Dismantling Information forUse
by ProfessionalRecyclers
ORIGINAL MANUAL ISSUE DATE: 2021.03
Model:
XR-55A90J
XR-65A90J
XR-83A90J
9-888-790-43
Conditions of Use:
(1) Please use this information only for the purpose of performing repair and recycling Sony products. Using this information
for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part
without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-todate before using it.
OLED
Sony EMCS (M) Sdn. Bhd., HES-M
© 2021.05
MODEL LISTS
Model Remote Destination
XR-55A90J
XR-65A90J
XR-83A90J
RMF-TX621E CEI , UKA, CEP
RMF-TX621E CEI, UKA, CEP
RMF-TX621E
CEI, UKA
Remote
1 LIST OF ITEMS TO BRING
1. Screwdriver (e.g., #2 Phillips Screwdriver)
2. Multimeter
3. ESD Wrist Straps
4. Metal Washer (Flat) or Coin (for remove Rear Cover)
5. Ruler (for remove Rear Cover)
6. Service Manual (Unique) (for remove & replace details)
2 OPTIONAL EQUIPMENT
1. Screwdriver (e.g., #0 Phillips Screwdriver)
2. Parts Tray for loose screws and small items
TOOLS & EQUIPMENT
Thickness: approx. 1.5mm
Diameter: 20~25mm
(wrap in tape (L=50mm))
2. Flashlight
3. Service Manual (Common) (for t/shooting information)
For Surface Mounted Parts/Connectors:
Hot-Air Type soldering Iron is needed.
Plastic or Metal Ruler
(In case of Metal ruler, wrap in tape
(L=50mm) for prevent scratches)
3
DISSASSEMBLY AND REMOVAL CAUTION 55”
4
DISSASSEMBLY AND REMOVAL CAUTION 55”
5
XR-55A90J
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
• and shaded parts are critical for safety. Replace only with part num ber specified
!
• Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and / or replaced
EXPL ODED VI EW & PART LIS TS
24
22
19
8
11
5
21
17
15
27
28
29
14
16
20
19
7
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated
when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
Slide, Clamp (mini) Slide, Clamp
15
28
1
12
13
6
Spacer
23
Stand
30
31
2526
4
18
2
3
9
10
6
HARNESS/CABLES 55”
1
2
5
4
9
6
7
REF. NO PART NO. DESCRIPTION REMARKS
1
2 1-010-567-11
3
4
5
6 1-010-617-11
7
8
9
1-010-566-11
1-972-625-11
1-010-613-11
1-010-615-11
1-010-619-11
1-007-229-11
1-010-568-11
CONNECTOR ASSY 30P CN6401(PSU)-CN1700(B)-CN8(TCON)(1)
CONNECTOR ASSY 20P CN6601(PSU)-CN6(TCON)(1)
CONNECTOR ASSY 4P
FLEXIBLE FLAT CABLE 20P
CN6605(B)-CIN(1)
CN3803(B)-BT(1)
FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
FLEXIBLE FLAT CABLE 51P
HARNESS ASSY (KEY)
CN6800(B)-CN5(TCON)(1)
CN5402(B)-KEY(1)
HARNESS ASSY(SP) TSP-CN5404(B)-CN6603(B)-SP(1)
3
8
7
PARTS LIST 55”
REF. NO PART NO. DESCRIPTION
14
17
22 1-010-552-11
29
A-5028-583-A
A-5026-251-A COMPL SVC BM5S21_AS_EUUK
A-5026-950-A P-MOD (YDBO055UTG01)(SVC)
1-912-832-11
1-002-007-11
1-001-115-12
TSP COMPL
G17 - STATIC CONVERTER(TV)
POWER-SUPPLY CORD SET(EU)
C17 AC CORD SET(SWISS)
POWER-SUPPLY CORD SET(UK)
REMARKS
CEI, CEP
CEI, CEP
UKA
Printed Circuit Board, incl. capacitors
Printed Circuit Board, incl. capacitors
Internal Power Supply
OLED
Cable
8
DISSASSEMBLY AND REMOVAL CAUTION 65”
9
DISSASSEMBLY AND REMOVAL CAUTION 65”
10
XR-65A90J
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
• and shaded parts are critical for safety. Replace only with part num ber specified
!
• Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and / or replaced
EXPL ODED VI EW &
PART LI STS
24
22
8
15
29
11
14
21
5
17
20
27
28
28
16
7
19
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated
when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
Slide, Clamp (mini) Slide, Clamp
15
1
12
13
Spacer
23
26
31
Stand
30
25
4
2
3
18
10
9
6
11
HARNESS/CABLES 65”
1
2
4
5
9
6
7
REF. NO PART NO. DESCRIPTION REMARKS
1
2
3 1-972-625-11
4
5
6
7 1-010-619-11
8
9
1-010-566-11
1-010-567-11
1-010-613-11
1-010-615-11
1-010-617-11
1-007-232-11
1-010-569-11
CONNECTOR ASSY 30P CN6401(PSU)-CN1700(B)-CN8(TCON)(1)
CONNECTOR ASSY 20P CN6601(PSU)-CN6(TCON)(1)
CONNECTOR ASSY 4P CN6605(B)-CIN(1)
FLEXIBLE FLAT CABLE 20P CN3803(B)-BT(1)
FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1)
HARNESS ASSY (KEY) CN5402(B)-KEY(1)
HARNESS ASSY(SP) TSP-CN5404(B)-CN6603(B)-SP(1)
3
8
12
PARTS LIST 65”
REF. NO PART NO. DESCRIPTION
14
17
22
29
A-5028-583-A
A-5026-251-A COMPL SVC BM5S21_AS_EUUK
1-010-552-11
A-5026-951-A P-MOD (YDBO065UTG01)(SVC)
1-912-832-11
1-002-007-11
1-001-115-12
TSP COMPL Printed Circuit Board, incl. capacitors
G17 - STATIC CONVERTER(TV) Internal Power Supply
POWER-SUPPLY CORD SET(EU)
C17 AC CORD SET(SWISS)
POWER-SUPPLY CORD SET(UK)
REMARKS
CEI , CEP
CEI , CEP
UKA
Printed Circuit Board, incl. capacitors
OLED
Cable
13
DISSASSEMBLY AND REMOVAL CAUTION 83”
14
DISSASSEMBLY AND REMOVAL CAUTION 83”
15
XR-83A90J
• Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
• and shaded parts are critical for safety. Replace only with part num ber specified
!
• Parts contain confidential inform ation. Strictly follow the instruction whenever the components are repaired and / or replaced
EXPL ODED VI EW & PART LIS TS
32
31
30
17
34
33
4
2
5
18
15
14
1
3
19
19
24
23
21
20
25
9
22
13
29
28
27
26
10
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated
when ordering these components.
Picture provided in this section might have slight difference from the actual sets.
The reference number beside the part indicates the disassembly sequence.
Remove screws before disassem bly. Unplug connectors before disassembly
35
38
6
7
8
40
Stand
11
12
16
39
36
37
16
HARNESS/CABLES 83”
REF. NO PART NO. DESCRIPTION REMARKS
1
2
3
4
5
4
3
2
11
1
6
7
12
10
5
6
7
8
9
8
9
10
11
12
1-010-574-11
1-010-571-11
1-010-573-11
1-010-572-11
1-010-611-11
1-010-625-11
1-010-626-11
1-010-623-11
1-010-621-11
1-010-570-11
1-010-575-11
1-972-625-11
CONNECTOR ASSY 10P CN6603(B)-SP(1)
CONNECTOR ASSY 20P CN6401(PSU)-CN1700(B)(1)
CONNECTOR ASSY 14P CN6402(PSU)-CN6602(PSU)-CN8(TCON)(1)
CONNECTOR ASSY 28P CN6601(PSU)-CN6(TCON)-CN14(TCON)(1)
CONNECTOR ASSY 2P
CN6501(PSU)-CN6503(PSU)-CN6502(PSU)-
CN6504(PSU)(1)
FLEXIBLE FLAT CABLE 41P CN6801(B)-CN7(TCON)(1)
FLEXIBLE FLAT CABLE 51P CN6800(B)-CN5(TCON)(1)
FLEXIBLE FLAT CABLE 25P CN1200(B)-CN102(H)(1)
FLEXIBLE FLAT CABLE 20P CN3803(B)-BT(1)
CONNECTOR ASSY 3P CN5402(B)-KEY(1)
CONNECTOR ASSY 5P CN5404(B)-TSP(1)
CONNECTOR ASSY 4P CN6605(B)-CIN(1)
17
PARTS LIST 83”
REF. NO PART NO. DESCRIPTION
18
25
30
33
38
A-5028-583-A
A-5026-251-A COMPL SVC BM5S21_AS_EUUK
A-5026-251-A
1-010-554-11
1-011-756-11
1-912-832-11
1-001-115-12
TSP COMPL
G18 - STATIC CONVERTER(TV)
G19 - STATIC CONVERTER(TV)
OLED PANEL(L83APB1)
POWER-SUPPLY CORD SET(EU)
POWER-SUPPLY CORD SET(UK)
REMARKS
Printed Circuit Board, incl. capacitors
Printed Circuit Board, incl. capacitors
Internal Power Supply
Internal Power Supply
OLED
Cable
Cable
18
9-888-790-43
Sony EMCS (M) Sdn. Bhd.
HES-M
English
© 2021.05
19
Loading...