SoundMax SM-2501 User Manual

SM-2501
ALARM CLOCK RADIO РАДИОПРИЕМНИК С ЧАСАМИ Instruction manual Руководство по эксплуатации
Description
2. ON/OFF/AUTO/ALARM switch
3. Auto indicator
4. Display
5. TUNING knob
6. BAND switch
7. VOLUME regulator
8. MIN button
9. SNOOZE button
10. TIME button
11. HOUR button
12. SLEEP button
13. ALARM button
Bottom of the set: battery compartment for 1x9 V battery (not included) for temporary time storage.
Important safeguards
Caution: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Dangerous voltage: Uninsulated dangerous voltage, that may be of sufficient magnitude to constitute a risk of electrical shock to
persons, is present within this product enclosure.
Attention: The owner’s manual contains important operating and maintenance instructions for your safety, it is necessary to refer
the manual.
Power supply
AС operation
The appliance is for household use only.
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your
home.
Insert the plug into the power supply.
The set is now working as an electronic clock.
2
Battery backup
Insert 1x9 V battery (not included) to the terminal inside the battery compartment. Your set will not work normally from the battery
supply, but there is now the advantage that, in case there is a mains current failure, your clock will continue to work. The clock display will not light up, the clock time will be held in the clock memory by the battery back-up system. This enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy.
When the battery is exhausted, it should be removed from the set to prevent leakage. If you do not wish to take advantage of the
battery back-up system, your set will work normally without a battery. However, if disconnected from the mains, the clock figures will flash when the mains are re-connected and you must re-set the clock as described in the AC Operation paragraph.
Setting the clock
To set time
Slide the ON/OFF/AUTO/ALARM switch to “OFF” position.
Press and hold the TIME button.
Press HOUR button and MIN button respectively to set hour and minute. The time will be showed on the display.
Radio operations
Tuner operations
Slide the ON/OFF/AUTO/ALARM switch to “ON” position.
Slide the BAND switch to FM or AM position to select FM or AM band.
Adjust TUNING knob for the desired radio station.
Slide the ON/OFF/AUTO/ALARM switch to “OFF” position to turn the radio off.
Volume level
Adjust the volume with VOLUME regulator for the desired listening level.
Sleep to music
The radio can be set to play and to switch off automatically after desired time.
Slide the ON/OFF/AUTO/ALARM switch to “OFF” or “AUTO” or “ALARM” position and adjust the volume with VOLUME regulator.
Press the SLEEP button and MIN button simultaneously. Release it when the desired time is reached.
Press the SLEEP button and HOUR button simultaneously. Release it when the desired time is reached).
The radio will be turned off automatically after the set time.
When the radio in sleep operation is playing, press SNOOZE button to turn off the radio.
Antenna
For AM reception, this radio incorporates a highly sensitive ferrite core bar antenna.
For FM reception, this set is specially equipped with an external wire as FM antenna. Be sure to untwist it to its fullest length for
peak performance.
3
Loading...
+ 4 hidden pages