Sony XR-5880R Service Manual

XR-5880R/5890R

SERVICE MANUAL

Photo: XR-5890R

AEP Model

UK Model

Model Name Using Similar Mechanism XR-C6100R
Tape T r ansport Mechanism Type

MG-25G-136

SPECIFICATIONS

MICROFILM

FM/MW/LW CASSETTE CAR STEREO

XR-5880R/5890R

• Wavef orms

1

6-2. SCHEMATIC DIAGRAM — MAIN (1/2) SECTION — • Refer to page 29 for IC Block Diagrams.

5.4Vp-p

32.8KHz

IC501

&£

2

5.6Vp-p

3.68MHz

IC501

(£

3

5.4Vp-p

4.332MHz

IC51

4

Note on Schematic Diagram:

• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.

• All resistors are in Ω and 1/
specified.

¢

•

• C : panel designation.

• U : B+ Line.

• Power v oltage is dc 14.4V and fed with regulated dc power

• Voltage and waveforms are dc with respect to ground

• Voltages are tak en with a V OM (Input impedance 10 MΩ).

• Waveforms are taken with a oscilloscope.

• Circled numbers refer to waveforms.

• Signal path.

• Abbreviation

: internal component.

supply from ACC and BATT cords.
under no-signal conditions.

no mark : FM
< > : TAPE PLAYBACK

Voltage variations may be noted due to normal production
tolerances.

Voltage variations may be noted due to normal production
tolerances.

F : FM
f : AM (MW)
E : T APE PLA YBA CK

G : German model.

: Impossible to measure

∗

4

W or less unless otherwise

(Page 23, 24)

– 21 – – 22 –

6-3. SCHEMATIC DIAGRAM — MAIN (2/2) SECTION — • Refer to page 29 for IC Block Diagrams.

(Page 21, 22)

XR-5880R/5890R

(REMOTE IN)

(Page 27)

Note on Schematic Diagram:

• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.

• All resistors are in Ω and 1/
specified.

¢

•

• C : panel designation.

• U : B+ Line.

• Power v oltage is dc 14.4V and fed with regulated dc power

• Voltage and waveforms are dc with respect to ground

• Voltages are tak en with a V OM (Input impedance 10 MΩ).

• Waveforms are taken with a oscilloscope.

• Circled numbers refer to waveforms.

• Signal path.

• Abbreviation

: internal component.

supply from ACC and BATT cords.
under no-signal conditions.

no mark : FM
< > : TAPE PLAYBACK

Voltage variations may be noted due to normal production
tolerances.

Voltage variations may be noted due to normal production
tolerances.

F : FM
f : AM (MW)
E : TAPE PLA YBA CK

G : German model.

: Impossible to measure

∗

4

W or less unless otherwise

– 23 – – 24 –