Soundmax SM-CCR3055F User Manual [ru]

SM-CCR3055F

USB/SD media player USB/SD-медиаплеер Instruction manual Руководство по эксплуатации
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, opera ti ng and/or adjusting the produc t a nd keep the manual for referenc e in the future.

Table of contents

TABLE OF CONTENTS ...................................................................................................................................................... 2

IMPORTANT SAFEGUARDS ............................................................................................................................................ 3

ACCESSORIES .................................................................................................................................................................... 4
INSTALLATION/CONNECTION ...................................................................................................................................... 5
CONTROL ELEMENTS ....................................................................................................................................................... 8
GENERAL OPERATIONS .................................................................................................................................................. 9
RADIO OPERATIONS ........................................................................................................................................................ 11
USB/SD OPERATIONS ..................................................................................................................................................... 12
TROUBLESHOOTING GUIDE .......................................................................................................................................... 13
SPECIFICATION ................................................................................................................................................................. 14
2
Important safeguards
Read carefully through this manual to familiarize you rself with this high-quality sound sy stem.
The beginning of operation is the moment of the unit installation. Before use the device in winter it is
recommended to heat up the pas s enger compartment during 20 seconds or to the operation temperature.
Use the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the sc r een and other components of device a nd can result an outage.
Disconnect the vehicle's negative battery term inal while mountin g a nd connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may ca use serious damage to the unit.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards such as electrical shock.
Do not use the un it in places where it can b e exposed to water, moistu r e a nd dust.
Do not open covers and do not repair yourself. Consult th e d ea ler or an experienced tech nician for help.
Make sure you dis c onnect the power supply and aerial if you will not be using the sys te m for a long period
or during a thund er storm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before in stallation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out the power amplifie r .
3

Accessories

1. Receiver 1 pc
2. Mounting parts:
Hexagon nut 1 pc Mounting sleeve 1 pc Release keys 2 pcs Metal bar 1 pc Plain washer 1 pc Spring washer 1 pc Self-tapping screw 1 pc Screw 4 pc
3. Connector 1 pc
4. Consumer infor m ation 1 pc
5. W arran ty card 1 pc
6. I nstruction manual 1 pc
4

Installation/Connection

General notes
Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
Before finally installing the unit, connect the wirin g an d m a ke sure that the unit wor ks properly.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the
vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergenc y stop.
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, fr om the heater, or whe r e it would be subject to dus t, dirt or excessive vibration.
DIN FRONT-MOUNT
1. Car dashboard
2. Sleeve
3. Bolt
4. Nut
5. Spring washer
6. Screw
7. Metal strap
8. Flat washer
1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires , dashboard elements , etc) for the unit installation.
2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.
3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install the strap as shown in the picture. You can bend the strap to the needed angle with your hands.
5
4. Make the necessary wire connections. Ensure the connections are correct.
5. Install the un it into the sleeve until the side locks are f ixed.
Dismantling the unit
1. Make sure the ignition is turned off, then disconnect the cable from the
vehicle battery’s negative (-) terminal.
2. Remove the metal s tr ap attached the back of the unit (if atta ched).
3. Insert both of the supplied keys into the slots at the middle left and right
sides of the unit, then pull the unit out of the dashboard.
6
Connection diagra m
Note: Auto antenna wire is intended for power supply of the antenna and for remote control of an
additional amplifier.
7

Control elements

Front panel
1.
button
2. MOD button
3.
4.
5. CLK button
6. BND button
7. VOLUME knob/
BASS/TREBLE/BALANCE /FADER/LOUD/EQ button
8. RESET button (hole )
9. 1 PLAY/PAUSE
2/RPT buttons
10. 3/RDM
4 buttons
11. LCD
12. 5/-10
6/+10 buttons
13. SD card slot
14. AUX input
15. USB port
button
button
8

General operations

Turning the unit on/off
Press the button to turn th e unit on. Press the button again to turn the unit off.
Reset the unit
When first usin g the device or after repla cing the car batter y, you must rese t the unit. Press the R ESET
button (hole) with a pointed object (such as a ballpoint pen) to set the unit to its initial state.
When some errors occ ur, you can also press the RESET button to r eturn to factory settings, but note that
it will erase clock setting and some mem or ized functions.
Mode selection
Press the MOD button repeatedly to select between Radio, AUX, M P3 modes. Operation modes are indicated
on the display. M P3 mode is not available u nless a memory car d or a USB device is conn ec te d.
Volume control
Adjust the volum e by rotating the VOLUM E knob.
Clock
Press the CLK button to display time. P ress and hold this button to set the clock , rotate the volume knob for
adjustment.
9
Loading...
+ 19 hidden pages