SOUNDMAX ELECTRONICS YK5135K00 Users Manual

Other External Components

View Camera

1

NOTE

• To connect a camera, see .

• To use a rear view camera, a REVERSE lead
connection is required.

•

e rear view screen is displayed when you shift

Th

the gear to the reverse (R) position.

Display the camera screen

Ñ

1

Press the [MENU] button.

 MENU screen appears.

Touch [].

2

 View camera screen appears.

3

Adjust each item as follows.

1

2

3 Touch [Camera].

4 Set each item as follows.

Other External Components

Ñ

Camera Setup

Press the [MENU] button.

 MENU screen appears.

Touch [ ].

 SETUP Menu screen appears.

[ ]

 Camera screen appears.

■ Parking Guidelines

You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.

Default is “ON”.

■ Guidelines SETUP

f you select [ON] for [Parking Guidelines],

I
adjust the parking guidelines. See To adjust
the parking guidelines (P.36).

1

Camera off

Touch to exit the camera screen.

English

27

Other External Components

To adjust the parking guidelines

NOTE

• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.

• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.

1 Touch [ON] of [Parking Guidelines] in the

Camera screen.

Touch [Guidelines SETUP] in the Camera

2

screen.

3

Adjust the parking guidelines by
selecting the mark.

Adjusting the position of the selected

4

mark.

External audio/video players—
AV-IN

1 Connect an external component to the

AV-IN input terminal.

2 Select [AV-IN] as the source.
3

Turn on the connected component and
start playing the source.

A

C

B

Make sure that A and B are horizontally
parallel, and that C and D are the same
length.

NOTE

• Touch [Initialize] and after touch [Yes] to set all
the

marks to the initial default position.

28

D

Setting Up

Setting Up

Monitor Screen Setup

You can adjust image quality in video screen.

1

Press the [MENU] button.

 MENU screen appears.

2 Touch [ ].

 Screen Control screen appears.

[]

3 Adjust each item as follows.

■ Contrast / Brightness / Colour / Tint

Adjusts each item.

NOTE

• Adjusting items are different depending on the
current source.

System Setup

NOTE

• Each operation in this section can be star ted
from the multi function menu.

1 Press the [MENU] button.

 MENU screen appears.

2 Touch [ ].

See the following section for each
setting.

English

29

Setting Up

User Interface Setup

You can setup user interface parameters.

1

Press the [MENU] button.

 MENU screen appears.

Touch [ ].

2

 SETUP screen appears.

3 Touch [User Interface].

[ ]

 User Interface screen appears.

Set each item as follows.

4

■ Beep

urns the key touch tone on or off.

T
Default is “OFF”.

■ Language

Selects a language.

■ Steering Remote Controller

Sets the desired function in the steering
remote controller. (Contact your KENWOOD
dealer for details.)

■ Clock Adjust

Adjust the dat

e and time manually. (P. 7)

Special Setup

You can setup Special parameters.

1

Press the [MENU] button.

 MENU screen appears.

Touch [ ].

2

 SETUP screen appears.

3 Touch [Special].

 Special screen appears.

4

Set each item as follows.

■ DEMO

Set the demonstration mode. Default is “ON”.

■ Sof

tware Information

Check the software version of this unit.

(P. 34)

■ Open Source Licenses

Displays the open source licenses.

■ Initialize

Touch [Initialize] and then touch [Yes ] to set
all the settings to the initial default settings.

Software Information

Ñ

Check the software version of this unit.

1

Touch [Software Information] in the
Special screen.

Confirm the software version.

2

30

Setting Up

Display Setup

1 Press the [MENU] button.

 MENU screen appears.

2 Touch [ ].

 SETUP screen appears.

3

Touch Display .

[ ]

 Display screen appears.

4

Set each item as follows.

■ Dimmer

Select dimmer mode.

OFF: The display and buttons do not dim.
ON: The display and buttons dim.
SYNC (Default): Turns the dimmer function

on or off when the vehicle light control
switch is turned on or off.

■ Screen Adjustment

Displays the Screen Adjustment screen.

Ñ Change background image or

color

1

Touch [Background] in the Display screen.

2 Select an image.

■ Background

Changing background image or color.

English

31

Setting Up

To register original image

You can load an image from the connected USB
device and set it for the background image.

Before operating this procedure, it is necessary
to connect the device which has the image to
load.

1

Touch [User1 Select] or [User2 Select] in
the Background screen.

Select the image to load.

2

Touch [Enter].

3

AV Setup

You can set AV parameters.

1

Press the [MENU] button.

 MENU screen appears.

Touch [ ].

2

 SETUP screen appears.

3 Touch [AV].

 AV screen appears.

Set each item as follows.

4

■ AV-OUT

Specify whether to output the current source
signal from the AV OUTPUT terminal.

“ON”/ “OFF” (Default)

NOTE

• Images can be output only from the AV IN
and USB (video file) source.

• If display of the rear view camera image is
selected when the AV-IN source is being
played, no image is output from the AV
OUTPUT terminal.

 The selected image is loaded and the

display returns to the Background
screen.

NOTE

• Touching [ ] rotates counter clockwise.

• Touching [

• Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP
(.bmp)

] rotates clockwise.

32

■ CarPlay Sidebar

Select the position of the control bar (left or
right) shown on the touch panel.

“Left” (Default)/ “Right”

NOTE

• The setting is available when an iPhone is
disconnected.

■ AV Color Adjust

You can adjust image quality in video screen.

NOTE

• Adjusting items are different depending on
the current source.

Controlling Audio

Controlling Audio

NOTICE

• Each operation in this section can be star ted
from the multi function menu.

You can adjust the various settings such as
audio balance or subwoofer level.

Press the [MENU] button.

1

 MENU screen appears.

2

Touch [ ].

See the following section for each
setting.

Speaker/ X’over setup

1 Press the [MENU] button.

 MENU screen appears.

2

Touch [ ].

 Audio screen appears.

3

Touch [Speaker/Xʼover].

4

Select a car type.

You can setup the car type and speaker
network, etc.

If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each
channel) to have the highest surround
effects.

Touch the speaker (1) you wish to adjust

5

and set each item (2) as follows.

1

2

■ Speaker

You can select a speaker type and its size to
get the best sound effects.

When the speaker type and size are set,
the speaker crossover network is set
automatically.

■ Location (Only for Front, Rear)

Select the speaker position you have fixed.

English

33

Controlling Audio

■ Tweeter (Only for Front)

You can set the tweeter when you are
selecting front speakers.

None, Small, Medium, Large

ver

■ X’o

Displays the speaker crossover setup screen.
You can adjust the crossover setup that was

set automatically when you selected the
speaker type.

For details, see Crossover network setup

Crossover network setup

Ñ

You can set a crossover frequency of speakers.

Touch [Xʼover].

1

2 Touch the speaker to set.

3

Set each item as follows.

■ TW (Tweeter) Gain *

Adjusts the tweeter level. (When front is
selected on Speaker Select screen)

■ Phase Inversion*

Sets the phase of subwoofer output.
Check [Phase Inversion] to shift the phase

180 degrees. (When subwoofer is selected
on Speaker Select screen)

1

*

Only when “LPF FREQ”/“HPF FREQ” is set to

a mode other than “Through” in [Xʼover].

2

*

Only when “Tweeter” is set to “Small”,

“Medium”, “Large” in [Speaker Setup].

3

*

Only when “Subwoofer” is set to a mode

other than “None” in [Speaker Setup].

2

3

Controlling General Audio

1

Press the [MENU] button.

 MENU screen appears.

2 Touch [ ].

 Audio screen appears.

3 Touch [Fader / Balance].

■ HPF FREQ

High Pass Filter adjustment. (When front or
rear speaker is selected on Speaker Select
screen)

■ LPF FREQ

w Pass Filter adjustment. (When subwoofer

Lo
is selected on Speaker Select screen)

1

■ Slope*

Sets a crossover slope.

■ Gain

Adjusts the front speaker, rear speaker, or
subwoofer level.

34

4

Set each item as follows.

■ Fader / Balance

Adjust the volume balance around the
touched area.

[C] and [D] adjust the right and left volume
balance.

[R] and [S] adjust the front and rear volume
balance.

■ [Center]

Clear the adjustment.