• Safety information, remote control, troubleshooting, wall-mount
installation, specification, etc.
Help Guide (On screen Manual)
• Settings, functions, Internet
connection, troubleshooting,
etc.
• To open it, press the HELP
button on the remote control
and select Help Guide.
Setting menus are subject to change without notice.
IMPORTANT - Read the End User Software License
Agreement before using your Sony product. Using your
product indicates your acceptance of the End User
Software License Agreement. The software license
agreement between you and Sony is available online at
Sony website (https://www.sony.net/
tv-software-licenses/) or on your product screen. Press
(Quick Settings) on the remote control and select
[Settings] t [System] t [About] t [Legal information]
t [End user license agreement].
Note
• Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the
actual product.
The 75" class has a 74.5 inch (189.3 cm) viewable image
size, the 65" class has a 64.5 inch (163.9 cm) viewable
image size, the 55" class has a 54.6 inch (138.8 cm)
viewable image size and the 50" class has a 49.5 inch
(125.7 cm) viewable image size (measured diagonally).
Location of the identification label
Labels for the TV Model No. and Power Supply rating are
located on the rear of the TV.
• You can refer to the Help Guide with your
smartphone.
IMPORTANT NOTICE
Owner’s Record
The model and serial numbers are located at the side
and/or rear of the TV. Record these numbers in the
spaces provided below. Refer to them whenever you call
upon your Sony dealer regarding this TV.
Model Name
Serial No.
IMPORTANT NOTICE FOR MEXICO
Operation of this equipment is subject to the following two
conditions: (1) it is possible that this equipment or device
may not cause harmful interference and (2) this equipment
or device must accept any interference, including
interference that may cause undesired operation.
For information related to the certificate number, refer to
the package label and / or product.
Note: This product uses the following module for wireless
functionalities:
Model: DHUR-SY63
Brand: Wistron NeWeb Corporation
CAUTION
To prevent electric shock and blade exposure, do not use
this AC plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted.
• Operate the TV only on 110 V – 240 V AC (U.S.A./Canada
120 V AC).
Note
• This television includes a QAM demodulator which should
allow you to receive unscrambled digital cable television
programming via subscription service to a cable service
provider. Availability of digital cable television
programming in your area depends on the type of
programming and signal provided by your cable service
provider.
US
2
Safety Information
US
Notice for customers in the United States
of America
Supplier’s Declaration of Conformity
Trad e Nam e: SO NY
Model: XR-75X90J / XR-75X90CJ / XR-65X90J /
XR-65X90CJ / XR-55X90J / XR-55X90CJ / XR-50X90J
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Safety and Regulatory
5 GHz bands are restricted to indoor operations only.
Notice for customers in Canada
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Notice for customers in the United States
of America and Canada
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
Compatible Wall-Mount Bracket
Information
Use the following Sony Wall-Mount Bracket with your TV
model.
Sony TV Model No.
XR-75X90J / 75X90CJ / 65X90J /
65X90CJ / 55X90J / 55X90CJ
Sony Wall-Mount
Bracket Model No.
Use with other Wall-Mount Brackets*2 may cause instability
and could result in property damage or injury.
*1 Only on limited region/country/TV model.
*2 For instructions on using the Wall-Mount Bracket with
your TV please go to https://www.sony.com/am/
support for your TV model and download “Wall-Mount
Bracket”.
SU-WL855*
1
To C ustomers
Sufficient expertise is required for TV installations. Be sure
to subcontract the installation to a Sony dealer or licensed
contractor and pay adequate attention to safety during the
installation.
Before setting up your TV
Some TV models are packaged with a detached Table-Top
Stand so you can mount your TV to a wall right away. See
“Installing the TV to the Wall” if you want to mount the TV
to a wall. If you are not mounting the TV to a wall, you will
need to attach the Table-Top Stand (refer to the Setup
Guide).
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger
size TVs require two or more people.
• Correct hand placement while carrying the TV is very
important for safety and to avoid damage.
• Ensure your TV has adequate ventilation, refer to the
safety documentation.
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and
floor materials.
• Avoid moving the TV from a cold area to a warm area.
Sudden room temperature changes may cause moisture
condensation. This may cause the TV to show poor
picture and/or poor color. Should this occur, allow
moisture to evaporate completely before powering the TV
on.
US
3
Securing the TV
Angle brace
(not supplied)
Stand
12
4
VS
M6 machine screw
(not supplied)
Rope or chain (not
supplied)
Screw (not supplied)
1.5 N·m
{15 kgf·cm}
Screw hole on the rear cover
(supplied)
VS
10 mm – 12 mm
Screw (M6)
Rope or chain
Wall-mount holes
Rope or
chain (not
supplied)
M6 eye bolts (not supplied)
(supplied)
Sony strongly recommends tak ing
measures to prevent the TV from
toppling over.
Unsecured TVs may topple and result in
property damage, serious bodily injury
or even death.
Preventing the TV from Toppling
• Secure the TV to a wall and/or Stand.
• Do not allow children to play or climb on furniture and TV
sets.
• Avoid placing or hanging items on the TV.
• Never install the TV on:
slippery, unstable and/or uneven surfaces.
furniture that can easily be used as steps, such as a
chest of drawers.
• Install the TV where it cannot be pulled, pushed, or
knocked over.
• Install the TV so that the TV’s Table-Top Stand does not
protrude out from the Stand (not supplied). If the
Table-Top Stand protrudes out from the Stand, it may
cause TV set to topple over, fall down, and cause personal
injury or damage to the TV.
• Route all AC power cords and connecting cables so that
they are not accessible to curious children.
Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the Stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV’s rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
US
4
3 Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope).
VS
Please refer to below illustration for M6 eye bolt length.
Wall-anchor
(not supplied)
VS
10 mm – 12 mm
TV’s rear cov er
M6 eye
bolt
US
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
The BRAVIA® 4K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV
opens the door to the “4K TV Experience”. This
document will help you get the most out of your TV.
Please take a moment to register your TV at:
Now that you have made the best selection in LED
backlit LCD TV technology, be sure to remove all of
the accessories from the packaging before setting up
your TV.
2 Source
To experience the stunning detail of your BRAVIA TV,
you need access to HD programming.
• Upgrade your signal or content source to
high-definition (4K) by contacting your HD service
provider.
• Bring the astonishing resolution of your Sony 4K
Ultra HD TV to life with Sony 4K Ultra HD Blu-ray
Player. (The availability depends on region)
• Receive over-the-air HD broadcasts with an
HD-quality antenna connected directly to the back
of your TV.
Visit https://www.antennaweb.org for more
information on antenna selection and setup.
• Discover the wealth of entertainment now available
on super-high resolution Blu-ray Disc™ player and
other Sony HD equipment.
3 Sound
Complete the high-definition experience with a
BRAVIA Sync™ surround sound system or A/V
receiver from Sony.
4 Setup
Install your TV and connect your sources. To help
assure the highest quality for your HD experience,
use Ultra High Speed HDMI (High-Definition
Multimedia Interface) cables.
This TV displays all video input signals in a resolution of
3840 dots × 2160 lines.
Note
• For details of supported formats, refer to the
“Specifications” in this manual.
• For supported PC formats, refer to the online Help Guide.
US
5
Remote Control and TV
ȭ
Ȭ
ȫ
Ȫ
Ȯ
ȩ
MIC
ȱȲ
The remote control shape, layout,
availability and function of remote
control buttons may vary depending on
your region/country/TV model/TV
settings.
GUIDE: Display the digital program
guide of TV or Cable/Satellite box*3.
DVR: Display the Rec list of DVR*
3
INPUT: Display and select the input
source, etc.
(Quick settings): Display Quick
Settings.
BACK
HOME
VOL +/– (Volume)
JUMP
4
MUTE*
CH +/– (Channel)
AUDIO: Select the sound of
multilingual source or dual sound
(depend on program source).
SUBTITLE/CC
Display the Help menu.
HELP:
///
REC:
Record the currently viewed
program on DVR*3.
DISPLAY: Display information.
.
(Google Assistant): Use Google
Assistant*1*2. For hints on how to
control your TV, press the Google
Assistant button on the remote control
and say “voice hints”.*
////: On screen menu
navigation and selection.
1
TV: Display TV channel list or switch to
input.
(Power)
Number buttons
(dot)
APPS
YouTube™ / NETFLIX / Disney+ /
Prime Video / Color buttons
US
6
BUILT-IN MIC SWITCH*
the built-in MIC.
(Power)
Remote Control sensor / Light
1
: Turn on/off
sensor / LED
Built-in MIC*
built-in MIC, press the Google Assistant
button on the remote control and
follow the on-screen instructions.
*1 Only on limited region/country/TV model/
language.
*2 Google Assistant requires an Internet
connection.
*3 [Cable/Satellite box setup] setting is required.
*4 Accessibility shortcut is available by pressing
and holding MUTE.
*5 Power consumption will increase when the
built-in MIC is enabled as it is always listening.
1*2*5
: To e n able the
For more information,
VS
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
US
refer to the Help Guide.
Guidelines for IR Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
Wall-Mount Bracket Installation
Information
For instructions on Wall-Mount Bracket
installation, see the Installation Information
(Wall-Mount Bracket) on the Sony Customer
Support website for your TV model at the
following address.
https://www.sony.com/am/support
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• Sony is not liable for any damage or injury
caused by mishandling or improper
installation.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Installing the TV to the Wall
Using the optional Wall-Mount Bracket
(SU-WL855 only)* (not supplied)
To Customers:
For product protection and safety reasons,
Sony strongly recommends that installation
of your TV be performed by Sony dealers or
licensed contractors. Do not attempt to
install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the
installation, periodic maintenance and
examination of this product.
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
* Only on limited region/country/TV model.
Using the optional Wall-Mount Bracket
(Except SU-WL855) (not supplied)
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see “Detaching the Table-Top Stand
from the TV”.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
7
US
For product protection and safety
VS
10 mm – 12 mm
Screw (M6)
Wall-Mount Bracket
VS
{15 kgf·cm}
1.5 N·m
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
• Refer to the following table for
wall-mount hole pattern.
Wall-mount hole
Model Name
XR-75X90J /
75X90CJ
XR-65X90J /
65X90CJ
XR-55X90J /
55X90CJ
XR-50X90J200 × 200 mm
pattern
×
300 × 300 mm
300 × 300 mm
300 × 300 mm
• For more detailed information, visit Sony
Customer Support website.*
* Only on limited region/country/TV model.
1 Remove the screws from the rear of
the TV.
2 Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
US
8
3 Attach the Wall-Mount Bracket (not
Screw (not
supplied)
Wall-Mount Bracket
(not supplied)
US
supplied) using the screws (not
supplied).
Note
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount
Attachment when attaching them to the TV.
Use only a flat head screwdriver to install
the Wall-Mount Attachment. Use of another
tool might result in over torqueing the
Wall-Mount Attachment and damaging the
TV.
Detaching the Table-Top Stand from
the TV
1 Remove one side of the Table-Top
Stand at a time. Firmly hold the
Table-Top Stand securely with both
hands while the other people lift up
the TV.
2 Repeat the previous step and
remove the other side of the
Tab l e -Top Sta n d .
Note
• Three or more people are required to detach the
Table-Top Stand.
• Be careful not to use excessive force while
detaching the Table-Top Stand from the TV as it
may cause the TV set to fall resulting in personal
injury or physical damage to the TV.
• Take care when handling the Table-Top Stand to
prevent damage to the TV.
• Be careful when lifting the TV as the Table-Top
Stand is detached, the Table-Top Stand may
topple over and cause personal injury.
• Take care when removing the Table-Top Stand
from the TV to prevent it from falling over and
damaging the surface that the TV is sitting on.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• Be sure the TV is vertical before turning on. To
avoid uneven picture uniformity do not power
on the TV with the LCD panel facing down.
9
US
Troubleshooting
General troubleshooting for issues like:
black screen, no sound, frozen picture, TV
does not respond, or network is lost, do the
following steps.
1 Restart your TV by pressing the power
button on the remote control for about
five seconds. The TV will restart. If the TV
does not recover, try unplugging the AC
power cord then press the power button
on the TV and release it. Wait for two
minutes, and plug in the AC power cord.
Or, press the power button on the TV for
about 40 seconds until the TV turns off.
2 Refer to the Help menu by pressing HELP
on the remote control.
3 Connect your TV to the Internet and
perform a software update. Sony
recommends you to keep your TV
software updated. Software updates
provide new features and performance
improvements.
4 Visit Sony support website (information
provided at the end of this manual).
5 Perform the factory data reset.
When you plug in the TV, the TV may not
be able to turn on for a while even if you
press the power button on the remote
control or the TV.
It takes time to initialize the system. Wait
for about one minute, then operate it
again.
How to reset the TV to factory settings
WARNING: The reset will clear all of your
customized settings including the parental
lock setting.
• You can reset the TV to factory settings by
selecting [Factory data reset]. How to
select [Factory data reset], refer to the
online Help Guide.
• To force factory data reset, unplug the AC
power cord. Press and hold button on
the TV, then plug in the AC power cord.
• For security purposes, be sure to remove
all personal and account information
before discarding, selling or passing your
TV to someone else by: unlinking/
unregistering, signing out of and
deactivating all network services as well
as factory reset the TV.
The remote control does not function.
• Replace the batteries.
The parental lock password has been
forgotten.
• Enter 4357 for the PIN and enter the new
PIN.
The restricted profile password has been
forgotten.
• Perform the force factory data reset.
For more information on
troubleshooting, refer to
the Help Guide.
Specifications
System
TV system: Depend on your country/area
selection/TV model
NTSC: American TV Standard
ATSC (8VSB Terrestrial): ATSC compliant
8VSB
NEXTGEN TV: ATSC 3.0 compliant (Single
tuner)
QAM on cable: ANSI/SCTE 07 2000 (Does
not include CableCARD functionality)
Channel coverage: Depend on your
country/area selection/TV model
Analog terrestrial: 2 – 69 / Digital
terrestrial: 2 – 69*
Analog Cable: 1 – 135 / Digital Cable:
1 – 135
Panel system: LCD (Liquid Crystal Display)
Panel, LED Backlight
Speaker output: 10 W + 10 W
Wireless technology
Protocol IEEE 802.11a/b/g/n/ac
Bluetooth® Version 4.2
eARC/ARC (Enhanced Audio Return
Channel/Audio Return Channel) (HDMI IN 3
6
only)*
In eARC mode
Refer to the online Help Guide for
details.
In ARC mode
Two channel linear PCM: 48 kHz 16 bits,
Dolby Audio, Dolby Atmos, DTS
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear
PCM: 48 kHz 16 bits, Dolby Audio, DTS)
(Stereo mini jack)
Headphone
1, 2
USB port 1 supports High Speed USB
(USB 2.0)
USB port 2 supports Super Speed USB
(USB 3.1 Gen 1)
LAN
10BASE-T/100BASE-TX connector
(Depending on the operating
environment of the network, connection
speed may differ. The communication
rate and quality are not guaranteed.)
Home Network supported files and
4
formats*
REMOTE
RS-232C mini jack, IR IN mini jack
These jacks are for receiving the external
control signal.
Power and others
Power requirements
110 V – 240 V AC, 50/60 Hz (U.S.A./
Canada 120 V AC, 60 Hz)
Power consumption
In use
XR-75X90J / 75X90CJ: 304 W
XR-65X90J / 65X90CJ: 240 W
XR-55X90J / 55X90CJ: 197 W
XR-50X90J: 159 W
In standby*7*
8
Less than 0.5 W with 120 V AC and less
than 0.5 W with 240 V AC
Screen size (measured diagonally) (Approx.)
XR-75X90J / 75X90CJ: 189.3 cm /
74.5 inches (75" class)
XR-65X90J / 65X90CJ: 163.9 cm /
64.5 inches (65" class)
XR-55X90J / 55X90CJ: 138.8 cm /
*1 2 – 36 for NEXTGEN TV scanning range in U.S.A.
*2 When 4096 × 2160p is input and [Wide mode]
is set to [Normal], the resolution is displayed as
3840 × 2160p. To display 4096 × 2160p, set
[Wide mode] setting to [Full 1] or [Full 2].
*3 Refer to the on screen menu to set [HDMI
signal format].
*4 Refer to the online Help Guide for details.
*5 HDMI IN 3 & 4 only. Use the Ultra High Speed
HDMI Cable to connect.
*6 Connect your audio system to the HDMI IN 3 to
route TV audio to your audio system.
*7 Specified standby power is reached after the
TV finishes necessary internal processes.
*8 Standby power consumption will increase
when your TV is connected to the network.
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to change
without notice.
• Subscriptions for services and applications may
be required and additional terms, conditions
and/or charges may apply when using Google
Assistant.
• Gracenote, the Gracenote logo and
logotype, “Powered by Gracenote” logo
are either registered trademarks or
trademarks of Gracenote, Inc. in the
United States and/or other countries.
• Google TV and related logos are
trademarks of Google LLC.
• Netflix is a registered trademark of Netflix,
Inc.
• TUXERA is a registered trademark of
Tuxera Inc. in the US and other countries.
• All other trademarks are the property of
their respective owners.
Licensing Information
• The terms HDMI, HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks
of HDMI Licensing Administrator, Inc.