Sony XR-65A90J Users guide

Television

https://rd1.sony.net/help/tv/
iga1/h_ga/

3

4

12

10 mm – 14 mm

M6 screw (not supplied)

Screw (not supplied)

Cord (not
supplied)

1.5 N·m
{15 kgf·cm}

9 mm – 13 mm

M6 screw (not supplied)

Screw (not supplied)

Cord (not
supplied)

1.5 N·m
{15 kgf·cm}

AV Re ceiver

Speaker cable

S-CENTER

OUT

HDMI
(eARC/ARC)
connection

TV centre
speaker
mode
cable

Ȫ

ȫ

Ȭ

ȭ

Ȯ

ȩ

MIC / Light
sensor*

1





ȱȲ

Reference Guide

5-024-543-12(1)

• When transporting the TV set for repairs or when moving, pack it using
the original carton and packing material.

Top p l e pr eve n t ion
(Models with supplied support belt kit)

Refer to the Setup Guide on top of the cushion.
The supplied wood screw is only for affixing to a solid object made of
wood.

(Except models with supplied support belt kit)

XR-83A90J

Using TV as Part of Audio System

Note

• Before connecting cables, disconnect the AC power cord
(mains lead) of both TV and AV receiver.

• Refer to the instruction manual of the Audio system with
S-CENTER OUT terminal for detail.

XR-83A90J / 65A90J / 55A90J

About Manuals

This TV comes with the following manuals. Please retain the manuals for future reference.

Setup Guide

• TV installation and setup.

Reference Guide (this manual) / Safety Documentation

• Safety information, remote control, troubleshooting, wall-mount installation, specification,
etc.

Help Guide (On screen Manual)

• Settings, functions, Internet connection,
troubleshooting, etc.

• To open it, press the HELP button on the
remote control and select Help Guide.

Setting menus are subject to change without notice.

IMPORTANT - Read the End User Software Licence Agreement before
using your Sony product. Using your product indicates your acceptance

of the End User Software Licence Agreement. The software licence
agreement between you and Sony is available online at Sony website
(https://www.sony.net/tv-software-licenses/) or on your product
screen. Press (Quick Settings) on the remote control and select
[Settings] t [System] t [About] t [Legal information] t [Notices and
licences].

Note

• Before operating the TV, please read the “Safety Information”.

• Read the supplied safety documentation for additional safety
information.

• Instructions about “Installing the TV to the Wall” are included within this
TV’s instruction manual.

• Images and illustrations used in the Setup Guide and this manual are for
reference only and may differ from the actual product.

Location of the identification label

Labels for the TV Model No. and Power Supply rating are located on the
rear of the TV. They can be found by removing the terminal cover.

Safety Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below in
order to avoid any risk of fire, electric shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC power outlet
(mains socket).

• Place the TV set on a stable, level surface to prevent it from falling over
and causing personal injury or property damage.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Install the TV so that the TV’s Table-Top Stand does not protrude out
from the TV stand (not supplied). If the Table-Top Stand protrudes out
from the TV stand, it may cause TV set to topple over, fall down, and
cause personal injury or damage to the TV.

• You can refer to the Help Guide with your
smartphone.

Tran spor ting

• Before transporting the TV set, disconnect all cables.

• Before transporting the TV set, remove the stand cover and terminal
covers.

• Two or more people (three or more people for XR-83A90J) are needed to
transport a large TV set.

• When transporting the TV set by hand, hold it as shown below. Do not
put stress on the panel and the frame around the screen.

XR-83A90J

XR-65A90J / 55A90J XR-83A90J / 65A90J / 55A90J

• When handling or mounting the TV set, do
not lay down the TV.

• When transporting the TV s et, do not subject it to jolts or excessive
vibration.

XR-65A90J / 55A90J

12

3

4

Protecting the TV Screen (OLED TV)

Precautions to Protect the Screen from Damage

Image retention

OLED TV’s are susceptible to image retention (burn-in) due to the
characteristics of the materials used. Image retention may occur if images
are displayed in the same location on the screen repeatedly or over
extended periods of time. This is not a malfunction of the TV. Avoid
displaying images that may cause image retention.

The following are examples of images that may cause
image retention:

• Content with black bars either on the top and bottom and/or the left and
right sides of the screen. (for example, Letterboxed, 4:3 screen, Standard
definition)

• Static images such as photos.

• Video games that might have static content in some part of the screen.

• On-screen menus, programme guides, channel logos etc.

• Static content f rom applications.

• On-screen tickers, such as those used for news and headlines.

To reduce the risk of image retention:

• Sony recommends that you turn off the TV normally by pressing the
power button on the remote control or the TV.

• Fill the screen by changing [Wide mode] to eliminate the black bars.
Select [Wide mode] other than [Normal].

• Turn off the OSD (On Screen Display) by pressing the / (Info/Text
reveal) button, and turn off the menus from connected equipment. For
details, refer to the instruction manuals for the connected equipment.

• Avoid displaying static images with bright colours (including white),
clocks or logos on any portion of the screen.

• Set the picture settings based on the ambient conditions. The Standard
Picture is recommended for home use and when viewing content that
often displays the station logos, etc.

The TV has following features to help reduce/prevent image retention.

Pane l re fresh

A panel refresh will adjust the panel uniformity. Panel refresh can be
performed and should only be used when image retention is very
noticeable.

Caution:

• The Panel refresh function may affect the panel. Do not perform Panel
refresh more than once a year as it may affect the usable life of the
panel.

• Panel refresh takes about one hour to complete.

• A white line may be displayed on the screen during the Panel refresh,
this is not a malfunction of the TV.

• Panel refresh will only work when the room temperature is between
10 ºC and 40 ºC.

Pixel shift

Automatically moves the image on the screen to prevent image retention.

Other feature

The screen brightness is automatically reduced when displaying still
images, clocks, bright colours or logos etc.

Using TV as Centre Speaker

Note

• Before connecting cables, disconnect the AC power cord

(mains lead) of both TV and AV receiver.

Remote Control and TV

The remote control shape, layout, availability and
function of remote control buttons may vary
depending on your region/country/TV model/TV
settings.

 (Microphone) / (Google Assistant): Use

Google Assistant*2*3 or voice search*3. For hints on
how to control your TV, press the microphone
button on the remote control and say “voice

2

hints”.*

////: On screen menu navigation and

selection.

TV: Display TV channel list or switch to input.

  (Power)

Number buttons

(dot)

 (Text):

 YouTube™ / NETFLIX*

Prime Video / Colour buttons

 GUIDE/ : Display the digital programme guide

of TV or TV box*5.

APPS

source, etc.

BACK
HOME

  +/– (Volume)

 (Mute)*

CH +/–//: Select the channel, or next () /

previous () page.

 AUDIO: Select the sound of multilingual source or

dual sound (depend on programme source).

HELP:
///
EXIT

  (Power)

(It can be found by removing the side cover
(XR-83A90J only).)

 BUILT-IN MIC SWITCH: Turn on/off the built-in

MIC. (It can be found by removing the side cover)

Built-in MIC*2*3*7: To enable the built-in MIC,



press the microphone button on the remote
control and follow the on-screen instructions.

Display text information.

4

/ YouTube Music /

(Input select):

Display and select the input

(Quick settings): Display Quick Settings.

(Jump)

6

(Subtitle setting)

Display the Help menu.

/ (Info/Text reveal):

Display information.

 Remote Control sensor / Ambient light

10 mm – 14 mm

Screw (M6)

Wall-Mount Bracket
TV’s rear cover

9 mm – 13 mm

Screw (M6)

Wall-Mount Bracket
TV’s rear cover

sensor / LED

*1 The remote control backlight will illuminate when the light

sensor detects the ambient light is low. Automatic

illumination of the backlight can be turned off.
*2 Only on limited region/country/TV model/language.
*3 Google Assistant or voice search requires an Internet

connection.
*4 Installation might be required depending on region/

country.
*5 [TV box setup] setting is required.
*6 Accessibility shortcut is available by pressing and holding

 (Mute).
*7 Power consumption will increase when the built-in MIC is

enabled as it is always listening.

For more information, refer to the
Help Guide.

Installing the TV to the Wall

Using the optional Wall-Mount Bracket (SU-WL850
or SU-WL450)* (not supplied)

To Customers:

For product protection and safety reasons, Sony
strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do
not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation,
periodic maintenance and examination of this
product.

Wall-Mount Bracket Installation Information

For instructions on Wall-Mount Bracket installation,
see the Installation Information (Wall-Mount Bracket)
on the product page for your TV model.
https://www.sony-asia.com/support

• Follow the instruction guide provided with the

Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially
to determine the strength of the wall for
withstanding the TV’s weight.

• Sony is not liable for any damage or injury caused by

mishandling or improper installation.

• Only qualified service personnel should carry out

wall-mount installations.

• For safety reasons, it is strongly recommended that

you use Sony accessories, including:
Wall-Mount Bracket SU-WL850 (XR-65A90J /

55A90J only)

Wall-Mount Bracket SU-WL450

• Be sure to use the screws supplied with the TV when

attaching the Wall-Mount Bracket to the TV set
(SU-WL850 only). Be sure to use the screws supplied
with the Wall-Mount Bracket when attaching the
Wall-Mount Bracket to the TV set (except SU-WL850).
The supplied screws are designed as indicated by
illustration when measured from the attaching
surface of the Wall-Mount Bracket.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model. Use of
screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.

XR-83A90J

XR-65A90J / 55A90J

• Be sure to store the unused screws and Table-Top

Stand in a safe place until you are ready to attach the
Table-Top Stand. Keep the screws away from small
children.

* Only on limited region/country/TV model.

Troubleshooting

General troubleshooting for issues like: black screen,
no sound, frozen picture, TV does not respond, or
network is lost, do the following steps.

1 Restart your TV by pressing the power button on

the remote control for about five seconds. The TV
will restart. If the TV does not recover, try
unplugging the AC power cord (mains lead) then
press the power button on the TV and release it.
Wait for two minutes, and plug in the AC power
cord (mains lead).
Or, press the power button on the TV for about 40
seconds until the TV turns off.

2 Refer to the Help menu by pressing HELP on the

remote control.

3 Connect your TV to the Internet and perform a

software update. Sony recommends you to keep
your TV software updated. Software updates
provide new features and performance
improvements.

4 Visit Sony support website (information provided at

the end of this manual).

When you plug in the TV, the TV may not be able to
turn on for a while even if you press the power
button on the remote control or the TV.

It takes time to initialize the system. Wait for about
one minute, then operate it again.

The remote control does not function.

• Replace the batteries.

The parental lock password has been forgotten.

• Enter 9999 for the PIN and enter the new PIN.

The screen becomes darker while watching TV.

• If the whole image or part of the image remains still,
the screen brightness will be gradually reduced to
prevent image retention. This is not a malfunction of
the TV.

You are concerned about image retention.

If the same image is displayed repeatedly or for long
periods of time, image retention may occur. To reduce
image retention, we recommend that you turn off the
TV normally by pressing the power button on the
remote control or the TV.

Note

• Perform Panel refresh only when image retention is
particularly noticeable. Avoid performing Panel refresh more
than once a year because it may affect the usable life of the
panel.

• Images that include clocks, logos and bright colours
(including white) easily cause image retention. Avoid
displaying these types of images for long periods of time,
otherwise image retention may occur.

A white line appears on the screen.

• The Panel refresh has been performed. A white line
may be displayed on the screen during the Panel
refresh. This is not a malfunction of the TV. Panel
refresh starts after the TV is turned off and takes
about one hour to complete.

The message [Panel refresh did not finish…] is
displayed.

When i) the TV is turned on, ii) the AC power cord
(mains lead) is unplugged, or iii) the room
temperature falls outside of the range between 10 ºC
and 40 ºC during the Panel refresh, the Panel refresh is
not completed. Please avoid the above three
conditions during the Panel refresh.

For more information on
troubleshooting, refer to the Help
Guide.

Specifications

System

Panel system: OLED (Organic Light Emitting Diode)
Pane l

TV system: Depend on your country/area selection/TV
model

Analogue: B/G, I, D/K, M
Digital: DVB-T/DVB-T2

Colour system: PAL/SECAM/NTSC3.58/NTSC4.43
Channel coverage: Depend on your country/area

selection/TV model

Analogue: UHF/VHF/Cable
Digital: UHF/VHF

Sound output: 20 W + 20 W + 10 W + 10 W
Wireless technology

Protocol IEEE 802.11a/b/g/n/ac
Bluetooth® Version 4.2

Input/Output jacks

Antenna (aerial)/cable

75 ohm external terminal for VHF/UHF

/ VIDEO IN / S-CENTER SPEAKER IN
Video/Audio input (mini jack)
S-centre speaker input (mini jack)

HDMI IN 1/2/3/4 (HDCP 2.3-compatible)

Video:

4096 × 2160p (50, 60 Hz)*1*2, 4096 × 2160p
(24 Hz)*1, 3840 × 2160p (50, 60 Hz)*2, 3840 × 2160p
(24, 25, 30 Hz), 1080p (30, 50, 60, 100, 120 Hz),
1080/24p, 1080i (50, 60 Hz), 720p (30, 50, 60 Hz),
720/24p, 576p, 480p, PC Formats*
3840 × 2160p (100, 120 Hz)*2*

Audio:

In eARC (Enhanced Audio Return Channel) mode

Refer to the online Help Guide for details.

Except eARC mode

5.1 channel linear PCM: 32/44.1/48/88.2/96/

176.4/192 kHz 16/20/24 bits, Dolby Audio, Dolby
Atmos, DTS

eARC/ARC (Enhanced Audio Return Channel/Audio
Return Channel) (HDMI IN 3 only)*

In eARC mode

Refer to the online Help Guide for details.

In ARC mode

Two channel linear PCM: 48 kHz 16 bits, Dolby
Audio, Dolby Atmos, DTS

DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM: 48 kHz
16 bits, Dolby Audio, DTS)

 (Stereo mini jack)

Headphone

1, 2, 3
USB port 1 and 2 support High Speed USB (USB 2.0)
USB port 3 supports Super Speed USB (USB 3.1 Gen 1)

LAN
10BASE-T/100BASE-TX connector (Depending on the
operating environment of the network, connection
speed may differ. The communication rate and
quality are not guaranteed.)

3

4

5

CENTER SPEAKER IN

Centre speaker input terminal

Power and others

Power requirements

XR-83A90J: 220 V – 240 V AC, 50/60 Hz
XR-65A90J / 55A90J: 110 V – 240 V AC, 50/60 Hz

Screen size (measured diagonally) (Approx.)

XR-83A90J: 83 inches / 209.6 cm
XR-65A90J: 65 inches / 163.9 cm
XR-55A90J: 55 inches / 138.8 cm

Power consumption

Indicated on the rear of the TV

Standby power consumption*

6*7

Jordan/UAE/Egypt: 0.50 W, Others: 0.5 W

Display resolution (horizontal × vertical) (pixels)

3840 × 2160

Output rating

500 mA (for USB 1/2), 900 mA (for USB 3)

Dimensions (Approx.) (w × h × d) (mm)

with Table-Top Stand

Standard position:
XR-83A90J: 1880 × 1072 × 428
XR-65A90J: 1502 × 834 × 317
XR-55A90J: 1282 × 709 × 317
Narrow position:
XR-83A90J: 1850 × 1099 × 428
Soundbar position:
XR-83A90J: 1880 × 1137 × 428
XR-65A90J: 1444 × 902 × 317
XR-55A90J: 1223 × 776 × 317

without Table-Top Stand

XR-83A90J: 1850 × 1067 × 53
XR-65A90J: 1444 × 833 × 41
XR-55A90J: 1223 × 709 × 41

Stand width (Approx.) (mm)

Standard position:

XR-83A90J: 1880
XR-65A90J: 1502
XR-55A90J: 1282

Narrow position:

XR-83A90J: 700

Soundbar position:

XR-83A90J: 1880
XR-65A90J: 1365
XR-55A90J: 1150

Mass (Approx.) (kg)

with Table-Top Stand

XR-83A90J: 43.5
XR-65A90J: 24.6
XR-55A90J: 20.3

without Table-Top Stand

XR-83A90J: 42
XR-65A90J: 22.5
XR-55A90J: 18.6

Others

Optional accessories

Wall-Mount Bracket: SU-WL850 (XR-65A90J / 55A90J
only)
Wall-Mount Bracket: SU-WL450

Operating temperature: 0 ºC – 40 ºC

*1 When 4096 × 2160p is input and [Wide mode] is set to

[Normal], the resolution is displayed as 3840 × 2160p. To
display 4096 × 2160p, set [Wide mode] setting to [Full 1] or

[Full 2].
*2 Refer to the on screen menu to set [HDMI signal format].
*3 Refer to the online Help Guide for details.
*4 HDMI IN 3 & 4 only. Use the Ultra High Speed HDMI Cable to

connect.
*5 Connect your audio system to the HDMI IN 3 to route TV

audio to your audio system.
*6 Specified standby power is reached after the TV finishes

necessary internal processes.
*7 Standby power consumption will increase when your TV is

connected to the network.

Note

• Optional accessories availability depends on countries/

region/TV model/stock.

• Design and specifications are subject to change without

notice.

• Subscriptions for services and applications may be required

and additional terms, conditions and/or charges may apply
when using Google Assistant.

Notes on Digital TV function

• Any functions related to Digital TV ( ) will only

work in countries or areas where DVB-T/DVB-T2
(MPEG-2 and H.264/MPEG-4 AVC) digital terrestrial
signals are broadcast. Please confirm with your local
dealer if you can receive a DVB-T/DVB-T2 signal
where you live.

• This TV set complies with DVB-T/DVB-T2

specifications, but compatibility with future DVB-T/
DVB-T2 digital terrestrial broadcasts are not
guaranteed.

• Some Digital TV functions may not be available in

some countries/areas.

Trademark Information

• The terms HDMI, HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing
Administrator, Inc.

• Dolby, Dolby Vision, Dolby Atmos, Dolby Audio, and

the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation. Manufactured
under license from Dolby Laboratories. Confidential
unpublished works. Copyright © 1992-2020 Dolby
Laboratories. All rights reserved.

• Gracenote, the Gracenote logo and logotype,

“Powered by Gracenote” logo are either registered
trademarks or trademarks of Gracenote, Inc. in the
United States and/or other countries.

• Google TV and related logos are trademarks of

Google LLC.

• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS,
Digital Surround, and the DTS logo are registered
trademarks or trademarks of DTS, Inc. in the United
States and other countries. © 2020 DTS, Inc. ALL
RIGHTS RESERVED.

• Netflix is a registered trademark of Netflix, Inc.

• TUXERA is a registered trademark of Tuxera Inc. in
the US and other countries.

• All other trademarks are the property of their
respective owners.

Support

https://www.sony-asia.com/support

© 2021 Sony Corporation Printed in Malaysia