Speco HTBIR1M Specsheet
HD-TVI 2MP Black IR LED Bullet Camera
IP6
7
with Junction Box
HTBIR1M
2.8-12mm motorized lens, dark gray housing
Features
•Supports Full HD resolution @ 30fps over coax (HD-TVI)
•Full OSD operation through onboard control and UTC (TVi)
•12VDC & 24VAC dual voltage operation
•IP67 compliant, weather resistant
•5 year warranty
Camera Specifications
Image Sensor 1.29” 2MP SONY CMOS Sensor
Effective Pixels 1985 (H) x 1105 (V)
Total Pixels 2001 (H) x 1121 (V)
1920X1080 (1080p @30fps / 1080p @25fps)
Resolution
Minimum Illumination 0.001 lux F1.4 (Sens-Up X32)
Scanning System Progressive Scan
Video Output
S/N Ratio 50dB
AGC 0 ~ 20 (adjustable)
Electronic Shutter
BLC 0
HSBLC 0
Brightness 0 ~ 20
Sense-up 2x – 32x
WDR On (Low / Middle / High) /Off (15 Fram)
DWDR On (Low / Middle / High) /Off
3DNR On (Low / Middle / High) /Off
Day/Night Auto / Intensifier
1280X720 (720p @60fps / 720p @50fps / 720p
@30fps / 720 @25fps)
1.0Vp-p Composite 75 Ohms / 1.0p-p TVI (Transport
Video Interface) 75 Ohms
Auto / Manual (1/25,1/30 sec. ~ 1/30,000 sec.) /
Flicker
A
R
E
Y
Included
Junction Box
W
A
R
R
A
Motion Detection On / Off (4 zones)
Privacy Masking On / Off (16 zones)
Smart-IR 0
White Balance Auto / AWB / AWC - SET / Manual
Mirror On / Off
V-Flip On / Off
Sharpness 0 – 15 (adjustable)
Coaxial Communication
(UTC)
0
Defog On (Auto / Manual) / Off
Defect Auto Detect
IR Range ~131ft (depending on scene reflection)
Operating & Unit Specifications
Power Supply 12VDC / 24VAC dual voltage (power supply not included)
Power Consumption 12VDC, 600mA ± 10% / 24VAC, 300mA ± 10% max.
Operating Temperature -4°F ~ 140°F (Humidity: 20%RH ~ 95%RH)
Storage Temperature -4°F ~ 140°F (Humidity: 20%RH ~ 95%RH)
Y
T
N
Optional Accessories
INTCM
Corner/Pole
Adapter (use with
INTJBS
Square
Junction Box
PSW4
24VAC
Power Supply
PSW5
12VDC
Power Supply
INTWM only)
*
To preserve signal quality and distance, Speco Technologies recommends using coax with a 100% copper center conductor and at least 95% braided copper shield. Speco Technologies is constantly developing
and improving products. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Spec Rev. 1/4/19
800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • specotech.com
Loading...