Sony XBR-65X900A, XBR-55X900A User Manual

Download

Page 1

LCD TV

Operating Instructions

(Setup Guide)

4-457-217-E2(1)

XBR-65X900A / 55X900A

Lea este manual antes de usar el producto

Centro de Asistencia de Sony

http://esupport.sony.com/ES/LA/

Llame al número telefónico que aparece en su póliza de garantía.

Por favor no devuelva el producto a la tienda donde adquirió el producto.

Page 2

Owner’s Record

The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

Model Name

Serial No.

IMPORTANT NOTICE TO COFETEL

This equipment operation is subject to the following two conditions: (1) It is possible that this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.

For information related to COFETEL certificate number, refer to the package label and/or product.

CAUTION

To prevent electric shock and blade exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.

• Operate the TV only on 110-240 V AC

• Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http://www.sony.com/tvsupport) for the latest information. The vision of young children (especially those

under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images or play stereoscopic 3D games. Adults should supervise young children to ensure they follow the recommendations listed above.

• Do not use, store, or leave the 3D Glasses or battery near a fire, or in places with a high temperature, e.g., in direct sunlight, or in sunheated cars.

• When using the simulated 3D function, please note that the displayed image is modified from the original due to the conversion done by this television.

Licensing Information

The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Fergason Patent Properties, LLC: U.S. Patent No. 5,717,422 U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories.

“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray Disc Association.

“BRAVIA” and , S-Force, Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Corporation.

DLNA

, the DLNA Logo and DLNA CERTIFIED marks, or certification marks of the Digital Living Network Alliance.

TrackID is a trademark or registered trademark of Sony Mobile Communications AB.

Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Software, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the

are trademarks, service

Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, MusicID, VideoID, Video Explore, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

Opera

Wi-Fi, Wi-Fi Direct and Miracast are marks or registered marks of the Wi-Fi Alliance.

“Sony Entertainment Network logo” and “Sony Entertainment Network” are trademarks of Sony Corporation.

MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC.

Manufactured under license from DTS Licensing Limited. For U.S. and worldwide patent and trademark information, see www.dts.com/patents/legacy.aspx. (c) DTS Licensing Limited and DTS, Inc. 2012.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

Color IQ and the Color IQ logo are trademarks of QD Vision, Inc.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

Page 3

The 55 class has a 54.6 inch (138.8 cm) viewable image size and the 65 class has a 64.5 inch (163.9 cm) viewable image size (measured diagonally).

• The illustrations of the remote control used in this manual are of the RM-YD087 unless otherwise stated.

• The illustrations used in this manual may differ depending on your TV model.

• Retain this manual for future reference.

Page 4

The BRAVIA® 4K TV Experience

Thank you for choosing Sony! Your new BRAVIA Experience”. This document will help you get the most out of your TV. Please take a moment to register your TV at:

http://esupport.sony.com/LA/perl/ registration.pl

Four Steps to a 4K TV Experience

Set, Source, Sound, and Setup.

TV opens the door to the “4K TV

1 Set

Now that you have made the best selection in LED backlit LCD TV technology, be sure to remove all accessory contents from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV, you need access to High-Definition programming.

• Upgrade your signal or content source to high-definition (4K) by contacting your HD service provider.

This TV displays all video input signals in a resolution of 3,840 dots × 2,160 lines.

• Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV. Visit http://www.antennaweb.org for more information on antenna selection and setup.

• Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD equipment.

3 Sound

Complete the high-definition experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 11 for sample connection diagrams. To help assure the highest quality for your 4K experience, use Sony HDMI (High-Definition Multimedia Interface) cables.

The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs.

INPUT VIDEO AUDIO

1080/24p/30p

SUPPORTED FORMATS

1080p*11080i

720/24p/30p

720p*1480p 480i PC*

HDMI

COMPONENT

Audio L/R

VIDEO

*1For details of supported formats, refer to the “Specifications” in this manual. *2For supported PC formats refer to the i-Manual.

Composite video

connection

Audio L/R

Page 5

Page 6

About this manual (Operating Instructions)

This manual explains how to setup your TV. For more information on how to use BRAVIA TV, refer to the “Electronic manual”.

Operating Instructions

Electronic manual

(i-Manual)

Explains how to setup your TV such as connections, initial setup, and basic operations.

For more information, press the i-MANUAL button

Explains how to use all the features. See page 29 on how to use the i-Manual.

Images and illustrations used in this manual may differ from the actual screen.

Page 7

Table of Contents

Getting Started

Checking the accessories........................................................................8

Inserting batteries into the remote control................................................8

Before setting up your TV.........................................................................9

1: Attaching the Table-Top Stand ..........................................................10

2: Connecting the TV..............................................................................11

3: Securing the TV..................................................................................17

4: Bundling the cables ...........................................................................19

5: Connecting the TV to the Internet.......................................................20

6: Running initial setup...........................................................................21

Using a Wall-Mount Bracket...................................................................22

Installing the TV against a wall or enclosed area...................................23

Using Your BRAVIA TV

Watching TV B............................. wf

Selecting various functions and settings (Home Menu).........................26

Watching Internet Video.........................................................................28

Looking for Instructions

Looking for instructions in the electronic manual (i-Manual)

Additional Information

Troubleshooting......................................................................................32

How to care for your BRAVIA TV ............................................................33

Specifications.........................................................................................34

Additional Information ............................................................................36

... wl

Page 8

Getting Started

Checking the accessories

Remote control (1)*

One-touch Remote Control (1)*

Size AAA batteries (4)

Under cover (1)

Cable clamper (1)

Table-Top Stand (1)*

Fixing screws for Table-Top Stand

(M5 × 12) (4)

Passive 3D Glasses (4)

Operating Instructions (this manual) and

Inserting batteries into the remote control

1 Remove the protection sheet. 2 Push and slide the cover to open.

Page 9

• One-touch Remote Control can only be used after registration with the TV. For more information on how to register, press i-MANUAL, then select “Table of Contents” t “Configuring Various Settings” t “General Settings” t “Setting One-touch Remote Control”.

x Guidelines for Remote Control

• Point your remote control directly at the

IR sensor located on your TV.

• Make sure that no objects are blocking

the path between the remote control and the IR sensor on your TV.

Before setting up your TV

Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. See page 22 (Using a Wall-Mount Bracket) if you want to mount the TV to a wall. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the supplied screws to complete the task. Look for the supplied Table-Top Stand instruction leaflet. Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

Getting Started

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

• Ensure your TV has adequate ventilation, see page 23.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

(Continued)

Page 10

• Ensure that there are no objects in front

IR Sensor

of the TV.

1: Attaching the

Table-Top Stand

Refer to the supplied Table-Top Stand leaflet for proper attachment.

• Do not put stress on the LCD panel or the frame around the screen.

• Be careful to not pinch your hands or the AC power cord when you install the TV set to the Table-Top Stand.

1 Place the TV set on the Table-Top Stand.

Arrow direction shows front of the Table-Top Stand.

2 Fix the TV to the Table-Top Stand using

the supplied screws. The arrow marks

indicate the location of the screw holes used for securing the Table-Top Stand.

Page 11

Set Top Box

• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.

3 Attach the under cover.

2: Connecting the TV

• Use an antenna cable connector no greater than 14 mm thick.

• Use an HDMI cable connector within 12 mm (thickness) × 21 mm (width).

• Use Sony HDMI cable with “High Speed” indication for HDMI connection.

• For more information on connections, refer to the i-Manual.

x Shown with a Set Top Box with

HDMI connection

Getting Started

Detaching the Table-Top Stand from the TV

To detach the Table-Top Stand from the TV, remove the screws fixed in step 2.

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.

• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD panel facing down.

• When installing the TV on a wall, remove the screws from the rear of the TV. Be sure to store the removed screws in a safe place, keeping them away from children.

• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.

(Continued)

Page 12

Recommendation of the F type plug

(Reference drawing of the F type plug)

1.5 mm max.

7 mm max.

Set Top Box

Projection of the inner wire from the connection part must be less than 1.5 mm.

x Shown with a Set Top Box with

COMPONENT connection

Page 13

x Cable System or VHF/UHF Antenna

Cable or Antenna

Use authorized MHL 2 CABLE with MHL logo MHL device

System

x Shown with MHL device with MHL

connection

• If Auto Input Change (MHL) is set to On, the TV automatically switches to HDMI IN 2/MHL from other input when MHL-compatible device is connected to HDMI IN 2/MHL jack. The availability of Auto Input Change (MHL) depends on whether the MHL-compatible device can support this feature.

• You can continue normal usage of the connected MHL-compatible device (such as receiving calls) depending on its capability.

• Some remote control functions may not be available depending on features of the connected MHL-compatible device. Please refer to the device manual for details.

• If Charge MHL during Power Off is set to On, you can continue charging the MHL-

compatible device even when the TV is in standby mode.

• This product is officially MHL-certified for operation with other MHL-certified devices. If you encounter any problems when using the MHL function, please consult the device manufacturer for support.

Getting Started

The MHL (Mobile High-Definition Link) enables the TV to communicate with a connected MHL-compatible device. The TV can charge the connected MHL-compatible device while playing photo/music/video from it. You can use the TV remote control to control the connected MHL-compatible device.

(Continued)

Page 14

x Shown with BRAVIA® Sync™ Basic Connection

*1Rear of TV

Blu-ray Disc

HD Cable Box or HD Satellite Receiver

A/V Receiver

SAT (Dish) Cable/Antenna

*1Signifies a BRAVIA Sync capable device. *2The optical connection is only needed for A/V receivers that do not support ARC (Audio Return Channel).

*2Optical Connection

Rear of TV

Page 15

x Shown with Basic Connection with Home Theater System

VIDEO

Rear of TV

Cable/ Antenna

Blu-ray Disc/DVD

SD Cable Box or SD Satellite Receiver

Cable/SAT (Dish)

Home Theater System

*Optical

Connection

* The optical connection is only needed for home theater system that do not support ARC (Audio Return

Channel) when connecting with HDMI.

Rear of TV

Getting Started

(Continued)

Page 16

x Shown with PC Connection with SD VCR/DVD

Rear of TV

DVDVCR

Splitter

Cable/Antenna

VCR/DVD Combo

Rear of TV

* DVI does not support audio signals. Connect the audio output of the PC to the PC speakers or an A/V receiver

to listen to sound from the PC.

*DVI

Notebook PC

Side Panel

Page 17

3: Securing the TV

Stand

Angle brace (not supplied)

Recommended Measures to Secure the TV

Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Preventing the TV from Toppling

• Secure the TV to a wall and/or stand.

• Do not allow children to play or climb on furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on: – slippery, unstable and/or uneven

surfaces.

– furniture that can easily be used as

steps, such as a chest of drawers.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Route all AC power cords and connecting cables so that they are not accessible to curious children.

Consider the following measures when securing your TV to a Stand (not supplied).

1 Secure the Stand for the TV.

Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.

• Attach the other side to the Stand.

2 Secure the TV to the Stand.

Use the optional hardware listed as follows (not supplied):

• M4 machine screw (screwed into the TV’s Table-Top Stand)

• A screw or similar (attach it to the Stand)

• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

Getting Started

(Continued)

Page 18

An alternative way to secure the TV is

Rope or chain (not supplied)

M4 machine screw (not supplied)

Screw (not supplied)

Screw M4 Rope or

chain TV’s

Table-Top Stand

6-7 mm

Anchor bolts (M6) (not supplied)

Wallmount holes

Rope or chain (not supplied)

Wall-anchor (not supplied)

with an optional Sony Support Belt Kit. The Sony Support Belt Kit is available as an optional accessory, depending on your TV model.

The length of the M4 machine screw differs depending on the rope or chain diameter. Please see below illustration.

Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name.

• For Mexico call: 01-800-759-7669

3 Anchor the TV to the Wall.

Anchor the TV to the wall by using bolts, wall anchor and chain (or rope).

• Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.

• Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

Page 19

4: Bundling the

cables

* When installing on the wall, attach the cable holder

under the terminals.

Before bundling the cables, remove the cable holder from the AC cover. Reuse the cable holder to bundle the other cables.

• Do not bundle the AC power cord together with other cables.

Getting Started

Page 20

5: Connecting the TV

Internet

Modem with router functions

Router

Modem

Internet

Wireless router

Modem

Internet

to the Internet

When you connect this TV to the Internet, you can enjoy multiple functions. For details on the functions, refer to the i-Manual.

• You will need to contract with an Internet service provider to connect to the Internet.

Preparing a wired network

Preparing a wireless LAN

The built-in wireless LAN device allows you to access the Internet and your home network. With this feature, you can connect to a wireless LAN and enjoy the benefits of networking in a cable-free environment. Before setting up the wireless LAN function of the TV, be sure to set up a wireless LAN router.

• For LAN connections, use a Category 7 cable (not supplied).

Page 21

6: Running initial

setup

3 Press V/v/B/b to select an item, then

press . Follow the instructions on the screen.

Getting Started

• Home mode sets the TV to settings optimized for home viewing.

1 Complete your cable connections before

proceeding with the Initial Setup. Connect the TV to your nearest power outlet.

2 Press "/1 on the TV. The illumination

LED will light up in white. When you switch on the TV for the first

time, the Language menu appears on the screen.

• When you turn on the TV for the first time, the TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the illumination LED on the front of the TV blinks white for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory for some TVs.

• The illumination LED lights up in different colors according to the status of the TV. If you do not wish to light up the illumination LED, you can turn it off later. Press HOME, then select Settings t

Preferences t Front Panel Illumination t Illumination LED t Off. You can also press OPTIONS, then select Illumination LED t Off.

4 Scan for available channels. If you

receive channels from a cable box or satellite receiver and do not wish to use the TV’s built-in tuner, select Skip.

5 Set up the Internet settings. If you do not

access the Internet, or to set up later, select Skip. After you select Continue or Start (depending on model) at the Internet setup confirmation screen, select Auto to connect to the network automatically. Select Custom to connect manually.

• If you use WEP security, select Custom t Wireless Setup t Scan. Then,

select the network name (SSID) you want to connect. If you cannot find the required network name, select [Manual Entry] and press to enter network name.

• To set Network Setup later, press HOME, then select Settings t Network t Network Setup.

• Use the optional USB Wireless LAN Adapter to connect with your wireless router (or access point) at 5GHz. Insert USB Wireless LAN Adapter and set Wi-Fi

Direct to Off. Press HOME, then select Settings t Network t Wi-Fi Direct t Off.

Page 22

Using a Wall-Mount

8-12 mm

Screw

Mounting Hook Hook attachment on rear of

TV set

Bracket

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see page 11 (Detaching the Table-Top Stand from the TV). Prepare the TV for the Wall-Mount Bracket before making cable connections.

For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket designed for your TV and the installation should be performed by a Sony dealer or licensed contractor.

• See page 36 (Compatible Wall-Mount Bracket Information) (XBR-55X900A only).

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.

• Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting hooks to the TV set. The supplied screws are designed as indicated by illustration when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children.

• Read the supplied Safety Booklet for

additional safety information.

Page 23

Installing the TV

Leave at least this much space around the set.

Installed with stand

10 cm

30 cm

10 cm

6 cm

Installed on the wall

Leave at least this much space around the set.

10 cm

30 cm

Never install the TV set as follows:

Air circulation is blocked. Air circulation is blocked.

Wall Wall

against a wall or enclosed area

Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown in the illustration.

Getting Started

• Inadequate ventilation can lead to overheating of the TV and may cause damage to your TV or cause a fire.

Page 24

Using Your BRAVIA TV

or or

Rear of TV

Watching TV

1 Turn on the TV.

Press "/1 on the TV or POWER on the remote control to turn on the TV.

2 Select a TV channel or select an

input.

x To select digital channels

Use 0-9 and . For example, to enter channel

2.1: Press , and , then press .

• See below illustration for location of the CH+/-, , V/v/B/b, , and HOME buttons on the

+/-

TV.

Page 25

1 PIC OFF

Turns picture off, and sound remains on.

2 Color buttons

When the color buttons are available, an operation guide appears on the screen.

3 JUMP

You can jump back and forth between two channels or inputs. The TV alternates between the current channel or input and the last channel or input that was selected.

4 DISPLAY

Displays channel number, details of programs, and the clock.

5 SUBTITLE/CC

You can turn closed captions/subtitles on/off.

Watching 3D contents

This feature lets you experience powerful 3D entertainment, such as stereoscopic 3D games and 3D Blu-ray Disc. Refer to the i-Manual on how to set the 3D settings or watch the 3D contents.

Frequently used buttons

Using Your BRAVIA TV

Page 26

Selecting various functions and

2, 3

OPTIONS

settings (Home Menu)

You can select the features of your TV from the Home menu.

Here is an example on how to select an item and modify the TV settings.

1 Press HOME.

2 Press V/v to select Settings

category.

The contents of Settings are displayed horizontally.

See page 27 (Category list) for all categories.

3 Press B/b to select a desired

setting item, then press .

4 Modify the settings.

x To exit the Home menu

Press HOME.

x To select using the OPTIONS button

Press OPTIONS. A list of convenient functions and menu shortcuts are displayed. The menu items vary based on the current input and/or content.

Page 27

Category list

Watching Internet Video

2, 3, 4

This feature serves as a gateway to Internet content, delivering a variety of on-demand entertainment straight to your TV. You can enjoy video content, including movies and cartoons. You will need to make a broadband Internet connection. For details, see page 20 (5: Connecting the TV to the Internet).

1 Press HOME.

2 Press V/v to select Applications

category.

3 Press B/b to select All

Applications, then press .

4 Press V/v/B/b to select the

desired service, then press .

• If you experience difficulties with this feature, check that the Internet connection is set up properly.

• The interface to Internet content depends on the Internet content providers.

• Services block video content based on the Parental Lock setting of the TV. Some service

providers do not support this function.

• To update Internet Video content services, press HOME, then select Settings t Network t Refresh Internet Content.

Page 29

Looking for Instructions

RETURN

Arrow mark*

Looking for instructions in the electronic manual (i-Manual)

Operating instructions are built into your BRAVIA TV and can be displayed on the screen. To learn more about your TV features, access your i-Manual with the touch of a button.

1 Press i-MANUAL.

2 Select an item.

1 Press B/b to select an item.

2 Press V/v/B/b to select an item, then press

* If an arrow mark appears, press v repeatedly to

display more items.

(Continued)

Looking for Instructions

Page 30

The page of the selected item appears.

• If your TV is connected to the Internet, you can check for latest FAQ (Frequently Asked Questions). Refer to “Troubleshooting” in the i-Manual, select “Frequently Asked Questions” and then follow the instructions on the screen. (Available in English and for United States only)

• You can step through pages using B/b. Press RETURN to return to the previous page.

Saving frequently viewed pages (Bookmark)

You can save frequently viewed pages for easy access anytime.

x To access the bookmarked page

When displaying the i-Manual, press the blue button on the remote control to display the bookmark list. Press V/v to select the desired item, then press .

• To return to the previous screen, press

RETURN.

x To remove a bookmark

When the bookmarked page is displayed, press the red button on the remote control.

x To save a page

In the page to bookmark, press the red button on the remote control.

Page 31

Displaying the page again

i-Manual screen previously displayed

BRAVIA TV screen

while operating the TV

You can switch between the i-Manual screen and the TV screen. This feature allows you to refer to the instructions in the i-Manual while using your BRAVIA TV. Press i-MANUAL to switch between the i-Manual screen previously displayed and the TV screen.

• To jump to the top page of i-Manual, press the yellow button on the remote control. You can also press HOME, then select Settings t i-Manual to jump to the top page of i-Manual.

• Once you turn off the TV or the TV goes to standby mode, the i-Manual will be displayed from the top page when you select

i-Manual.

Looking for Instructions

Page 32

Additional Information

Troubleshooting

When the illumination LED is flashing in red, count how many times it flashes (interval time is three seconds).

Press "/1 on the TV to turn it off, disconnect the AC power cord, and contact Sony Customer Support (information provided on the front cover) with how many times the indicator flashes.

When the illumination LED is not flashing, check the items in the table below.

Also refer to “Troubleshooting” in the i-Manual. If the problem persists, contact Sony Customer Support (information provided on the front cover).

Condition Explanation/Solution

There is no picture (screen is dark) and no sound.

Some programs cannot be tuned.

The remote control does not function.

The Parental Lock password has been forgotten.

The TV and its surrounding become warm.

How to reset the TV to factory settings

Frozen audio or video, a blank screen, or the TV does not respond to TV or remote control buttons.

• Check the antenna/cable connection.

• Connect the TV to the AC power, and press "/1 on the

TV or POWER on the remote control.

• Check the antenna.

• Replace the batteries.

• Your TV may be in SYNC mode.

Press SYNC MENU, select TV Control and then select Home (Menu) or Options to control the TV.

• Enter 4357 for the PIN code. (PIN code 4357 is always accepted.)

• When the TV is used for an extended period of time, the TV and its surroundings may become warm to touch. This is not a malfunction of the TV.

• Turn on the TV. While holding down V on the remote control, press "/1 on the TV. (The TV will turn itself off, then back on again.) Release V. WARNING: The reset will clear all of your customized settings including the Parental Lock setting.

• Perform a simple reset of the TV by unplugging the AC power cord for two minutes, then plug it in again.

When viewing photo files in 4K resolution:

• The menu screen, operation guide or messages may not appear when displaying photos.

• To finish playback of photos, press RETURN, or switch the input by pressing .

Page 33

How to care for your BRAVIA TV

Safety is very important. Please read and follow the safety documentation (Safety Booklet) separately provided.

Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Do not handle the speakers with excessive force during cleaning or maintenance to prevent any damages.

• Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction provided on the package.

• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

The TV should also be placed on a stable surface to prevent it from toppling over (see page 17). If you have young children or pets at home, check regularly to ensure the TV is securely fastened.

Information

Additional

Page 34

Specifications

System

Television system NTSC: American TV standard

Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

Panel system LCD (Liquid Crystal Display) Panel Speaker output 12.5 W + 12.5 W + 20 W + 20 W

Input/Output jacks

CABLE/ANTENNA 75-ohm external terminal for RF inputs

VIDEO IN 1 Video / Audio input (phono jacks) COMPONENT IN

VIDEO IN 2

HDMI IN 1/2/3/4 (Support 4K resolution)

MHL (common with HDMI IN 2)

AUDIO OUT/Headphones Stereo mini jack DIGITAL AUDIO OUT

(OPTICAL)

LAN 10BASE-T/100BASE-TX connector (Connection speed may differ depending on the

USB/DLNA Refer to the i-Manual for supported formats.

ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

BPR (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i

YP Audio input (phono jacks) Video input (common phono pin with Y input)

Video (2D): 4096 × 2160p (24 Hz), 3840 × 2160p (24, 25, 30 Hz), 1080p (30, 60 Hz),

Video (3D): Frame Packing 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p Side-by-Side 1080p (60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) Over-Under 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital ARC (Audio Return Channel) (HDMI IN 1 only)

Video (2D): 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p,

Video (3D): Side-by-Side 1080/24p, 1080i (60 Hz), 720p (60 Hz) Over-Under 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

Digital optical jack (Two channel linear PCM, Dolby Digital)

network environment. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)

1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p, 480i, PC Formats

480i

Page 35

Others

Supplied accessories See page 8 (Checking the accessories).

Remote control

Model

Power requirement 3 V DC (2 batteries type AAA) Passive 3D Glasses TDG-500P

Optional accessories Connecting cables

Operating temperature 0 ºC – 40 ºC

RM-YD087 RMF-YD001

Support Belt Kit Wall-Mount Bracket: SU-WL400 (XBR-55X900A only) Camera and Microphone Unit: CMU-BR200/CMU-BR100 USB Wireless LAN Adapter: UWA-BR100 Passive 3D Glasses: TDG-500P

SimulView™ Passive Glasses: TDG-SV5P

Model name XBR- 65X900A 55X900A

Power and others

Power requirement 110-240 V AC, 50/60 Hz

Power consumption

Screen size (inches measured diagonally)

Display resolution 3,840 dots (horizontal) × 2,160 lines (vertical)

Dimensions*with stand (mm) 1,682 × 903 × 405 1,463 × 778 × 405

Mass

in use 338 W 268 W

in standby Less than 0.20 W with 120 V AC and less than 0.40 W with 240 V AC

(cm)

without stand

wall-mount hole pattern (mm) 400 × 300 300 × 300

wall-mount screw size (mm) M6 (length: see diagram on page 22.)

with stand (kg) 46.4 34.5

without stand (kg) 45.0 33.1

163.9

64.5 inches (65 class)

(mm) 1,682 × 875 × 100 1,463 × 749 × 100

138.8

54.6 inches (55 class)

* Screen size, dimensions and mass are approximate values.

• Optional accessories availability depends on countries/region/TV model/stock.

Design and specifications are subject to change without notice.

Information

Additional

Page 36

Additional Information

Note

This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider. Availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

Compatible Wall-Mount Bracket Information (XBR-55X900A only)

Use the following Sony Wall-Mount Bracket with your TV model.

Sony TV Model No.

XBR-55X900A

Sony WallMount Bracket Model No.

Use with other Wall-Mount Brackets* may cause instability and could result in property damage or injury.

* For instructions on using the Wall-Mount Bracket

with your TV please go to http://esupport.sony.com/LA/ and download “Additional Information for Using Sony Wall-Mount Bracket”.

SU-WL400

for your TV model

To Customers

Sufficient expertise is required for TV installations. Be sure to subcontract the installation to a Sony dealer or licensed contractor and pay adequate attention to safety during the installation.

Page 37