Speco HTB11TM, HT7248TM Instruction Manual
INSTRUCTION
MANUAL
Intensier T
Motorized Zoom Focus Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Rev. 2/01/2017
HT7248TM
( Dome Camera)
HTB11TM
(Bullet Camera)
Contents
- 1 -
Motorized Zoom Focus TVI Camera
◑
Contents ...................................................... 1
◑
Precautions ................................................. 2, 3
◑
Safety Instructions ...................................... 4
◑
Package Contents ....................................... 5
◑
Camera Installation ..................................... 6-9
◑
Specications .............................................. 10-11
◑
Camera Dimension ..................................... 12
◑
Features ...................................................... 13
◑
OSD Menu Details ...................................... 14-32
◑
Trouble Shooting ......................................... 33-34
- 2 -
Motorized Zoom Focus TVI Camera
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
- 3 -
Motorized Zoom Focus TVI Camera
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
In USA and Canada, Use Class 2 Power Supply Only
- 4 -
Motorized Zoom Focus TVI Camera
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑
This camera should be installed by qualied personnel only
◑
There are no user serviceable parts inside
◑
Do not disassemble this camera other than to make initial adjustments
◑
Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑
Do not use a strong or abrasive detergent when cleaning the camera
◑
Do not install near cooling or heating device
- 5 -
Motorized Zoom Focus TVI Camera
Package Contents
Please make sure that the following items are included in the Package:
1)
HT7248TM
• 1 Video Test Connector, Power Jack
• 1 Chameleon Cover
• 1 Wrench
• Set Screw
- 3 Tapping Screws 4x40
- 3 Plastic Anchor
2) HTB11TM
• 1 Video Test Connector, Power Jack
• 1 Focus Adjustment
• 1 Bracket Base
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M5x10
- 6 -
Motorized Zoom Focus TVI Camera
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
1) WHEN USING IT AS ANALOG OUTPUT,
CONNECT YELLOW COLOR BNC CABLE TO THE BNC JACK.
2) WHEN USING IT AS TVI OUTPUT,
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
DC 12V Powe r Supply
Power Input :R ED
Center : (+)
C V B S
T V I
LBACK:(-)
RED(+)
4. CONNECT RS-485 CABLE
- CONNECT 2 WIRE CABLE TO THE RS-485 PORT AS BELOW
ORANGE (+)
WHITE (-)
Power Supply
AC 24V
- 7 -
Motorized Zoom Focus TVI Camera
CAMERA INSTALLATION
Compatibility
INTWM INTPM CVCJBD DFM
2) HTB11TM
1) HT7248TM
CVCJBB INTJBS INTCM
CAMERA INSTALLATION
- 8 -
Motorized Zoom Focus TVI Camera
1. HT7248TM
VANDAL DOME BODY ASSEMBLY
BODY OUTER COVER
TAPPING SCREW 4X40, 3EA
VANDAL DOME BASE ASSEMBLY
PLASTIC ANCHOR 6x30, 3EA
CAMERA INSTALLATION
- 9 -
Motorized Zoom Focus TVI Camera
CAUTION : The installation instructions in this manual are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
3AXIS BRACKET
SCREW TS T1, 4X25, TH, SUS, 4EA
SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA
WALL
2. HTB11TM
- 10 -
Motorized Zoom Focus TVI Camera
SPECIFICATIONS
■
Intensifier T Motorized Zoom Focus Camera
2.8-10mm Auto Iris Varifocal Motorized Lens
HT7248TM (2.8-10mm)
Image Sensor
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Resolution
Video Output
Minimum Illumination
LENS
Shutter Speed
OSD
BLC
HSBLC
WDR(Wide Dynamic Range)
ACE
Day&Night
Smart-IR
White Balance
Sense-up
Motion
Digetal Noise Reduction
De-Fog
Brightness
AGC
Privacy
Mirror
Sharpness
Defect
Lens Shading(LSC)
Colorbar
TVI / CVBS Output
Language
Power
Power Comsumption
R
S
-
485
O
p
e
rat
i
o
n
g
T
e
m
p
e
ratur
e
S
tor
a
g
e T
e
m
p
e
ratur
e
D
i
m
e
n
s
i
o
n
W
e
i
g
h
t
1/3" SONY 2Mega Exmor CMOS Sensor Imx222
1894(H) X 1105(V), 2.19M Pixels
2000(H) X 1121(V), 2.24M Pixels
Progressive Scan
More than 50dB
Digital : 1920X1080(1080p@30f / 1080p@25f)
1280X720(720p@60f / 720p@50f)
1.0Vp-p Composite. 75 Ohms
1.0Vp-p TVI(Transport Video Interface) 75Ohms
0.001Lux(Sens-Up X32)
2.8-10mm Auto Iris Varifocal Motorized Lens
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
Built-in
O
O
ON / OFF (Low,Middle,High)-(Only for TVI Output)
OFF/LOW/MIDDLE/HIGH
AUTO/COLOR/EXTERN
0~20
ATW/AWB/AWC-SET/MANUAL
x2 ~ x32
ON / OFF(4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
ON(AUTO/MANUAL) / OFF
0 ~ 20, DeFault: 10
0 ~ 20(Level Adjustable), Default: 20
ON / OFF (16 Area)
MIRROR, V-FLIP
0~20
AUTO DETECT
O
ON/OFF
NTSC/PAL Selectable
English
DC 12V / AC 24V Dual Voltage Operation
DC 12V : Heater ON-500mA, Heater OFF-300mA
AC 24V : Heater ON-195mA, Heater OFF-130mA
PELOCO-D / PELCO-P (Only for CVBS Output)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
5.10"(Dia)*3.46"(H)
1.0 Ibs
MODEL
HT7248TM
Loading...