Sony Trinitron Wega KV-SZ29, Trinitron Wega KV-SZ25, Wega KV-SR293, Wega KV-SR253 Operating Instructions Manual

2-674-730-11 (1)

Trinitron Color TV

‡§√◊ËÕß√í∫‚∑√∑í»πú’

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain
it for future reference.

Trinitron

§ŸË¡◊Õ°“√„™Èß“π

• °ËÕπ‡√‘Ë¡°“√„™Èß“π°√ÿ≥“ÕË“π§ŸË¡◊Õπ’È‚¥¬≈–‡Õ’¬¥∑—ÈßÀ¡¥·≈–‡°Á∫√—°…“§ŸË¡◊Õ‰«È

”À√—∫ÕÈ“ßÕ‘ß„π‚Õ°“µËÕʉª

GB

‰∑¬

KV-SZ29
KV-SZ25

© 2006 Sony Corporation

M50

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 220 – 240 V AC.

• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.

For your own safety, do not touch
any part of the TV, the power cord
and the antenna cable during
lightning storms.

Do not place any objects on the TV.
The apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.

Do not block the ventilation
openings of the TV. Do not install
the TV in a confined space, such
as a bookcase or built-in cabinet.

Do not open the cabinet and the
rear cover of the TV as high
voltages and other hazards are
present inside the TV. Refer
servicing and disposal of the TV
to qualified personnel.

For children’s safety, do not leave
children alone with the TV. Do not
allow children to climb onto it.

Do not operate the TV if any liquid
or solid object falls into it. Have it
checked immediately by qualified
personnel only.

Your TV is recommended for
home use only. Do not use the TV
in any vehicle or where it may be
subject to excessive dust, heat,
moisture or vibrations.

Clean the TV with a dry and soft
cloth. Do not use benzine, thinner,
or any other chemicals to clean the
TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape,
glue) on the painted cabinet of the
TV. Do not scratch the picture
tube.

To prevent fire or shock hazard,
do not expose the TV to rain or
moisture.

Install the TV on a stable TV stand
and floor which can support the
TV set weight. Ensure that the TV
stand surface is flat and its area is
larger than the bottom area of the
TV.

Do not plug in too many
appliances to the same power
socket. Do not damage the power
cord.

Pull the power cord out by the
plug. Do not pull the power cord
itself. Even if your TV is turned
off, it is still connected to the AC
power source (mains) as long as
the power cord is plugged in.
Unplug the TV before moving it
or if you are not going to use it for
several days.

2

Table of Contents

Installation

Securing the TV .................................... 4

Getting Started ..................................... 5

Setting up your TV

(“Initial Setup”) .................................... 6

Overview of Controls

TV front and rear panels ..................... 8

Using the remote control and

basic functions ...................................... 9

Advanced Operations

Selecting the picture and sound

modes .................................................. 11

Menu Adjustment

Introducing the WEGA GATE

navigator ............................................. 12

“Settings” Adjustment ...................... 13

Changing the “Picture” setting ........ 14

Changing the “Sound” setting ......... 16

Changing the “Channel Setup”

setting .................................................. 17

Changing the “Setup” setting .......... 19

GB

Additional Information

Connecting optional components ... 20

Troubleshooting ................................. 22

Specifications ...................................... 24

3

Installation

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.

20 mm

3.8 mm

screws clamps band

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

or

(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at
the rear of your TV.

or

(1) Attach each end of a cord or chain to

the provided holders at the rear of your
TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment
which can support the TV set weight.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

4 Installation

x Getting Started

1

Step 1

b

b

Insert the batteries (supplied) into the remote.

Note

• Do not use old or different types of batteries together.

Installation

Step 2

Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.

Tip

• You can also connect your TV to other optional components
(see page 20).

Step 3

Plug in the power cord, then press ! on the TV to
turn it on.

Note

• The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.

Step 4

Select

Confirm

Set up the TV by following the instructions of the
“Initial Setup” menu (see page 6).

End

Installation

5

x

Setting up your TV

(“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will
appear. You may change the menu language, preset the TV channels
automatically, sort or edit the channels and adjust the picture position using the
buttons on the remote control or TV front panel.

Press V or v to select the desired menu

1

language, then press .

The selected menu language appears.

Select

Press V or v to select “Yes”, then press

2

to preset the channels automatically.

The screen will indicate automatic
presetting is in progress.

After all available channels have been tuned
and stored, the “Program Sorting/Edit”
menu appears automatically on the screen.

Select

Program:

TV System: Auto
VHF Low

Confirm

Confirm

End

End

01

To skip automatic channel presetting, select
“No”, then press

If the message “No channel found. Please
connect cable/antenna” appears, check your
TV connections, then press

The “Program Sorting/Edit” menu enables

3

you to sort and edit the channels.

a) If you wish to keep the channels in the current

condition, press WEGA GATE to exit.

b) Press V or v to select the program

number with the channel you wish to
change. The selected channel will appear
on the screen.

c) If you wish to store the channels in a

different order:

1) Press b to enter sorting mode.

2) Press V or v to select the new program

6 Installation

.

.

number position for your selected channel,
then press B.

Program Sorting/Edit

PROG

Sorting:

Select

Program Sorting/Edit

PROG

Sorting mode

Select

SkipLabel

01

Off

02

Off

03

Off

04

Off

Edit:

Confirm

SkipLabel

01

Off

02

Off

03

04

Off

Confirm

End

Exit

Off01

Exit

d) If you wish to edit the channels, press

to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip, (block symbol).
Then press

.

1) To label, press V or v to select the
alphanumeric characters for the label.
Then press

.

2) To skip the program number, press V or v to
select “On”. Then press

.

You can skip this program number when
using PROG +/-.

3) To block unwanted program number,
press V or v to select

. Then press .

e) Repeat step b) to d) if you wish to change other

channels.

Press WEGA GATE to go to the next menu.

Press B or b to adjust the bars on the top

4

and bottom of the menu if they are
slanted, then press

.

“Picture V-Position” menu appears.

Select

Select

Select

Select

Confirm

Confirm

Confirm

Confirm

Exit

Installation

Exit

Exit

End

If the upper and lower bars are not

5

equally positioned to the top and
bottom of the screen, press V or v to
adjust them, then press

.

Select

End

Confirm

If no adjustment is necessary, then press .

To prevent this “Initial Setup” menu from

6

appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press

To allow this menu to appear again, select
“Yes”, then press

Tip

• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

.

Select

Confirm

.

Installation

7

Overview of Controls

x TV front and rear panels

TV rear panel

1

(MONO) (MONO)

L

R

Y

C

B

L

C

R

R

qf

qsqd

qa

TV front panel

0

L(MONO) R

2

9

SOUND

MODE

WEGA GATE

678

45

PROG

3

2

1

Button/Terminal Function Page

1 ! Turn off or turn on the TV. 5
2 1 Standby indicator. 5
2 Wake Up indicator. 10
3 Remote control sensor. –
4 PROG +/– Select program number. –
5 2 +/– Adjust volume. –
6 t Select TV or video input. 20

WEGA GATE menu operations

4,5

, , ,

Select and adjust items. 12

6 Confirm selected items. 12
7

WEGA GATE

Display or cancel WEGA GATE menu. 12

8 SOUND MODE Select sound mode options with a 5-Band Graphic 11

Equalizer display.

9 i Headphone jack. –
0 t2 Video input terminal 2. 20
qa 8 Antenna input terminal. 20
qs T Monitor output terminal. 20
qd Component video input terminal. 21
qf t1 Video input terminal 1. 20

8 Overview of Controls