Note: Please read the "Safe Usage Guidelines" on page
10 and "Warranty" on page 11 before using the Car Kit
Page 3
Introduction
Thank you for choosing to buy this SouthWing
Car Kit. We hope you enjoy using it.
This User Guide provides all the information
you will need on how to use and look after your
product.
The NeoCar Bluetooth* Car Kit brings a true
hands-free quality driving experience. It requires no installation and provides a fast and reliable hands-free voice transmission in the car.
NeoCar works with the Bluetooth wireless technology and is compatible with all Bluetooth phones which support the headset or hands-free
profiles.
* Bluetooth is a registered trademark owned by Bluetooth
SIG, Inc. U.S.A. and licensed to SouthWing.
SouthWing
SouthWing is headquartered in Barcelona,
Spain. Our experienced team is focused on
developing the future generation of innovative
wireless communication devices.
Should you wish to learn more about the company, please visit our web site at:
www.south-wing.com
If you have any comments or suggestions on
this or any other SouthWing product, we would
love to hear from you.
What is Bluetooth?
Bluetooth is a short-range cord replacement
technology that allows the seamless interconnection of many different devices such as mobi-
En
Introduction
3
Page 4
En
le phones, portable computing devices, car kits
and headsets without the complication of cables.
Industry collaboration has meant that Bluetooth
has become a highly interoperable, affordable,
and widely deployed wireless connectivity standard.
What do I need?
As this Car Kit is a qualified Bluetooth product
supporting the Bluetooth Headset and
Bluetooth Hands-free profiles, it can connect to
any other qualified Bluetooth product supporting at least one of these profiles. Today, nearly
every mobile phone with integrated Bluetooth
supports one or both of these profiles.
As a mobile phone will most commonly be used
with your Bluetooth Car Kit, references to a
mobile phone are used throughout this user
guide.
4
Introduction
Page 5
En
Overview
On-off switch
Bluetooth button
Speaker
Volume down
Volume up
Plug for
microphone
Multi-function dial
First Steps
Setting up
1. Plug the Car Kit into the cigarette lighter
2. Plug the microphone into the car kit and turn
it towards you for optimum audio quality
3. Switch on the unit. You should also see a
blue light.
Pairing
Before using your Car Kit for the first time you
will need to pair it to your Bluetooth mobile
phone. You will need to repeat this process if
you want to use your Car Kit with another mobile
phone. Pairing is a feature of your Bluetooth Car
Kit that, even in your car, prevents anyone else
eavesdropping on your phone conversations.
Overview
First steps
5
Page 6
En
1. Make sure the power is on. Press the
Bluetooth button (you will hear two beeps, low
and high) and hold it until the red LED flashes
repeatedly 4 times per second.
2. Put the mobile phone into pairing mode (see
the instructions which came with your phone)
3. From your phone, search for the Car Kit in
the "discover" or "search for devices" Bluetooth
menu. The name of this menu varies depending on your phone.
4. "NeoCar" will then appear in the pairing list
on your phone. Select it and key in the pin
number 1111.
5. Both devices are now connected and ready
to be used.
Connect
Switching on
Switch on the Car Kit using the on-off switch.
Connect
Every time the Car Kit has been switched off,
you will need to turn it on again and connect it
with your phone to be able to make and receive
calls again. The pairing process is not necessary here. To connect, press and hold the
Bluetooth button until you hear two beeps (low
and high) to make the connection between your
phone and Car Kit. The red LED flashes 3 times
every 3 seconds. If you wish to disconnect the
Car Kit, press and hold the Bluetooth button until
you hear two beeps, (high and low). The red LED
switches off. With certain phones, you will need to
press the multifunction dial to complete the connection.
Connect
6
Page 7
Turning off
We suggest that you switch off the Car Kit
every time you leave your car.
Calls
Answering an incoming call
1. When you receive an incoming call, the Car
Kit rings, and the red LED flashes three times
every three seconds
2. Press the multi-function dial to answer the call
Please note: For privacy, you can always answer the incoming call directly from your phone.
Making a call
When the Car Kit is connected to your phone,
dial the number from your phone which will
transfer it directly to the Car Kit.
Voice dialling
If your phone supports voice dialling, you can
speak the name of the person you wish to call
through the Car Kit. Refer to the phone user
guide to enable the voice commands on your
phone.
1. Briefly press the multi-function dial; you will
hear one high beep. Then wait for a lower beep
after which you can say the voice tag, which
has to be previously recorded on your phone.
2. If the voice tag is recognised, the Car Kit will
repeat* it and dial out.
* Depending on phone mode
En
Calls
7
Page 8
En
Ending a call
During a call, press briefly the multi-function
dial to end this call.
Redialling
You can make your Car Kit redial the last number called. To do so, press the multi-function
dial three to four seconds (you will hear a
beep). After a short delay the Car Kit will dial
out the last number called.
Please note: Not all Bluetooth phones support the features of Redialling and Rejecting a call.
Transfer to phone
For privacy, you can transfer a current call
directly to your phone. Press for 3 to 4 seconds
the multi-function dial during the call.
Please note: Not all Bluetooth phones support this feature.
If it is the case with your phone, pressing the multi-function dial may end the call and not transfer it to the phone.
Adjusting the Volume
To increase the volume, press the volume up
button (+).
To decrease the volume, press the volume
down button (-).
Calls
8
Page 9
En
Suggestions
• Make sure that not only the pairing process was completed but also
that the Car Kit is connected to the phone (for example after the Car
Kit has been turned off) To connect, press and hold the Bluetooth but-
ton until you hear two beeps (low and high)
• Check that the Bluetooth mode of your phone is on.
• Make sure that the mobile phone is in the correct Bluetooth mode
and that Bluetooth is on.·
• Make sure that the Car Kit is ready for pairing by pressing the
Bluetooth button until the red LED flashes 4 times per second
• Make sure first that the voice tag used works with the phone only
• If it does, make sure the Car Kit is connected to the phone.
• Make sure that you press the multi-function dial for 3 to 4 seconds
• Some Bluetooth phones do not support this feature
Problem
Troubleshooting
Incoming call rings only in the
phone - Outgoing calls from
the phone are not transferred
to the Car Kit
Pairing is unsuccessful
Troubleshooting
Voice dialling does not work
Last number redialling does
not work
9
Page 10
En
Additional Information
Contacts
Please contact SouthWing should you have
any questions or suggestions, indicating your
product's serial number.
Email: customerservice@south-wing.com
Please note: For all warranty related issues, please return
the product to the shop from which you purchased it.
Safe Usage Guidelines
Only use the product according to the directions within this User Guide. Usage of this product contrary to these directions could cause
injury. In addition, any usage of this product
contrary to this User Guide will void any
warranty.
- Do not place the product in a fire as it may
explode causing injury or death.
- Do not attempt to service this product yourself. If the product requires servicing, this must
be performed by an approved service person.
- If the product becomes dirty, it should be cleaned with a soft cloth. Do not use any cleaning
agents as these may damage the plastics,or
electronics.
- As this product contains parts which may
cause injury if consumed, keep it out of reach
of children.
10
Additional Information
Page 11
Warranty
SouthWing provides a guarantee that this product will be free of defects in workmanship and
material for a period of 2 years. Should the product fail under normal usage within this period,
please contact the store from which it was purchased.
Conditions
1. To be granted, this guarantee requires the
presentation of the original dated purchase
invoice/receipt as well as the serial number.
SouthWing reserves the right to refuse warranty
service if this documentation is not presented.
2. Any product repaired or replaced will be
covered by the same warranty conditions until
the end of the original warranty period or 90
days (whichever is later).
3. The free repair or replacement warranty
does not cover failure of the product due to normal wear and tear, misuse, use contrary to the
product user guide, accident, modification or
adjustment, forces of nature, or damage resulting from contact with liquids.
4. Only service personnel who have been
approved by SouthWing may repair this product. Attempted repair by anyone else will void
this warranty.
5. At the discretion of SouthWing,
a faulty unit will be either repaired or replaced.
If repair is not possible, SouthWing reserves
the right to replace the faulty product with another product of equivalent value.
6. SouthWing does not offer any further
express warranty, neither written nor oral. To
the extent allowed by local law, any implied
warranty or condition or merchantability, satis-
En
Additional Information
11
Page 12
En
factory quality, or fitness for a particular purpose is limited to the duration of the warranty described above.
7. To the extent allowed by local law,
SouthWing will not be liable for any incidental
or consequential damages of any nature whatsoever, including but not limited to lost profits or
commercial loss.
Some countries or states do not allow the
exclusion or limitation of incidental or consequential damages, or limitation of the duration
of implied warranties. This may mean that the
limitations or exclusions stated above do not
apply to you.
This guarantee does not affect the consumer's
statutory right under applicable local laws in
force, nor the consumer's rights against the
dealer arising from their sales/purchase contract.
Declaration of conformity
We, Southwing, declare under our sole responsibility that our product:
NeoCar, Bluetooth Car Kit (Ncar-300)
Is in conformity with the appropriate standards
EN 300328, EN 60950, EMC (EN 301 4891,17) following the provisions of Radio
Equipment and Telecommunication Terminal
Equipment directive 99/5/EC with requirements
covering EMC directive 89/336 EEC, and Low
Voltage directive 73/23/EEC.
12
Additional Information
Declaration of conformity
Page 13
FCC Statement
(Federal Communications Commission, USA)
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
To identify this product, refer to the Part, Series,
or Model number found on the product.
The FCC requires the user to be notified that
any changes or modifications made to this device that are not expressly approved by
SouthWing may void the user's authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
En
Declaration of conformity
13
Page 14
En
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
- Consult the dealer or an experienced radio or
television technician for help
This product emits radio frequency energy, but
the radiated output power of this device is far
below the FCC radio frequency exposure limits.
Nevertheless, the device should be used in
such a manner that the potential for human
contact with the antenna during normal operation is minimized.
14
Declaration of conformity
Page 15
En
15
Page 16
En
Car Kit Response
Two beeps, low and high.
The red LED flashes repeatedly 4
times per second
Two beeps, low and high.
The red LED flashes 3 times
Action
Press and hold the Bluetooth
button and see the pairing ins-
tructions of your phone
Press and hold the Bluetooth
button. With certain phones,
you will need to press the multi-
every 3 seconds
Two beeps, high and low. The red
LED switches off
The Car Kit answers the call
function dial to complete the
connection
Press and hold the Bluetooth
button
Press the multi-function dial
once
How to do?
Commands Summary Table
16
Commands Summary Table
Pairing
Connecting the Car Kit
Disconnecting the Car Kit
Answering a call
Page 17
The Car Kit accepts the call from
the phone
The Car Kit accepts the call from
the phone
The Car Kit disconnects the call
The Car Kit calls the last number
dialled
Dial from the phone directly
Press the multi-function dial
once, and speak the voice tag
after the beep
Press briefly the multi-func-
tion dial once
Press and hold the multi-func-
tion dial for two to three
seconds
1
En
The Car Kit rejects the call
The Car Kit transfers the call to
the phone
1 Only with mobile phones supporting voice dialling
2 Depending on the phone model, these features may not be supported
Press and hold the multi-func-
tion dial
Press for 3 to 4 seconds the
multi-function dial during the
call.
2
2
Making a call
Voice dialling
Ending a call
Redialling2Rejecting an incoming call
Commands Summary Table
Transferring a call
17
Page 18
18
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.