Sony XCL-5005, XCL-5005CR Hardware Manual

XCL-5005

5-Megapixel

Sony CCD

5-Megapixel

Sony CCD

15 fps

15 fps

PoCL

PoCL

B/W Digital Camera

XCL-5005CR

Color Digital Camera

FeaturesOutline

Sony is expanding its Camera LinkTMfamily
with the introduction of the XCL-5005 (B/W)
and XCL-5005CR (Color) Digital Cameras for
demanding industrial-inspection applications.
Both the XCL-5005 and XCL-5005CR cameras
incorporate a 2/3-type progressive scan
IT CCD that produces ultra-high resolution
images of over 5,000,000 effective pixels at
15 fps. In addition,these cameras employ the
standard Camera Link interface, which is
switchable to PoCL (Power over Camera Link)
enabling users to simplify connections to
various machine-vision systems. These cameras
are compatible with standard C-mount lenses
adding to their cost-effectiveness.

The XCL-5005 and XCL-5005CR feature a
multitude of functions useful in machine-vision
applications, such as vertical and horizontal
partial scanning, built-in real-time hardware
pre-processing, and flexible high-speed
outputs. These robust cameras are highly
resistant to shock and vibration which is
essential for machine-vision applications.

These feature-rich, ultra-high resolution digital
cameras capture clear,fast moving objects
or still images in low light environments.They
are an ideal solution for today’s wide range
of industrial machine vision applications
such as semiconductors, electronic display
and large part inspection, and bio-science/
microscopy applications.

Ultra-High Resolution Image Capture

The XCL-5005 and XCL-5005CR cameras
incorporate a 2/3-type progressive scan IT
CCD that provides outstanding picture
quality and high-resolution images of over five
effective megapixels (2448 x 2050) at 15 fps.

Supports both PoCL and
Standard Camera Link
(Base Configuration)

These cameras are equipped with the
industry standard digital Camera Link
interface to simplify connectivity to machine
vision systems. This interface outputs
high-speed image data at up to 2.4 Gb/s
enabling high-resolution images to be
transferred and processed quickly and
accurately. What’s more, because these
cameras are PoCL-capable, they can be
configured using a single cable for easy and
flexible installation.

Vertical and Horizontal Partial Scanning

The XCL-5005 and XCL-5005CR cameras
feature both a vertical and horizontal partial
scanning function used to scan particular
areas of an image to reduce data size and
to minimize processing time. The horizontal
scanning function can be set from 128 pixels
to 2448 pixels in 4-pixel increments allowing
users to precisely select the area of the
image to be scanned.

Hardware Pre-processing

These cameras feature a number of real-time
hardware pre-processing functions such as
a 3 x 3 filter, DTL filter,γ – correction, and a
binarization mechanism that can be used
to emphasize the edges of an object or to
change the contrast of an image.These
functions provide frame grabbers with
images that are easy to process, thus
minimizing the load on the PC.

Variety of Output Formats

Camera Link (Base Configuration)

Resolution Depth Output Data Clock

XCL-5005 8-, 10-, 12-bit B/W 80 MHz (1 tap)

XCL-5005CR 8-, 10-, 12-bit Raw Color 80 MHz (1 tap)

24-bit RGB
8-, 10-, 12-bit Raw Color 40 MHz (2 taps)

40 MHz (2 taps)

High Shock and Vibration Resistance

Vibration resistance : 10 G (20 to 200 Hz)
Shock resistance : 70 G

Other Features

• C-mount Lens Interface

• Compact and Lightweight

1 3/4 (W) x 1 3/4 (H) x 2 3/8 (D) inches
(44 x 44 x 57.5 mm)
(excluding protrusions)

Approx. 4.6 oz (130 g)

• External Trigger Shutter

2 to 1/10,000 s

• Binning Function (XCL-5005 only)

• Built-in Test Pattern

Specifications PIN Assignment &

Image device 2/3-type progressive scan IT CCD

XCL-5005 XCL-5005CR

Standard picture size (H x V) 2448 x 2050 (5,018,400 pixels) 2448 x 2050 (5,018,400 pixels)*
Cell size 3.45 x 3.45 µm
Resolution depth 8/10/12 bits/pixel Raw Color: 8/10/12 bits/pixel

RGB Color: 24bits
Lens mount C mount
Digital interface Standard Camera Link (Base Configuration)/PoCL (Power over Camera Link)
Frame rate 15 fps
Output data clock 80 MHz (1 Tap) 80 MHz (1 Tap)

40 MHz (2 Taps) 40 MHz (2 Taps, Raw Color only)
Sensitivity 400 lx F5.6 (0dB) 2000 lx F5.6 (0dB)
Minimum illumination 1 lx (GAIN +18dB, F1.4) 8 lx (GAIN +18dB, F1.4)
Gain control 0 to +18 dB
Readout modes Normal, Binning (1x2), Normal, Partial scan (by 2 line increments)

Partial scan (by 1 line increments)
Shutter speed 2 to 1/10,000 s
Shutter mode External trigger shuter (Trigger start/Trigger start and exposure duration)
Readout features Gamma : OFF/ON (Arbitrary setting), Gamma : OFF/ON (Arbitrary setting)

DTL filter (Edge detection/emphasis), AWB : OFF/ON (One push)

3x3 matrix filter, Binarization
Extended signal output DVAL/EXPOSURE/GND output (selectable)
Power requirements DC 12V
Power consumption Max. 3.8 W
Dimensions 1 3/4 (W) x 1 3/4 (H) x 2 3/8 (D) inches ( 44 x 44 x 57.5 mm), (excluding protrusions)
Weight Approx. 4.6 oz (130 g)
Operating temperature 23 to 113 °F (-5 to 45 °C)
Storage temperature -22 to 140 °F (-30 to 60 °C)
Operating humidity 20 to 80 % (no condensation)
Storage humidity 20 to 95 % (no condensation)
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
Supplied accessories Lens mount cap, Operating instructions

* When RAW data is output,depending on the frame grabber, picture size may be reduced to 2,446 (H) x 2,048 (V).

Dimensions

/16 (26)

1

1

17

4-M3

(13)

/32

2 (50)

13

(10)

Connector

■ 12-pin EIAJ connector

Pin No. Pin No.

1 DC IN (Ground) 7 GPIO IN 1+ (Isolated)
2 DC IN 8 GPIO OUT 2- (Isolated)
3 ISO GND 9 GPIO OUT 2+ (Isolated)
4 Store OUT (Isolated) 10 GPIO OUT 2+ (Isolated)
5 GPIO OUT 1- (Isolated) 11 Trigger IN
6 GPIO OUT 1+ (Isolated) 12 ISO GND

■ 26-pin connector

Pin No. Pin No.

1

POWER/INNER_SHIELD (GND)
2 X0- output (signal) 15 X0+ output (signal)
3 X1- output (signal) 16 X1+ output (signal)
4 X2- output (signal) 17 X2+ output (signal)
5 XCLK- output (signal) 18 XCLK+ output (signal)
6 X3- output (signal) 19 X3+ output (signal)
7 SerTC+ (signal) 20 SerTC- (signal)
8 SerTFG- (signal) 21 SerTFG+ (signal)
9 TRIG- input (signal) 22 TRIG+ input (signal)

10 NC 23 NC
11 NC 24 NC
12 NC 25 NC
13 INNER_SHIELD (GND) 26

PoCL: Pin 1 and pin 26 are used for power.

Standard Camera Link: Pin 1 and pin 26 are used for INNER_SHIELD (GND).

14 INNER_SHIELD (GND)

Optional Accessories

Tripod Adaptor

VCT-ST70I

Isolated type

Weight: Approx.0.5 oz (14 g)

Dimensions (W x H x D):

5

/8 x 1/4 x 23/8 inches

1

(40 x 6 x 59 mm)

/32

1

(12)

/2

Camara Adaptor

DC-700

POWER/INNER_SHIELD (GND)

/4 (44)

3

1

1 3/4 (44)

11

4-M3

/16 (ø 28.7)

3

1

/32 (8)

/16 (26)

1

1

17

(13)

/32

Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/videocameras

IS-1206 (MK10466V1)

2 3/8 (57.5)

2 (50)

Cables

CCXC-12P02N

CCXC-12P05N

CCXC-12P10N

CCXC-12P25N

12-Pin Connector

26-Pin Camera Link Connector

Unit: inches (mm)

©2008 Sony Corporation. All rights reserved.

Reproduction in whole or in part without written permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measurements are approximate.

Sony is a registered trademark of Sony Corporation.

All other trademarks are the property of their respective owners.

Printed in U.S.A. 2/08