Speco HTB10XH User Manual

INSTRUCTION MANUAL

SPECO 960H 10x Zoom Series

HTD10XH

(Outdoor IR Dome Camera)

HTB10XH

(Weatherproof Bullet Camera with mount plate)

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 12/01/2013

Precautions

◑



Contents ...................................................... 1

◑



Precautions ................................................. 2, 3

◑



Safety Instructions ...................................... 4

◑



Package Contents ....................................... 5

◑



Camera Installation ..................................... 6-9

◑



Specications .............................................. 10-11

◑



Camera Dimension ..................................... 12

◑



Features ...................................................... 13

◑



OSD Menu Details ...................................... 14- 33

◑



Trouble Shooting ......................................... 34

- 1 -

Precautions

Do not install the camera in extreme temperature conditions.

Only use the camera under conditions where temperatures are between

-10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures.

Never keep the camera pointed directly at strong light.

Do not install the camera under unstable lighting conditions.

Severe lighting change or flicker can cause the camera to work improperly.

Do not drop the camera or subject it to physical shocks.

Do not touch the front lens of the camera.

This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.

Do not expose the camera to radioactivity.

It can cause malfunctions to occur. If exposed to radioactivity the CCD

Housing damage can compromise weatherproof ratings.

will fail.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

- 2 -

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

In USA and Canada, Use Class 2 Power Supply Only

INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

☞Do NOT use power sources other than those specified.

- 3 -

Safety Instructions

Precautions for use

◑

This camera should be installed by qualied personnel only

◑

There are no user serviceable parts inside

◑

Do not disassemble this camera other than to make initial adjustments

◑

Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent re or electrical shock

◑

Please insure that your installation area can support the weight of the camera

Please handle this camera carefully :

◑

Do not use a strong or abrasive detergent when cleaning the camera

◑

Do not install near cooling or heating device

- 4 -

Package Contents

Please make sure that the following items are included in the Package:

1) HTD10XH

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• 1 Wrench

• Set Screw

- 3 Tapping Screws 4x40

- 1 Hexagon Socket Screw M4x8

2) HTB10XH

• 1 Video Test Connector, Power Jack

• 1 Bracket Base

• 1 Wrenches

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws 5x10

- 5 -

CAMERA INSTALLATION

jvuulj{Gwv~lyGjhislG

XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG

YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP

ZUGjvuulj{G}pklvGjhislG

Tjvuulj{GiujGjhislG{vG{olGiujGqhjrUG

[UGjvuulj{GhGGOyGP

TjGORGSGjvtPGGwGGGOTUGjvtPGG

uGGGlGhGkGGtG kGG˄vu˅GGGU

kjGXY}GwGz

wGpGaylk

jGaGORP

ishjraOTP

ylkORP

wGz

hjGY[}

jvtG

hGvG

wGh GkG

uGhGk

- 6 -

Compatibility

1) HTD10XH

CAMERA INSTALLATION

CVCJBD INTPMDFM INTCMINTWM

2) HTB10XH

CVCJBB INTJBS INTCM

- 7 -

1. HTD10XH

BASE ASSEMBLY

TAPPING SCREW 4X25, 3EA

DOME COVER ASSEMBLY

CAMERA INSTALLATION

- 8 -

2. HTB10XH

CAMERA INSTALLATION

CAMERA ASSEMBLY

BASE ADAPTOR BRACKET

TAPPING SCREW 4X25, 4EA

HEXAGON SOCKET SCREW M5X10, 4EA

- 9 -

Speco Technologies

(Outdoor IR Dome Camera)

10x Zoom Lens (3.8mm~38mm)

SPECIFICATIONS

HTD10XH

■

MODEL

Image Pick-Up Device

TV System

Total Pixels Effective Pixels Scanning System Synchronization Horizontal Resolution O.S.D BLC / HSBLC S/N (Y Signal) Minimum Illumination Sens-UP Electronic Shutter Speed White Balance Gain Control 3DNR WDR Motion Detection Privacy Mirror Sharpness Day/Night

DEFECT ADJ

IR OPT (SMART- IR, ATR WD-EX ) D-Zoom Communication RS485 Motion Alarm Power Power Consumption Lens Operating Temperature/Humidity Storage Temperature/Humidity Dimension Weight

HTD10XH

1/3'' SONY EXVIEW 960H CCD

NTSC

1,028(H) x 508(V) 976(H) x 494(V)

2:1 Interlace Internal

700TV Lines

Available OFF / ON 52dB (AGC off, Weight on) 0Lux(IR LED ON)

AUTO(x2 ~ x256) AUTO/(1/60SEC~1/100,000SEC)

ATW(1,800K ~ 10,500K) / AWB Adjustable ON / SMART / OFF OFF/ON ON/OFF (4 Zone) ON/OFF (8 Zone)

OFF, V-FLIP, H-FLIP, HV-FLIP

Adjustable COLOR, AUTO, EXTERNAL, BW

Auto : 256 Point

SMART-IR(AUTO, CENTER Adjustable) Level Adjustable(x1~x12) Coaxial Available Available

Dual Voltage IR LED ON:700mA Max

10x Zoom Lens (3.8mm~38mm)

-4ºF ~ +140ºF RH 95% Max

5.12"(Dia) * 3.94"(H)

1.98 Ibs

- 10 -

+ 25 hidden pages