Sony XS-L1250G, XS-L1050G Connections

Specifications

3-866-689-01(1)

Speaker

Maximum input power Rated input power Impedance Sensitivity Frequency response Mass

Dimensions

XS-L1260G ø 294 ø 310 ø 280 122

XS-L1050G ø 243 ø 258 ø 232 109

XS-L1260G

Woofer 30 cm (12 in.), cone type 450 watts 150 watts 2 ohms + 2 ohms 89 dB/W/m 20 – 3,000 Hz Approx. 5.5 kg (11 lb. 2 oz.) per speaker

8 – ø6.5

/L1250G (11

XS-L1250G

Woofer 30 cm (12 in.), cone type 450 watts 150 watts 4 ohms 89 dB/W/m 20 – 3,000 Hz Approx. 5.5 kg (11 lb. 2 oz.) per speaker

XS-L1250G/L1050G XS-L1260G

ABCD

/8“) (12 1/4“) (11 1/8“) (4 7/8“)

/8“) (10 1/4“) (9 1/4“) (4 3/8“)

XS-L1050G

Woofer 25 cm (10 in.), cone type 400 watts 120 watts 4 ohms 88 dB/W/m 25 – 3,500 Hz Approx. 3.7 kg (8 lb. 3 oz.) per speaker

Unit: mm (in.)

Subwoofer

Installation/Connections

XS-L1260G/L1250G/L1050G

Sony Corporation  1999 Printed in TAIWAN, R.O.C.

Connections

Subwoofer

Power

amplifier

XS-L1260G/L1250G/L1050G

Car Audio

Electronic

crossover network

Power

amplifier

Right

Speaker system

Left

Installation

Precautions

•Be careful not to overload the speaker system beyond its power handling capacity.

•Keep recorded tapes, watches, and credit cards with magnetic coding, etc. away from the speaker system to prevent damage caused by the magnets in the speakers.

• When installing the unit, be careful not to damage the diaphragm by hand or tools.

•The subwoofer is heavy, so attach it firmly to a solid, thick, base plate or metal board.

•When using a parallel connection (speaker impedance: 1 ohm) for the XS-L1260G speaker system, the connected power amplifier shuld support an output of 1 ohm impedance.

1 2

XS-L1050G: ø245 (9 3/4“) XS-L1260G/XS-L1250G:

ø 282 (11

/8“)

Unit: mm (in.)

When connecting the speaker cords, be sure to match the polarities of the speaker cords and the terminals on the speakers correctly; referr to the ] and } marks engraved on the speaker terminal tab.

Parts list

Red ring: ] Black ring: }

Speaker cord (not supplied)

Speaker cord

123

ø5 × 25

× 8

Example

ø 3.2 (1/8“)

When using the XS-L1260G speaker system, you can connect the speaker cords by using either of the two connection methods, a parallel or serial connection as illustrated below.

Parallel connecion (Speaker impedance: 1 ohm)

to Power amplifier

Serial connection (Speaker impedance: 4 ohms)

to Power amplifier