CONVECTION OVEN
B-SErIES
Electric, SINGLE DECK
Standard Features
- Energy Star Compliant
- 7.5 kW high efciency heating elements
- Available standard depth
- Single deck convection oven is 55” in height(with optional
casters)
- Patented “plug-in, plug-out” control panel - easy to service
- Slide out control panel for full view servicing
- Stainless Steel front, top and sides
- Dependent glass doors (Full 180° opening)
- Energy saving high efciency glass windows
- Heat keeping dual door seal system
- Coved, fastener-free, porcelain interior
- Stay cool heavy duty door handle
- Soft Air, two speed, 1/2 hp, fan motor
- 11-position rack guides and 5 plated oven racks
- Solid state temperature controls
- Forced cool down fan mode
- Oven “heat” light cycles with burners
- Interior oven lights
- (1) year limited parts and labor warranty
(reference http://www.southbendnc.com/service.html
for limited warranty details)
BES/17SC
Job Item#
Available Controls
SC-Standard Controls
140°F to 500°F solid state thermostat and 60 minute
mechanical cook timer.
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Stainless steel front, top and sides.
Doors: Dependent doors with windows. Low emission glass,
stainless steel construction, heavy-duty welded steel frame
and 5/8” diameter full-length hinge pin.
Oven Interior: Porcelain enamel nish, coved, fastener free.
Rack and Rack Guides: Heavy-duty removable wire rack guides
spaced on 1-5/8” centers offer 11 different rack positions. 5 wire
racks provided with each oven.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1710/1120 r.p.m
Oven Heating: Oven heating is regulated by an adjustable solid
state thermostat control. Blower fan circulates air within the cavity
“scrubbing” heat to the oven interior for even heat distribution
within the cavity. Manual reset high limit temperature control
protects the oven from overheat condition.
(BES/17SC shown with optional casters)
Control Panel: Located on front, at right side of oven, away from
heat zone. Slide out panel extends over 17” for easy servicing.
Interior Lights: Two 40 watt high temperature recessed lamps
located within the oven cavity
Legs: 26” painted steel, triangular legs standard.
Electrical System: Terminal connections are accessible from the
rear of the oven. These sheath type electrical heating elements
located at the rear of the oven function as a single heating unit
with a combined rating of 7.5 kW. Available voltages include
208. 240, 380, and 480 VAC single or three phase, 50/60 Hz.
Ovens equipped with 480VAC single or three phase heating elements use 240V controls and motors and do not require separate
electrical lead wires.
From BES/17 Rev 2 (October/2015)
www.yatesgd.com www.yatesgraphicdesign.com
Printed in USA
Models:
BES/17SC
Dimensions -in (mm)
Full 180° Opening
29”
(737)
1”
18.625”
(473)
13.5”
(343)
MODEL
BES/17
DEpth OvEn IntErIOr rack cLEarancE ShIppIng cratE
a B WIDth DEpth hEIght WIDth DEpth WIDth DEpth hEIght vOLuME WEIght
37.25”
(946)
30.25”
(768)
8.5”
1.9” (48)
29”
(737)
(25.4)
13.1”
(333)
1.6” (40.6)
21.50”
(546)
20”
(508)
2”
(51)
Note: When shipped on legs, crated height is 69” (1753 mm)
3” (76)
28.25”
(718)
21”
(533)
57.50”
(1461)
36.5”
(927)
45.50”
(1156)
31.25”
(794)
45”
(1143)
Shown with
optional
casters.
Legs only
reduces
height by 3”
68.1 cu. ft.
(1.93 cu. m.)
620 lbs
(281.2 kg.)
UTILITY INFORMATION
Standard:1/2 horsepower, 2 speed motor, 1710/1120 r. p. m
ElECTrICal DaTa ampS pEr lINE
EaCh OVEN VOlTagE 1 phaSE
X Y Z NEuT.
8.5 kW
Heating
Elements and
Controls
(7.5 kW for Heating
Elements, 1 kW for
Controls)
208 VAC, 60Hz
220/240 VAC, 50Hz
240 VAC, 60Hz
380/220 VAC, 50Hz
415/240 VAC, 50Hz
480 VAC, 60Hz
41
33
36
23
36
18
25
21
22
12
11
12
* Electric units available for single or three phase operation and must be
specied upon ordering.
3 phaSE
21
17
18
12
11
9
.
25
0
21
0
22
0
16
4
15
4
12
0
OPTIONS AND ACCESSORIES
List the voltage, frequency, and
amps (see utility information above).
___VAC, ___Phase, ___Hz
Stainless steel rear jacket
MISCELLANEOUS
- Clearances from combustibles: Top, bottom, right,
left side -0”.
- Recommended - install under vented hood.
- Check local codes for re and sanitary regulations.
NOTICE:
Southbend has a policy of continuous product
research and improvement. We reserve the right to
change specications and product design without
notice. Such revisions do not entitle the buyer to
corresponding changes, improvements, additions or
replacements for previously purchased equipment.
Casters 4” or 6”
Swivel Caster - front with locks
Down draft diverter for direct ue
From BES/17 Rev 2 (October/2015)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
www.yatesgd.com www.yatesgraphicdesign.com