Sony XBR55X810C, XBR65X810C User Manual

Television

Reference Guide

Téléviseur

Manuel de référence

Sony Customer Support

U.S.A.: http://www.sony.com/tvsupport Canada: http://www.sony.ca/support

United States Canada

1.800.222.SONY 1.877.899.SONY

Please Do Not Return the Product to the Store

XBR-65X810C / 55X810C

Service à la clientèle Sony

Canada : http://support.sony.ca/fr États-Unis : http://www.sony.com/tvsupport

Canada États-Unis

1.877.899.SONY 1.800.222.SONY

Ne retournez pas le produit au magasin

Table of Contents

IMPORTANT NOTICE . . . . . . . . . . . . . . . . 2

Safety information . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . 5

Parts and Controls . . . . . . . . . . . . . . . .7

Controls and Indicators . . . . . . . . . . . . . 7

Inputs and Outputs . . . . . . . . . . . . . . . . 8

Using Remote Control . . . . . . . . . . . .10

Remote Control Parts Description. . . . 10

Connecting the TV . . . . . . . . . . . . . . .12

Showing a Set Top Box with

COMPONENT connection. . . . . . . . . . . 12

Connecting MHL Device. . . . . . . . . . . . 13

Showing HD BRAVIA® Sync™ Basic

Connection . . . . . . . . . . . . . . . . . . . . . . 14

Showing HD Basic Connection with

Home Theater System . . . . . . . . . . . . . 15

Showing PC Connection with SD

VCR/DVD . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing the TV to the Wall . . . . . . . 17

Detaching the Table-Top Stand from

the TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installing the TV against a wall or

enclosed area. . . . . . . . . . . . . . . . . . .18

Troubleshooting. . . . . . . . . . . . . . . . .19

Troubles and Solutions . . . . . . . . . . . . 19

Specifications . . . . . . . . . . . . . . . . . . 20

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

Note

• Images and illustrations used in Startup Guide and this manual are for reference only and may differ from actual product appearance.

The 65 class has a 64.5 inch (163.9 cm) viewable image size and 55 class has a 54.6 inch (138.8 cm) viewable image size (measured diagonally).

Location of the identification label

Labels for the Model No. and Power Supply rating are located on the rear of the TV.

IMPORTANT NOTICE

Owner’s Record

The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV.

Model Name

Serial No.

CAUTION

To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted.

• Operate the TV only on 110 - 240 V AC (U.S.A./Canada 120 V AC)

Safety information

Declaration of Conformity

Trade Name: SONY Model: XBR-65X810C / XBR-55X810C Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Related Information

Angle brace (not supplied)

Stand

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Safety and Regulatory

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any inter ference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Only use Wireless LAN indoors when using it with IEEE

802.11a (5 GHz).

This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except Grant condition.

Note

This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service provider. Availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

Before setting up your TV

Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. See page 17 (Installing the TV to the Wall) if you want to mount the TV to a wall. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the supplied screws to complete the task. Look for the supplied Table-Top Stand instruction leaflet. Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

• Ensure your TV has adequate ventilation, see page 18.

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death.

Preventing the TV from Toppling

• Secure the TV to a wall and/or stand.

• Do not allow children to play or climb on furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:

 slippery, unstable and/or uneven surfaces.  furniture that can easily be used as steps, such as a

chest of drawers.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Route all AC power cords and connecting cables so that they are not accessible to curious children.

Recommended Measures to Secure the TV

Consider the following measures when securing your TV to a Stand (not supplied).

1 Secure the Stand for the TV.

Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.

• Attach the other side to the Stand.

2 Secure the TV to the Stand.

Screw hole on the rear cover

M6 machine screw (not supplied)

Rope or chain (not supplied)

Screw (not supplied)

8 - 12 mm

Screw M6

TV’s rear cover

Rope or chain

M6 eye bolts (not supplied)

Wall-mount holes

Rope or chain (not supplied)

Wall-anchor (not supplied)

8 - 12 mm

M6 eye bolt

TV’s rear cover

Use the optional hardware listed as follows (not supplied):

• M6 machine screw (screwed into the TV’s rear cover)

• A screw or similar (attach it to the Stand)

• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

The length of the M6 machine screw differs depending on the rope or chain diameter. Please see below illustration.

3 Anchor the TV to the wall by using bolts, wall anchor and

chain (or rope).

Please see below illustration for M6 eye bolt length.

Note

• Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.

• Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

Precautions

How to care for your BRAVIA TV

Safety is very important. Please read and follow the safety documentation (Safety Booklet) separately provided.

Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction provided on the package.

• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

The TV should also be placed on a stable surface to prevent it from toppling over children or pets at home, check regularly to ensure the TV is securely fastened.

(see page 3). If you have young

The BRAVIA® 4K TV Experience

Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “4K TV Experience.” This document will help you get the most out of your TV. Please take a moment to register your TV at:

U.S.A.: h ttp: //productreg istratio n.sony.com Canada: http://www.sony.ca/registration

Four Steps to a 4K TV Experience

Set, Source, Sound, and Setup.

1 Set

Now that you have made the best selection in LED backlit LCD TV technology, be sure to remove all of the accessories from the packaging before setting up your TV.

2 Source

To experience the stunning detail of your BRAVIA TV, you need access to HD programming.

• Upgrade your signal or content source to highdefinition (4K) by contacting your HD service provider.

This TV displays all video input signals in a resolution of 3,840 dots × 2,160 lines.

The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs.

INPUT VIDEO AUDIO

• Bring the astonishing resolution of your Sony 4K Ultra HD TV to life with Sony 4K Ultra HD Media Player. (The availability depends on region)

• Receive over-the-air HD broadcasts with an HDquality antenna connected directly to the back of your TV. Visit http://www.antennaweb.org for more information on antenna selection and setup.

• Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD equipment.

3 Sound

Complete the high-definition experience with a BRAVIA Sync™ surround sound system or A/V receiver from Sony.

4 Setup

Install your TV and connect your sources. See page 12 for sample connection diagrams. To help assure the highest quality for your 4K experience, use Sony HDMI (High-Definition Multimedia Interface) cables.

To learn more about 4K TV, visit:

U.S.A.: http://www.sony.com/HDTV Canada: http://www.sony.ca/hdtv

4K*11080/

24p/30p

SUPPORTED FORMATS

1080p*11080i

720/

24p/30p

720p*1480p 480i PC*

HDMI

4K/

COMPONENT

Audio L/R

VIDEO

*1 For details of supported formats, refer to the “Specifications” in this manual. *2 For supported PC formats refer to the Help Guide.

Compos ite

video

connection

Audio L/R

Parts and Controls



Ȫ ȫ

XBR-55X810C

XBR-65X810C

Controls and Indicators

 Remote Control sensor* / Light

sensor*

The illumination LED lights up or blinks according to the status of the TV.

•White

•Cyan

•Amber

/ Illumination LED

When turning on the TV/picture off mode/software update, etc.

When connecting with a mobile device wirelessly.

Timer is set.

 (Power)

 CH +/- (Channel)

 +/- (Volume)

 TV

Switch to a TV channel or input from other applications.

 (Input select)

Display and select the input source.

* Do not place anything near the sensor.

Inputs and Outputs

 LAN

 DIGITAL AUDIO OUT (OPTICAL)

/ VIDEO IN 1

For a composite connection*.

 VIDEO IN 2, /

COMPONENT IN

• For a composite connection:

Use VIDEO IN, and  (L/R) of / COMPONENT IN*.

• For a component connection:

Use Y, PB, PR, and  (L/R).

 (USB 1/2), (USB 3)

• Connecting a large USB device may interfere with other connected devices beside it.

• When connecting a large USB device, connect to the USB 1 jack.

 AUDIO OUT /

• To listen to the TV's sound through the connected equipment, press

HOME. Select [Settings]  [Sound]  [Headphone/Audio out] and then

select the desired item.

 HDMI IN 1/3/4

• If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 4. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.

 HDMI IN 2/MHL

• You can connect your MHL (Mobile High-definition Link) device using an HD quality MHL cable.

 REMOTE IR IN

REMOTE Serial Control

• These jacks are for receiving the external control signal. Enables extended control of the TV using RS232C via the IR IN and Serial Control jacks. IR IN : connect to the IR out terminal of the home controller. Serial Control : connect to the RS232C terminal of the home controller.

• Take care to not connect to headphones or an external audio system.

• If [RS232C control] is set to [On], [BRAVIA Sync settings] is not available.

 CABLE/ANTENNA

Connect to your cable or antenna.

* When connecting mono equipment, connect to

the L (MONO) audio jack.

Using Remote Control

IR (infrared) Remote Control

Remote Control Parts Description

 INPUT

Display and select the input source.

POWER/

Turn on or turn off the TV (standby mode).

SYNC MENU

Display the BRAVIA Sync Menu.

(Twin picture/PIP)*1*

Display two pictures simultaneously.

 Number buttons

Use with the 0-9 buttons to select digital channels.

PIC OFF*

Turn the picture off, while sound remains on.

 Color buttons

Execute correspondent function at that time.

DISPLAY

Display information about the channel/ program/input you are viewing.

NETFLIX

Access the “NETFLIX” online service.

HELP

Display Help Menu.

 ACTION MENU

Display a list of contextual functions.

Switch to a TV channel or input from other applications.

GUIDE*

Display the digital program guide.

BACK

Return to previous screen.

HOME

Display the TV Home Menu.

DISCOVER

Bring up the Content Bar to search for content.

//// (Item select/Enter)

 VOL +/– (Volume)

Adjust the volume.

JUMP

Jump back and forth between two channels or inputs. The TV alternates between the current channel or input and the last channel or input that was selected.

MUTING

Mute the sound. Press again to restore the sound.

CH +/–

Select the channel.

 AUDIO

Change the language for the program currently being viewed.

CC/SUBTITLE

Turn subtitles on or off (when the feature is available).

//////

Operate media contents on TV and connected BRAVIA Sync-compatible device.

WIDE

Change the screen format.

FOOTBALL

Turn Live Football Mode on or off (when the feature is available).

*1 The location, availability and function of

remote control button may vary depending on your country/region/TV model.

*2 Twin Picture/PIC OFF function will be available

from July 2015. You will receive Twin Picture/ PIC OFF function automatically as a network software upgrade. Make sure your TV is connected to the Internet. If you do not have a network connection, you will be able to download the software from the Sony support website using your PC. For details on how to upgrade, please visit the Sony support website.

Guidelines for IR Remote Control

• Point your remote control directly at the IR sensor located on your TV.

• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Connecting the TV

(Reference drawing for an F type plug)

1.5 mm max.

7 mm max.

Set Top Box

For more information on connections, refer to the Help Guide.

Note

• When connecting the cable to the Cable/ Antenna, input finger tighten only, over tightening the connection can damage the TV.

• For the FMP-X1, connect it to the HDMI IN 2 jack only (The availability depends on region).

• To select an input device connected to the TV, press INPUT.

Recommendation for an F type plug

Projection of the inner wire from the connection part must be less than 1.5 mm.

Showing a Set Top Box with COMPONENT connection

Connecting MHL Device

Use authorized MHL CABLE with MHL logo (not supplied)

MHL device

The TV simultaneously charges the MHL-compatible connected device while playing photo/ music/video files. You can use the TV remote control to control the connected MHLcompatible device.

Note

• If [Charge MHL during power off] is set to [On], you can continue charging the MHL-compatible device

even when the TV is in standby mode.

• Use authorized MHL 3 CABLE with MHL logo for 4K smartphone or mobile devices.

Showing HD BRAVIA® Sync™ Basic Connection

*1Side Panel

Blu-ray Disc

HD Cable Box or HD Satellite Receiver

A/V Receiver

SAT (Dish)

Cable/Antenna

Optical Connection

Rear of TV

*1Signifies a BRAVIA Sync capable device. *2The optical connection is only needed for A/V receivers that do not support ARC (Audio

Return Channel). Set the speaker settings to audio out, press HOME, then select [Settings]  [Sound]  [Speakers]  [Audio system]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.

Showing HD Basic Connection with Home Theater System

Cable/Antenna

Blu-ray Disc/DVD

SD Cable Box or SD Satellite Receiver

Cable/SAT (Dish)

Home Theater System

*Optical Connection

Rear of TV

Side Panel

* The optical connection is only needed for home theater system that do not support ARC

(Audio Return Channel) when connecting with HDMI. Set the speaker settings to audio out, press HOME, then select [Settings]  [Sound]  [Speakers]  [Audio system]. Set the HDMI CEC settings on the TV and AV receiver to allow for system audio control for ARC connections.

+ 33 hidden pages