Source Technologies ETC 405, ETC 426, ETC 470, ETC 436, ETC 414 User Manual

CE User Manual

Production Dates: September 2004 - Present

Copyright © 2007 Electronic Theatre Controls, Inc.

All Rights reserved.

Product information and specifications subject to change.

Part Number:

7060M1210-06.01

Released: August 2007

Rev A

Table of Contents

Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Source Four CE guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Basic luminaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Luminaire information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Colour frame holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Replacing the HPL lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Centering lamp and adjusting the field . . . . . . . . . . . . . . . . . . . .7

Focusing the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Shaping the beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Rotating the barrel assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Adjusting the yoke position . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Cleaning lens and reflector . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Portable appliance test (PAT) guidelines. . . . . . . . . . . . . . . . . .12

ETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™,
EDMX™, Source Four
of Electronic Theatre Controls, Inc. in the United States and other countries.

All other trademarks, both marked and not marked, are the property of their respective owners.

i

®

, Revolution®, Sensor®, and WYSILink™ are either registered trademarks or trademarks

Declaration of conformity

We, Electronic Theatre Controls, Europe Ltd. declare under sole responsibility that the product:

Product name: Source Four CE

Product type/model: Source Four CE series (405, 410, 414, 419, 426, 436,

450, 470, 490)

Lot: n/a

Batch/Serial number: n/a

Item numbers: one of each model

to which this declaration relates in conformity with the following standards:

EN60598-1:2000 Luminaires, General requirements and tests

EN60598-2-17:1990 Specification for luminaires for stage lighting, television, film, and

photographic studios (outside and indoor) - equiv. BS 4533-

102.17:1990

English

following the provisions of EU LV Directive(s) 73/23/EEC

London, United Kingdom

Mr. Adam Bennette

(Place of issue) (Name of authorised person)

(Date of issue) (signature of authorised person)

Electronic Theatre Controls, Ltd. Registered office:
Unit 26-28 Victoria Industrial Estate, Grant Thornton House
Victoria Road, London W3 6UU U.K. Melton St., London NW1 28W, England
Telephone (+44) (0)20 8896 1000 Registered in England No. 3057796
Fax (+44) (0)20 8896 2000 VAT No. 6629487 90

1

English

Source Four CE guidelines

The Source Four CE is intended for professional use only. Read the entire User Guide before
using equipment.

WARNING:

• Do not mount the Source Four CE on or near a flammable surface.

• Use the Source Four CE in dry locations only, where humidity does not exceed 90

• The luminaire is for indoor use only and is not intended for outdoor use.

• For temporary installations, mount and support the Source Four CE only by the primary

• In addition to primary suspension, attach a safety cable (ETC part #7060A1022) or

• If the external cable is damaged, it shall be replaced by ETC or our service agents.

• Always hang the Source Four CE with the colour frame held securely behind the

• Always replace the lamp if it becomes damaged or thermally deformed.

• Disconnect the unit from power before all cleaning and maintenance.

• The Source Four CE is suitable for indoor use with a maximum ambient temperature:

• Maximum exterior surface temperature: T

• A multilingual label sheet is included with this manual. Affix the label of the appropriate

Please note the following safety precautions.

percent.

suspension yoke holes. Suspend the luminaire from a hook clamp or a stand mount,
using a securely tightened steel bolt (up to Ø 12 mm), flat washer and locking washer.

chain to the secondary suspension point on the Source Four CE.

retaining clip.

T

=45C

a

=217ºC

max

language over the existing warning label on the extension yoke. Do not cover ETC
trademark or CE mark.

• The Source Four CE is equipped with a safety screen that covers the lens to prevent
injury from broken glass due to lamp failure. Do not remove this safety screen.

• Keep the luminaire at least 0.8 meters away from any lit surface. Lighted objects at this
distance or greater will not exceed 90ºC temperature from projected light.

0.8m

2 Source Four CE User Manual

Basic luminaire

Lamp socket assembly

Primary suspension yoke mounting holes

Figure 1

Colour frame

Gel retainer

clip

Reflector housing

Barrel rotation knob

Beam focus knob

Barrel
assembly

Lens tube

Shutters

Safety screen
(19°, 26°, 36° and 50° only)

Colour frame holder

Retainer bolt

Retainer bolt

Drop-in iris slot

Secondary suspension point

Earth continuity cable

Yoke locking knob

Reflector

Gobo holder slot

English

WARNING:

Please note the following safety warnings before use:

Do not mount the luminaire on or near combustible surfaces.

Do not operate the luminaire without a lens installed.

Always hang the luminaire with the colour frame retaining clip in the locked
position.

3