Sony Ericsson Z320C User Manual

User guide

Z320c

This is the Internet version of the user's guide. © Print only for private use.

Congratulations on your purchase of the Sony Ericsson Z320c. For additional phone content, go to www.sonyericsson.com/ cn/fun. Register now to get free online storage and special offers at www.sonyericsson.com/cn/myphone. For product support, go to www.sonyericsson.com/cn.

Instruction symbols

The following instruction symbols appear in this User guide:

> Use the navigation key to scroll and select.

Press the navigation key up.

Press the navigation key down.

Press the navigation key to the left.

Press the navigation key to the right.

Tip

Note

Warning

Indicates that a service or function is network- or subscription-dependent. All menus or functions may not be available in your phone. Consult your network operator for more information.

This is the Internet version of the user's guide. © Print only for private use.

Prepare the phone

Always turn off your phone and detach the charger before you insert or remove the SIM card.

To insert the SIM card and battery

1 Remove the battery cover by sliding the battery release

latch down.

2 Slide the SIM card into its holder with the contacts facing

down.

3 Insert the battery with the label side up and the connectors

facing each other.

4 Slide the battery cover into place and close the battery

release latch

This is the Internet version of the user's guide. © Print only for private use.

Charge the battery

Your phone battery is partly charged when you buy it.

It may take 30 minutes for the battery icon to appear on the screen.

Non-USB Charger (old type)

USB Charger (new type)

A AC adapter A1 AC adapter

connector

A2 AC adapter USB

socket BUSB cable B1 USB cable connector B2 USB cable plug

This is the Internet version of the user's guide. © Print only for private use.

Using the USB charger

To connect the charger and charge the battery

1 Connect the USB cable plug to the AC adapter USB socket,

as shown in the above illustration. The USB cable is supplied with your phone.

2 Connect the USB cable connector to your phone. Press

a key to view the charging status on the screen. It takes approximately 2.5 hours to fully charge the battery.

To remove the charger

1 Charge your battery until the battery icon indicates a full

charge.

2 Tilt the USB charger connector upwards to remove it.

This is the Internet version of the user's guide. © Print only for private use.

Note:

1 The USB cable for the new USB charger shown in the

illustration on page four (Part. B in the new-type charger illustration) is only intended for charging your phone.

Do not use it for transferring data.

2 The USB cable for the USB charger shown in the illustration

(Part. B in the new-type charger illustration) is only intended for connection to the AC adapter (Part. A in the new-type charger illustration) to charge your phone. It must not be

used for connection to a PC.It can only be used for charging your phone. Never use it for charging accessories.

3 Sony Ericsson strongly recommends that you use only

Sony Ericsson branded original batteries, the part of power supply device in accordance with YD/T 1591-2006 specifications of Communications Industry Standards of P. R. China (Part A in the new-type charger illustration) and the USB cable supplied with your phone to charge the phone. The use of third-party products may decrease the

performance of your phone and/or pose a risk to your health or safety.

4 Sony Ericsson recommends that you never mix the use

the new USB charger and the old non-USB charger. The phone with new-type charger in box cannot be charged with the old-type charger, and vice versa. The use of both

the chargers may decrease the performance of your phone and/or pose a risk to your health or safety.

You can use the phone during charging. You can charge the battery for more or less than 2.5 hours. Interrupted charging will not damage the battery.

This is the Internet version of the user's guide. © Print only for private use.

Turn the phone on

To turn on the phone

1 Press and hold down . 2 Enter your PIN if requested.

To correct mistakes, press

3 Select OK. 4 Select a language. 5 At first start-up, select Yes to

use the setup wizard to make a phone setup. Select No to use the setup wizard later.

After you have turned the phone on and entered your PIN, the name of your operator appears on the screen. This view or screen is called standby. You can now make and receive calls.

To turn off the phone

• Press and hold down .

To use the setup wizard

• From standby select Menu > Settings > General > Setup

wizard > Basic setup.

This is the Internet version of the user's guide. © Print only for private use.

SIM card

The SIM (Subscriber Identity Module) card, which you get from your network operator, contains information about your subscription. Always turn off your phone and detach the charger before you insert or remove the SIM card.

You can save contacts on the SIM card before removing if from your phone. Contacts may also be saved in the phone memory. See Contacts on page 18.

PIN code (SIM card lock)

The PIN (Personal Identification Number) code is a SIM card lock that protects your subscription, but not the phone itself. If the card is locked, you have to enter the PIN code when you turn on your phone. Each PIN digit appears as *, unless it starts with emergency number digits, for example, 112 or 911. You can call an emergency number without entering a PIN.

If you enter the wrong PIN three times in a row, the following message appears: PIN blocked. To unblock, enter your

PUK code provided by your network operator.

To unblock your SIM card, see Loc ks on page 42.

This is the Internet version of the user's guide. © Print only for private use.

Menu overview

Calls Internet Games

Camera Messaging File manager

Write new Inbox Call voicemail Drafts Outbox Sent messages Saved messages Templates Settings

Camera album Pictures Ringtones Themes Bookmarks Games Applications Other

Organizer Contacts Settings

Online services Alarm Applications Calendar Tasks Notes Calculator Timer Stopwatch

Some menus and icons described in this document may vary depending on operator, network or subscription. Some options may vary when the default settings are changed.

This is the Internet version of the user's guide. © Print only for private use.

Options New contact

General Sounds & alerts Display Calls Connectivity

Phone overview

Network coverage

Function for left selection key

Internet key Navigation key

Left selection key

Camera key

Back key

Charging (USB connector)

Microphone

This is the Internet version of the user's guide. © Print only for private use.

Calls Menu

Battery status

Function for right selection key

Right sele ction key

Volume buttons

C key (Clear) On/off key

Infrared port

Network coverage

The network bars show the strength of the GSM network. Move to another location if you have network problems. No netw.

coverage means you are out of range.

= Good network coverage

= Average network coverage

Battery status

= The phone battery is fully charged

= The phone battery is empty

The outside

Camera lens

Icon display

This is the Internet version of the user's guide. © Print only for private use.

Icons

These icons may appear in your phone.

Icon Description

Battery charging, appears with battery icon.

You have missed a call. See Calling on page 16.

The phone is set to silent.

You have received a new text message.

You have received a new picture message.

Ongoing call.

Divert calls is activated.

An alarm is activated.

The loudspeaker is on.

The infrared port is activated.

The stopwatch is activated.

This is the Internet version of the user's guide. © Print only for private use.

Shortcuts

From standby you can use the navigation keys to go directly to a function:

• Press to start the camera.

• Press to write a message.

• Press to go to your contacts.

To change a standby shortcut, go to Menu

General > Shortcuts. The camera shortcut cannot be

changed.

To navigate the menus

• From standby select Menu and press

, , or .

• Press to go back one step

in the menu.

• Press and hold down to return to

standby.

• Press or to move between tabs.

To delete items

• Press .

To set the phone to silent

• Press and hold down to set silent mode on or off.

To view tips and tricks

• From standby select Menu > Settings > General > Setup

wizard > Tips and tricks.

> Settings

Messaging

Your phone supports various messaging services.

See Entering text on page 31 for instructions on how to enter text and numbers.

Text messages

You need a service centre number from your network operator to be able to send text messages.

To view and set the service centre number

1 From standby select Menu > Messaging > Settings

> Text message > Service centre.

2 If there is no number, select New ServiceCentre, enter the

number including the international “+” prefix and country/ region code. Select Save.

To write and send a text message

1 From standby select Menu > Messaging > Write new

> Text message.

2 Write the message and select Continue. 3 Select Enter phone no., enter the number and select OK. 4 Select Send.

Picture messages

Picture messages can contain enhanced functionality with text, sound and pictures.

You need the correct Internet (MMS) settings in your phone. Go to www.sonyericsson.com/cn and request a text message with the settings or contact your network operator.

To create and send a picture message

1 From standby select Menu > Messaging > Write new

> Picture msg.

2 Select More and select an item to follow your message. 3 Write the message and select OK > Continue. 4 Select Enter phone no., enter the number and select OK. 5 Select Send.

To save an item in a picture message

1 In the message, select More > Save items. 2 Select an item and where to save it.

To delete all sent messages

1 From standby select Menu > Messaging > Sent messages. 2 Select More > Delete all msgs > Yes.

Automatic download

Select how to download your picture messages.

To select a download option

1 From standby select Menu > Messaging > Settings

> Picture message > Auto download.

2 Select an option:

• Always – automatic download.

• Ask in roaming – ask to download when not in home network.

• Not in roaming – do not download when not in home network.

• Always ask – ask to download.

• Off – new messages appear in the inbox as icons. Select

the message and select View to download.

Receiving messages

To view and save a message from the inbox

1 From standby select Menu > Messaging > Inbox. 2 Scroll to a message and select View. If you want to save

the message, select More > Save message > Saved

messages (SIM card) or > Templates (phone).

To delete messages from the inbox

1 From standby select Menu > Messaging > Inbox. 2 Select More > Delete all msgs > All > Yes to delete all

messages. To delete one message, scroll to the message a nd select More > Delete > Yes.

+ 33 hidden pages