This document describes the minimum required equipments for the Electrical Repair Process of the Z770i mobile phone.
Equipment listed without a part number is not orderable from Sony Ericsson and must be bought locally.
2 Column Definitions
The matrix in the end of the equipment tables describe where the actual equipment is needed (marked with an X) or may be
needed/optional (marked with a Z).
Flash upgrade: Equipment for downloading software to the unit, both signalling and test-program.
Manual test: Equipment necessary to perform a manual test.
Repair: Equipment necessary for replacing components.
Go/No Go test: Equipment necessary for Go/No Go test.
1209-6240 REV 4
Company Internal
Calibration with SERP: Equipment necessary to perform a calibration with SERP. Calibration can only be done by authorized
repair centers.
The column that assist a specifying and/or clarifying the equipment needed are considered description type columns.
• Description The name of the equipment
• Part Number The Sony Ericsson part number to use when ordering from Sony Ericsson.
• Description Additional information that helps to specify the equipment.
Some of the required equipment will be provided by Sony Ericsson and some equipment has to be sourced locally. This chapter will
separate these equipments.
3.1 Sony Ericsson Provided Repair Equipment
Flash Upgrade
Manual Test
Go/No Go
Test
Calibration in
SERP
Repair
1209-6240 REV 4
Company Internal
Description Part Number Comments
SonyEricsson programming
interface - SEPI
DCU-65/USB Cable RPM 131 12 Used for SonyEricsson programming interface
SEPI Flash Cable KRY 101 1119 SonyEricsson programming interface cable X
Torque Screwdriver * NTZ 112 459 Torque set to 18 Ncm for Torx Bit T6
Front opening tool NTZ 112 302/2 Opening tool X
Torx Bits T6 NTZ 112 288 Spare part to screwdriver X
Torx Bits T5 NTZ 112 478R1 Spare part to screwdriver X
Flex film assembly tool NTZ 112 521 Tweezers X
Shield Fence Plier NTZ 112 537 For use when repair under shield fence is
Lead-free labels (sheet of 24) SVF 930 1379 These lead-free labels must be applied to all
Dummy Battery 1208-5627 Dummy Battery (BST-38) Z X
Rework fixture LTD 260 273 For PCBA (Printed Board Assembly) X
LTN 214 1484 USB/Interface Box+CD X X
cable - SEPI
Torque set to 10 Ncm for Torx Bit T5
necessary
materials and tools that contact the solder.
RF Holder for Z770i 1203-4211 Used together with antenna connector and RF
RF Connector SMK SXA1097057 Z X
PCBA Repair Fixture, Z770i
RF Test Cable Flexible 1M RPM 119 855 This is the only approved RF cable! Z X
USB Activation Dongle NTZ 112 1071 X
256MB Memory Stick
Micro(M2)
Plectrum/SVC & Repair NTZ 112 590
30.5MM RF CABLE RPM119891
Cable Adapters for WCDMA
calibration
Z X
cable.
1209-9579 Only for Z770i X
KDR 109
171/256
1206-9888
This item is needed to test the applicable product’s memory
slot.
Guitar Pick
X
X
X
X
3.2 Picture of equipments orderable from Sony Ericsson