Soundmax SM-CCR3051F User Manual [ru]

SM-CCR3051F

USB/SD media player USB/SD -медиаплеер Instruction manual Руководство по эксплуатации

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

TABLE OF CONTENTS .......................... ............................................................................................................................ 2

IMPORTANT SAFEGUARDS ............................................................................................................................................ 3

ACCESSORIES .......................... .......................................................................................................................................... 4

INSTALLATION/CONNECTION ............... ....................................................................................................................... 5

CONTROL ELEMENTS ....................................................................................................................................................... 9

GENERAL OPERATIONS .................................................................................................................................................. 10

RADIO OPERATIONS ........................................................................................................................................................ 12

USB/SD OPERATIONS ..................................................................................................................................................... 13

TROUBLESHOOTING GUIDE .......................................................................................................................................... 15

Important safeguards

 Read carefully through this manual to familiarize yourself with this highquality sound system.  The beginning of operation is the moment of the unit installation. Before use the device in winter it is

recommended to heat up the passenger compartment during 20 seconds or to the operation temperature.

 Use the unit with the temperature that goes beyond the operation temperature greatly decreases the

operation resource of the screen and other components of device and can result an outage.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.  When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or

create safety hazards such as electrical shock.

 Do not use the unit in places where it can be exposed to water, moisture and dust.  Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.  Make sure you disconnect the power supply and aerial if you will not be using the system for a long period

or during a thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please

confirm it before installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may

overload or burn out the power amplifier.

Accessories

1. Receiver 1 pc

2. Mounting parts: Trim frame 1 pc Mounting sleeve 1 pc Release key 2 pcs

3. ISOconnector 2 pcs

4. Consumer information 1 pc

5. Warranty card 1 pc

6. Instruction manual 1 pc

Installation/Connection

General notes

 Choose the mounting location where the unit will not interfere with the normal driving function of the

driver.

 Before finally installing the unit, connect the wiring and make sure that the unit works properly.  Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the

vehicle.

 Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a

sudden stop, like an emergency stop.

 Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or

from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT-MOUNT

1. Car dashboard

2. Sleeve tab to bend

1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation.

2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place.

3. Make the necessary wire connections. Ensure the connections are correct.

4. Install the unit into the sleeve until the side locks are fixed.

Trim frame installation

To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front panel; otherwise you are not able to install the trim frame.

Dismantling the unit

1. Make sure the ignition is turned off, and then disconnect the cable from the

vehicle battery’s negative () terminal.

2. Insert your fingers into the groove in the front side of the trim frame

(if installed; apply some effort to detach the frame). Pull the frame to detach it.



3. Insert both of the supplied keys into the slots at the middle left and right

sides of the unit, then pull the unit out of the dashboard.

Connection diagram

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.

Cut the connector, connect the colored leads of the power cord to the car battery as shown in the table below for speaker and power cable connections.

Location Function

Connector A Connector B

1 2 3 4 5 6 7 8

Rear right (+)  Purple  Rear right ()  PurpleBlack  Front right (+)  Grey  Front right ()  GreyBlack Battery +12V/Yellow Front left (+)  White Power antenna/BlueWhite Front left ()  WhiteBlack  Rear left (+)  Green Ignition/Red Rear left ()  GreenBlack Ground/Black

Power antenna wire is intended for power supply of the antenna and for remote control of an additional amplifier.

Control elements

Front panel

2. VOLUME knob/

SELECT button

3. APS button

4. MUT/LUD button

5. RESET button (hole)

6. Display

7. Memory card slot

8. PWR/MOD button

9. BND/CLK button

10. 1/ button

11. 2/INT button

12. 3/RPT button

13. 4/RDM button

14. 5/ button

15. 6/ button

16. AUX in

17. USB port

buttons

LCD layout

1. Radio band indicator

2. Digit display (frequency, track time, etc.)

3. FM frequency

4. Signal indicator

5. Not active

6. SD playback indicator

7. USB playback indicator

8. Stereo signal reception indicator

9. Mute indicator

10. Intro mode on

11. Repeat mode on

12. Random playback on

13. Not active

14. Signal indicator

General operations

Turning the unit on/off

Press PWR/MOD button to turn the unit on. Press and hold the button again to turn the unit off.

Mode selection

Press PWR/MOD button repeatedly to select between Radio, auxiliary input, USB or Memory Card modes. Modes of operation are indicated on the display. Memory card and USB modes are not available unless a memory card or USB device is connected.

Volume control

Adjust volume by rotating VOLUME knob.

+ 22 hidden pages