Source Audio Soundblox 2 STINGRAY User Manual

SA224

USER’S GUIDE

2 | Welcome

WELCOME

If possible, dispose of the device at a recycling center. Do not dispose of the
device with the household waste.

For full compliance with EN 61000-4-6 standard, input cable must be less
than 3 meters in length.

Thank you for pucrhasing the Soundblox 2 STINGRAY Multi-Filter. This
powerful multi-effects unit features a dynamic collection of meticulously
crafted filter effects designed for guitar and other instruments. With
complete control over 10 different parameters like MODULATION SOURCE,
DEPTH, MIX, TONE, DRIVE and more, this pedal goes far beyond the sonic
limitations of other filter or envolope follower effects.

The STINGRAY is housed in a durable, lightweight, cast aluminum
Soundblox 2 housing, providing arena-rocking power and flexibility into a
compact, easy-to-use stompbox. The STINGRAY is also designed to be
controlled by our Hot Hand® Wireless Effect Controllers or the Dual
Expression Pedal.

The Quick Start guide will help you with the basics. For more in-depth
information about the Soundblox 2 STINGRAY Multi-Filter, move on to the
following sections.

Enjoy!

- The Source Audio Team

Stingray Manual - pages 2, 27

Overview | 3

OVERVIEW

DIVERSE SOUND PALLETE: Features up to 24 different Low Pass, Single

Peak, Multi-Peak, High Pass, and Phaser effects.

DEEP CONTROL SET: Access to control parameters typically found only
on professional rack-mount systems.

DRIVE/DISTORTION: Add gain and distortion to any of the STINGRAY’s
effects for an added boost and flavor.

STATE-OF-THE-ART DSP: Our proprietary 56-bit Digital Signal
Processor, the SA601, and crystal clear 24-bit converters.

COMPACT DESIGN: A compact, rugged, cast-aluminum housing.

UNIVERSAL BYPASS: Select either analog buffered or relay-based True

Bypass.

2 USER PRESETS: Easy-to-program user presets recallable via two
footswitches.

MULTI-FUNCTION INPUT: A multi-purpose control input for use with Hot
Hand, the Source Audio Dual Expression Pedal, or send and receive MIDI
information via the Soundblox HUB.

4 | Quick Start

QUICK START

1. POWER

To power the unit, connect the included DC adapter power supply to

the 9V jack (A) on the back panel.

Note: Using a non-Source Audio supply could damage the unit.

Please be very cautious when using 3rd-party power supplies.

2. GUITAR/AUDIO CONNECTIONS

Using standard ¼" mono cables, plug your guitar, bass, or other

instrument into the GUITAR IN (B) jack and from the GUITAR OUT (C)
jack to your amp or other audio device.

3. BRIEF KNOB, FOOTSWITCH, AND BUTTON DESCRIPTIONS

(see Controls section for more details)

• EFFECT KNOB (A): Selects the filter type.

• DEPTH (B): Controls the depth of the filter sweep.

GUITAR IN

MULTI-

FUNCTION

IN

MULTI-

FUNCTION

OUT

GUITAR OUT

9V DC

A

B C

Stingray Manual - pages 4, 25

Quick Start | 5

1 2

CONTROL
INPUT

OPTION
SELECT

ENV-ENV+

DEPTH

OPTION

SPEED

DELAY/FREQ

FEEDBACK

VOLUME

TREMOLO

MIX

(HOLD)

DEFAULT

HH

MIDI

EXP

FLANGER

CHORUS

PHASER

RESONATOR

MOD SOURCE

4 STAGE

QUAD

CLASSIC

THRU

ZERO

SHADOW

RES 1

RES 2

VIBE

6 STAGE

8 STAGEDUAL

12 STAGE

O RB ITAL

MODU L A T OR

G

D

A

C

B

F

H H

E

• OPTION (C): Adjusts the parameter selected by the OPTION SELECT button.

• SPEED (D): Adjusts the attack and decay rate of the envelopes, the rate of
the LFO (Low Frequency Oscillator), or the ”Smoothing” of the Hot Hand.

• MOD SOURCE (E): Selects between the envelopes, sine wave LFO, square
wave LFO, random sample and hold LFO, and sawtooth wave LFO.

• OPTION SELECT (F): Selects which parameter will be controlled by the
OPTION knob.

• CONTROL INPUT (G): Selects which external controller type will be used.

• FOOTSWITCHES (H): Enables/Disables presets. Press and hold either
footswitch to save an edited preset.

6 | Connections

CONNECTIONS

GUITAR IN

MULTI-

FUNCTION

IN

MULTI-

FUNCTION

OUT

GUITAR OUT

9V DC

E

D

A B

C

GUITAR IN (A): Connect to your guitar, bass, or other instrument via a MONO
¼-inch instrument cable.

GUITAR OUT (B): Connect to your amp, pedal, or other audio device via a
MONO ¼-inch instrument cable.

MULTI-FUNCTION IN (C) (optional): The multi-function input is a flexible
control input for use with external controllers. It accepts digital or analog
signals, which allows the STINGRAY to interface with the following Source
Audio accessories:

• SA115 Hot Hand Wireless Controller

• SA111 Hot Hand Wired Sensor

• SA161 Dual Expression Pedal

• SA164 Source Audio Soundblox HUB – for even more control via standard
MIDI, Soundblox Multi-Function ports, USB, and the Dual Expression Pedal.

MULTI-FUNCTION OUT (D) (optional): Use a Source Audio SA160 Daisy-Chain
Cable to connect this jack to the sensor/multi-function input of another
Soundblox pedal.

9V DC (E): Connects to the included 9 Volt DC power supply.

Stingray Manual - pages 6, 23

Controls: Knobs | 7

CONTROLS: KNOBS

EFFECT (A) (not labeled)

The EFFECT knob selects which effect type will be used. For information
on the individual settings, see the Effect Types section.

A

1 2

CONTROL
INPUT

OPTION
SELECT

ENV-ENV+

DEPTH

OPTION

SPEED

DELAY/FREQ

FEEDBACK

VOLUME

TREMOLO

MIX

(HOLD)

DEFAULT

HH

MIDI

EXP

FLANGER

CHORUS

PHASER

RESONATOR

MOD SOURCE

4 STAGE

QUAD

CLASSIC

THRU

ZERO

SHADOW

RES 1

RES 2

VIBE

6 STAGE

8 STAGEDUAL

12 STAGE

O RB ITAL

MODU L A T OR

8 | Contols: Knobs

1 2

CONTROL
INPUT

OPTION
SELECT

ENV-ENV+

DEPTH

OPTION

SPEED

DELAY/FREQ

FEEDBACK

VOLUME

TREMOLO

MIX

(HOLD)

DEFAULT

HH

MIDI

EXP

FLANGER

CHORUS

PHASER

RESONATOR

MOD SOURCE

4 STAGE

QUAD

CLASSIC

THRU

ZERO

SHADOW

RES 1

RES 2

VIBE

6 STAGE

8 STAGEDUAL

12 STAGE

O RB ITAL

MODU L A T OR

B

A

C

DEPTH Knob (A): The DEPTH knob adjusts the range and direction of
the filter sweep.

OPTION Knob (B): The OPTION knob controls six different parameters,
each selected by the OPTION SELECT button. Press the OPTION SELECT
button (C), located to the left of the OPTION knob, to cycle through all six
choices. The selected parameter is indicated by one of three green/red
LEDs. Green indicates the upper parameter (white print), and red
indicates the lower parameter (yellow print).

Stingray Manual - pages 8, 21

Controls: Knobs | 9

• FREQUENCY (Green LED): Adjusts the frequency center point of the
modulation range of the filter. As the knob is turned from its minimum
position (fully counter-clockwise) to its maximum position (fully
clockwise), the center point of the frequency range moves from low to
high.

• RESONANCE (Red LED): Adjusts the width, and sometimes height, of
the various peaks and notches in the selected filter’s frequency
response. As the knob is turned from its minimum position (fully
counter-clockwise) to its maximum position (fully clockwise), the
resonance setting moves from low to high, adding a more pronounced
sound. This control is sometimes referred to as “Q”.

Press button to
select option