Sony XDCA-53 Operating Instructions Manual

4-260-665-11 (1)

HD Camera Adaptor

Operating Instructions

Before operating the unit, please read this manual thoroughly
and retain it for future reference.

XDCA-53

© 2010 Sony Corporation

4260665110

WARNING

To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.

To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.

Important Safety Instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.

• Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.

• Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the
provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.

• Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.

• Only use attachments/accessories
specified by the manufacturer.

• Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.

• Unplug this apparatus during lightning
storms or when unused for long periods
of time.

• Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.

IMPORTANT

The nameplate is located on the bottom.

WARNING

Excessive sound pressure from a headset
can cause hearing loss.
In order to use this product safely, avoid
prolonged listening at excessive sound
pressure levels.

For the customers in the U.S.A.

This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference
in which case the user will be required to
correct the interference at his own expense.

You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.

2

All interface cables used to connect
peripherals must be shielded in order to
comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC
Rules.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies
with Canadian ICES-003.

For the customers in Europe

This product with the CE marking complies
with the EMC Directive issued by the
Commission of the European Community.
Compliance with this directive implies
conformity to the following European
standards:

• EN55103-1: Electromagnetic
Interference (Emission)

• EN55103-2: Electromagnetic
Susceptibility (Immunity)

This product is intended for use in the
following Electromagnetic Environments:
E1 (residential), E2 (commercial and light
industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV
studio).

The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japan.
The Authorized Representative for EMC
and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or
guarantee matters please refer to the
addresses given in separate service or
guarantee documents.

AVERTISSEMENT

Afin de réduire les risques
d’incendie ou d’électrocution,
ne pas exposer cet appareil à
la pluie ou à l’humidité.

Afin d’écarter tout risque
d’électrocution, garder le
coffret fermé. Ne confier
l’entretien de l’appareil qu’à
un personnel qualifié.

IMPORTANT

La plaque signalétique se situe sous
l’appareil.

AVERTISSEMENT

Une pression acoustique excessive en
provenance du casque peut provoquer une
baisse de l’acuité auditive.
Pour utiliser ce produit en toute sécurité,
évitez l’écoute prolongée à des pressions
sonores excessives.

Pour les clients au Canada

Cet appareil numérique de la classe A est
conforme à la norme NMB-003 du Canada.

Pour les clients en Europe

Ce produit portant la marque CE est
conforme à la Directive sur la compatibilité
électromagnétique (EMC) émise par la
Commission de la Communauté
européenne.
La conformité à cette directive implique la
conformité aux normes européennes
suivantes :

• EN55103-1 : Interférences
électromagnétiques (émission)

• EN55103-2 : Sensibilité
électromagnétique (immunité)

Ce produit est prévu pour être utilisé dans
les environnements électromagnétiques
suivants : E1 (résidentiel), E2 (commercial
et industrie légère), E3 (urbain extérieur) et

3

E4 (environnement EMC contrôlé, ex.
studio de télévision).

Le fabricant de ce produit est Sony
Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japon.
Le représentant autorisé pour EMC et la
sécurité des produits est Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Allemagne. Pour toute question
concernant le service ou la garantie,
veuillez consulter les adresses indiquées
dans les documents de service ou de
garantie séparés.

WARNUNG

Um die Gefahr von Bränden
oder elektrischen Schlägen zu
verringern, darf dieses Gerät
nicht Regen oder Feuchtigkeit
ausgesetzt werden.

Um einen elektrischen Schlag
zu vermeiden, darf das
Gehäuse nicht geöffnet
werden. Überlassen Sie
Wartungsarbeiten stets nur
qualifiziertem Fachpersonal.

• EN55103-1: Elektromagnetische
Verträglichkeit (Störaussendung)

• EN55103-2: Elektromagnetische
Verträglichkeit (Störfestigkeit)

Für die folgenden elektromagnetischen
Umgebungen: E1 (Wohnbereich), E2
(kommerzieller und in beschränktem Maße
industrieller Bereich), E3 (Stadtbereich im
Freien) und E4 (kontrollierter EMV­Bereich, z.B. Fernsehstudio).

Der Hersteller dieses Produkts ist Sony
Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japan.
Der autorisierte Repräsentant für EMV und
Produktsicherheit ist Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Deutschland. Bei jeglichen
Angelegenheiten in Bezug auf
Kundendienst oder Garantie wenden Sie
sich bitte an die in den separaten
Kundendienst- oder Garantiedokumenten
aufgeführten Anschriften.

WICHTIG

Das Namensschild befindet sich auf der
Unterseite des Gerätes.

WARNUNG

Zu hoher Schalldruck von Headset kann
Gehörschäden verursachen.
Um dieses Produkt sicher zu verwenden,
vermeiden Sie längeres Hören bei sehr
hohen Schalldruckpegeln.

Für Kunden in Europa

Dieses Produkt besitzt die CE­Kennzeichnung und erfüllt die EMV­Richtlinie der EG-Kommission.
Angewandte Normen:

4

Table of Contents

Overview ..................................................................................6

Features ...................................................................................6

Using the CD-ROM ................................................................7

Reading the CD-ROM Manuals ..........................................7

Names and Functions of Parts............................................... 8

System Configuration........................................................... 12

Mounting on the Camcorder Support ................................12

Important Notes on Operation ............................................16

Specifications .........................................................................17

General ..............................................................................17

Connectors ........................................................................17

Supplied Accessories ........................................................17

Accessories Not Supplied .................................................18

Table of Contents

5

Overview

Features

The XDCA-53 HD Camera Adaptor
(referred to as “the adaptor” hereafter)
allows you to connect an XDCU-50 HD
Camera Extension Unit to supply power to
the camcorder and extend the distance over
which camcorder input and output signals
can be transmitted (maximum distance
100 m (328 feet)).

Can be installed on the following
camcorder

PMW-EX3

For details, refer to the XDCU-50 Operating
Instructions for information about how to set up a
system consisting of this adaptor, a camcorder, and
the XDCU-50, and for precautions about use of the
system.

HD digital transmission

This adaptor supports bidirectional
transmission of uncompressed HD digital
signals between this adaptor and XDCU-

50.

The maximum transmission distance is
100 m (328 feet).
You can transmit high-quality video signals
regardless of cable length.

Monitor output connector

Either main line video signals from the
camcorder or return video signals from the
XDCU-50 can be output as HDSDI signals.

Return video selection button

You can switch the monitor output to return
video while the adaptor’s RET button is
held down.

Communication interfaces

• Intercom (1 line)

• Tally (red and green)

• Trunk line (1 line)

Overview / Features

6