjust the brightness level from which on the light source is to be masked out. 0~20 level adjustable.

- MODE : All day/night only adjustable.

- 20 -

123624.indd 20 2018-08-21 오전 11:39:33

HLC

LEVEL MODE RETURN

10 IIIIIIIIIIIIIIIIIII| ALL DAY

◆ BLC : This function is used to counterbalance the screen image by increasing the brightness so that a

subject which appears dark due to a strong backlight can be displayed in more detail. If you select BLC,

a submenu appears where you can make finer adjustments.

- H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by changing the position & size.

BLC

H-POS V-POS H-SIZE V-SIZE RETURN

8 IIIIIIIIIIIIIIIIIII| 7 IIIIIIIIIIIIIIIIIII| 3 IIIIIIIIIIIIIIIIIII| 3 IIIIIIIIIIIIIIIIIII|

◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to

produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas distinct. If you select WDR, a submenu appears where you can make finer adjustments.

- WEIGHT [LOW, MIDDLE, HIGH] : Select the WDR level of the camera.

WDR

WEIGHT RETURN

MIDDLE

NOTE

* ▶“When WDR on CVBS output is disable, and frame rate for TVI output is decreased from 30fps to 15fps.”

- 21 -

123624.indd 21 2018-08-21 오전 11:39:33

SPECO DNR

This function is used to improve the picture quality by filtering the noise which is generated under low

brightness conditions. You can set different levels here.

1. Move the triangular indicator to SPECO DNR by useing the Up and Down button.

2. Select the mode to use by pressing the left or Right button and OFF/LOW/MIDDLE/HIGH level selectable.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF

MIDDLE

AUTO

ON

Day&Night

You can change the color mode of color or black / white by setting up the mode.

1. Select Day&Night using the Up or Down button on the Set Up menu screen.

2. Select the desired mode using the Left or Right buttons.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF MIDDLE

AUTO

ON

- 22 -

123624.indd 22 2018-08-21 오전 11:39:33

◆ AUTO : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the

low light condition. It can adjust the delay time, starting brightness and end brightness according to the

ambient conditions by pressing the Set button.

6. DAY&NIGHT

SMART IR. AGC THRES AGC MARGIN DELAY RETURN

2 IIIIIIIIIIIIIIIIIII| 2 IIIIIIIIIIIIIIIIIII| 2 IIIIIIIIIIIIIIIIIII| LOW

- SMART IR : 0~20 Smart IR level adjustable.

- AGC THRES : 0~20 AGC THRES level adjustable.

- AGC MARGIN : 0~20 AGC MARGIN level adjustable.

- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W.

◆ COLOR : Making the video output color always.

◆ B / W : Making the video output B/W always.

- SMART IR : 0~20 Smart IR level adjustable.

◆ EXTERN : It can change the color or B/W mode automatically through the connection with the ground

terminal. (Option for box camera and IR camera)

- SMART IR : 0~20 Smart IR level adjustable.

- EXTERN S/W [LOW/HIGH] : Set the external signal for switching between COLOR and B/W.

- DELAY [LOW/MIDDLE/HIGH] : Set the delay time for switching between COLOR and B/W

IMAGE

When selecting, the following submenu will appear.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF MIDDLE AUTO

ON

- 23 -

123624.indd 23 2018-08-21 오전 11:39:34

Here you can optimise the image quality by adjusting different options.

7. IMAGE

SHARPNESS GAMMA COLOR GAIN MIRROR FLIP ACE DEFOG PRIVACY RETURN

11 IIIIIIIIIIIIIIIIIII|

0.5 13 IIIIIIIIIIIIIIIIIII| OFF OFF OFF OFF OFF

◆ SHARPNESS [1 ~ 20] : Adjusts the image sharpness. If the level goes up excessively, it may affect the

video image and generate a noise.

◆ GAMMA [0.45 ~ 0.65] : Changes the gamma curve of the camera.

◆ COLOR GAIN [0 ~ 20] : Changes the color gain of the camera.

◆ MIRROR [ON, OFF] : Mirrors the image horizontally on the screen.

◆ FLIP [ON, OFF] : Flips the image vertically on the screen.

◆ ACE [OFF/LOW/MIDDLE/HIGH] : Intelligent lighting level control to over come even strong backlight

conditions.

◆ DEFOG [ON, OFF] : This function helps to recognize the object in a dusty weather condition.

ON, a submenu appears where you can make finer adjustments.

◆ PRIVACY [ON, OFF] : This is used to hide certain areas on the monitor. You can designate each different

16 area. The size of a designated area can be adjusted. The color of a privacy area can be selected various colors. When you select the return, the setting values in this function menu are saved, then get

out of this menu.

- 24 -

123624.indd 24 2018-08-21 오전 11:39:34

PRIVACY

ZONE NUM ZONE DISP H-POS V-POS H-SIZE V-SIZE Y LEVEL CR LEVEL CB LEVEL RETURN

- ZONE NUM [0~15] : Select a mask out of the 16 mask areas and set the options below for the selected

mask.

- ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks.

- H-POS [0~60] : Define the horizontal start position of the privacy mask.

- V-POS [0~34] : Define the vertical start position of the privacy mask.

- H-SIZE [0~60] : Define the horizontal size of the privacy mask.

- V-SIZE [0~34] : Define the vertical size of the privacy mask.

- Y LEVEL [0~20] : Define the brightness of the mask color.

- CR LEVEL [0~20] : Define the red amount of the mask color.

- CB LEVEL [0~20] : Define the blue amount of the mask color.

MOTION

This function is used to detect moving objects in the monitored area. When choosing ON, the following

submenu will appear where you can adjust the settings for the MOTION function.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF MIDDLE AUTO

ON

- 25 -

123624.indd 25 2018-08-21 오전 11:39:35

MOTION

SENSITIVITY WINDOW TONE WINDOW ZONE WINDOW USE DET H-POS DET V-POS DET H-SIZE DET V-SIZE ALARM RETURN

SENSITIVITY [0~10] : The higher the setting value is, the higher the sensitivity gets, even though the movement of a subject.

◆

◆ WINDOW TONE [0~4] : Set out area tone of motion zone.

◆ WINDOW ZONE [0~3] : Select the window area.

◆ WINDOW USE [ON, OFF]

◆ DET H-POS [0~60] : Define the horizontal start position of the monitoring area.

◆ DET V-POS [0~34] : Define the vertical start position of the monitoring area.

◆ DET H-SIZE [0~60] : Define the horizontal size of the monitoring area.

◆ DET V-SIZE [0~34] : Define the vertical size of the monitoring area.

◆ ALARM [ON, OFF] : In motion situation, you can select the detail of option setting.

SYSTEM

This can be used when you want to select the additional function control.

1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button.

2. Select one of the mode using the Up and Down button.

MENU

1.2MOTOR

2.EXPOSURE

3.WHITE BAL

4.BACKLIGHT

5.SPECO DNR

6.DAY&NIGHT

7.IMAGE

8.MOTION

9.SYSTEM

10.RETURN

AUTO OFF MIDDLE AUTO

ON

- 26 -

123624.indd 26 2018-08-21 오전 11:39:35

9.SYSTEM

COM. IMAGE RANGE FRAME RATE COLOR SPACE CVBS LANGUAGE COLOR BAR RESET RETURN

USER 1080_30P HD-Cbcr NTSC ENG OFF ON

◆ COM. : This menu id used for RS-485 communication. Users are able to select 'CAM ID(0~255)' and 'BAU

DRATE(2400/4800/9600/57600/115200).

- CAM ID : 1

- BAUDRATE : 9600

◆ IMAGE RANGE [FULL/COMP/USER] : Adjust the rate of YC signal to 100%(FULL), 75%(COMP) or

100%~75%(USER).

◆ FRAME RATE : Set the frame rate and resolution output from the camera.

(60Hz : 1080-30p / 720-60p / 720-30p), (50Hz : 1080-25p / 720-50p / 720-25p)

◆ COLOR SPACE [YUV/SD-CBCR/HD-CBCR] : Select different color settings for a warmer or a colder image.

◆ CVBS [PAL/NTSC] : Select the video format that matches the present TV system.

◆ LANGUAGE : ENG, CHN, CHN(S), JPN, KOR

◆ COLOR BAR [OFF/ON] : Check current condition with color bar.

◆ RESET [OFF/ON] : All settings will be restored to factory default.

Exit

Press the Set button in the exit menu to save the current settings and exit the Set Up menu.

- 27 -

123624.indd 27 2018-08-21 오전 11:39:35

Trouble Shooting

PROBLEM

Nothing appears on

the screen.

The image on the

screen is dim.

The image on the

screen is dark.

The camera is not

working properly and the surface of the camera is hot.

Motion Detection

is not activated.

POSSIBLE CAUSE

☞

Check the power cable, power supply output and video

connection between the camera and monitor.

☞

Are the camera lens or the lens glass dirty?

Clean the lens / glass with a soft clean cloth.

☞

Adjust the monitor controls, as required.

☞

If the camera is facing a very strong light, change

the camera position.

☞

Adjust the lens focus.

☞

Adjust the contrast control of the monitor.

☞

If there is an intermediate device, correctly set the 75Ω/Hz.

☞

Check the camera is correctly connected to an appropriate

regulated power source.

☞

Has MOTION DET been set to ON in the menu?

☞

Has MD AREA been properly dened?

The color of the

picture is not correct.

The image on the

screen ickers.

The SENS-UP does

not work.

Auto-Focusing Is Not

Working Properly.

☞

Check the settings in WHITE BALANCE menu.

☞

Make sure that the camera isn’t facing direct sunlight or

uorescent lighting. If necessary,change the camera position.

☞

Check that the AGC setting in the EXPOSURE menu is’t set to OFF.

☞

1. VERY RARELY, the auto-focusing may not work. But, this is not a defect. This symptom occurs due to the product’s specific feature. For this reason, if you experience this symptom, then please manually move the control board once to the left and once to the right. Then, the focusing will be corrected and working properly as it should.

☞

2. (Recommendation) ONE PUSH Feature In case the focusing does not work, please do the following to correct this problem. Menu -> 1. 2MOTOR -> 3. ONEPUSHAF -> Push the “ON” button for 1 second. -> The Auto Focusing will begin upon changing to “PUSHING”.

- 28 -

123624.indd 28 2018-08-21 오전 11:39:35