Speakman SPK2012 Specification Sheet

®

SPEAKMAN

Se n t i n e l Ma r k ii

P.O. Box 191, Wilmington, DE 19899-0191 USA

1-800-537-2107 Fax: [phone]

www.speakmancompany.com

®

SM-3020

Anti-Scald Balanced
Pressure Shower

GENERAL SPECIFICATION

Sentinel Mark II concealed anti-scald balanced pressure shower. Chrome
plated brass wall plate with metal index. Chrome plated brass lever handle.
Independent center sleeve allows up to 1” of rough-in variation. Adjustable
temperature limit stop. Brass body. Pressure balancing module. Ceramic
temperature regulating module. Can be installed back-to-back.
Roughing-in template. Vandal-resistant standard. S-2280-AF Anystream®
wall mounted showerhead with flow control device reduces flow to 2.5
gpm/9.46 lpm maximum to meet existing ASME A112.18.1/CSA B125.1
standard. Vandal-resistant standard. Four port valve with 1/2” NPTF inlets
and outlets. Furnished with 1/2” pipe plug. Meets ASSE 1016, 1989
standard.

❑ SM-3020

Anti-scald balanced pressure shower.

OPTIONS

SUFFIX DESCRIPTION

❑ AP Anchor plate assembly
❑ BJ Ball joint
❑ SCS Spring check stops
❑ 2 S-2252-AF showerhead
❑ 6 S-2288-AF showerhead

This space for Architect/Engineer approval.

Contractor packs available upon request.

Sentinel Mark II and Anystream — Registered T.M. Speakman Company

Noryl — Registered T.M. General Electric

© Copyright, Speakman Company, 2006

29

3-5/16"
(84mm)

3-1/2"(89mm)

5/8"(16mm)TYP

1" TYP
(25mm)

2-3/4"

(70mm)

2-1/2"TO 3-1/2"

(63mm to 89mm)

1/2"(13mm)

3-5/16" (84mm)

6-1/2"

(165mm)

BRASS
LEVER
HANDLE

6'-6"(1.6 Meters)
TO FLOOR

1"(25mm) DIA
HOLE FOR SHOWER

1/2" PLUG

FINISHED WALL

4'-6" (1.4 Meters)
TO FLOOR (RECOMMENDED)
SEE NOTE #3

COLD WATER
INLET

TO SHOWER

5-1/2"(140mm) DIA HOLE
FOR VA LV E ACCESS

HOT WATER INLET

OPTIONAL STOPS(SCS)
W/ FEMALE INLETS FOR
1/2" COPPER WATER TUBE

(FOR VA LVE W/STOPS)

WALL PLAT E
7-1/2" DIA

(191mm)

SPEAKMAN

ro u g h -in S

SM-3020

®

P.O. Box 191, Wilmington, DE 19899-0191 USA

1-800-537-2107 Fax: [phone]

www.speakmancompany.com

NOTE: Unless otherwise specified, all inlets and outlets are 1/2” NPTF. Unless otherwise specified, all dimensions are in inches and are subject to

30

change without notice. For ADA mounting locations consult ADAAG, ANSI A117.1, or state regulations.